UNI BRIGHT Moon 800 Surface Mounted Luminaire Led Instruction Manual

June 13, 2024
UNI-BRIGHT

UNI BRIGHT Moon 800 Surface Mounted Luminaire Led

UNI BRIGHT Moon 800 Surface Mounted Luminaire Led 

Safety

For indoor use only.
This fitting should only be installed in rooms where direct contact with water is impossible.

Luminaire not suitable for covering with insulating material.

**IP40**  Protected against objects ≥ 1 mm. Not protected against water.

Correct disposal of this product (electrical & electronical equipment waste)

  • The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. Improper installation can result in serious injuries and/or damage to property.
  • For safety and guarantee reasons it is prohibited to make any modifications to the unit.

DIMENSIONS

MN80075W White Ê 800 mm SMD LED 75W 3000K – 4000K 8000 lm
MN80075B Black Ê 800 mm SMD LED 75W 3000K – 4000K 8000 lm

Dali Driver included

Warning

  • WARNING !
    To prevent electrical shock – Always switch off electricity supply before installation and maintenance.

Installation

  • Please follow the sequence of installation step by step

Surface Mount Installation



Guidance for Wattage(Current) Selection (For MERRYTEK driver only)

Diameter| Watt| Rated Current| LED Driver Current Selection by DIP-switch
<!) 800| 40W| | | Table 1-Rated output power and current sets| Pin 1| Pin 2| Pin 3| rated [mA]|
---|---|---|---|---|---
I out mA| 300| 350| 450| 500| 550|
–| –| –| 300|
U min(V)| 80| 80| 80| 80| 80|
Um axM| 330| 330| 266| 240| 219| ON| –| –| 350|
P min(W)| 24| 28| 36| 40| 44| –| ON| –| 450|
P max(W)| 99| 115.5| 120| 120| 120|
–| –| ON| 500|
Ta[°C]| 50| 50| so| 50| so|
Tc[°C]| 80| 80| 80| 80| 80| ON| –| ON| 550|
Line current, nominal@230VmA| 463| 540| 561| 561| 561| –| ON| O N| 650|
Maxpower lose@230V mA| 7.4| 8.7| 9| 9| 9|
ON| ON| ON| 700|
input power@230VmA| 106.4| 124.2| 129| 129| 129|
|
|
|
|
| | |
Guidance For Wattage(Current) Selection (For OSRAM & TRIDONIC driver only)

Diameter| Watt| Rated Current| LED Driver Current Selection by DIP switch

800| 47W| 350mA| | **Table 1** **–** **Rated output power and current sets**| Pin 1| Pin 2| rated [mA]| ---|---|---|---|--- I out(mA)| 350| 400| 500| 550| U min M| 70| 70| 70| 70| OFF| OFF| 350| U max [V]| 217| 187| 150| 136| P min [W]| 24.5| 28| 35| 38.5| OFF| ON| 400| P max [W]| 77| 75| 75| 76| Ta [°C]| 50| 50| 50| 50| ON| OFF| 500| Tc  [°C I| 75| 75| 75| 75| Line Current, nominal@23 0V mA| 370| 370| 370| 370| Max PowerLoss@230VfW]| 6| 6| 6| 6| ON| ON| 550| Input Power@230V [W]| 47.3| 59.1| 83| 83| SSW| 400mA 68W| S00mA 75W| 550mA

Warning: DIP switch selection must comply with guidance, otherwise product will be overloaded!

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals