UNI-BRIGHT MN50042WCCT Surface Mounted LED Luminaire Installation Guide
- June 13, 2024
- UNI-BRIGHT
Table of Contents
UNI-BRIGHT MN50042WCCT Surface Mounted LED Luminaire
Safety
-
For indoor use only.
-
This fitting should only be installed in rooms where direct contact with water is impossible.
-
Luminaire not suitable for covering with insulating material.
-
IP54 : Limited protection against dust ingress. Protected against splash water from any direction
-
Correct disposal of this product (electrical & electronical equipment waste)
-
The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country.
-
Improper installation can result in serious injuries and/or damage to property.
-
For safety and guarantee reasons it is prohibited to make any modifications to the unit.
This product contains a light source of energy efficiency class
| MN50042WCCT | White | 0 500 mm | SMD LED | 42W | 2700K/3000K/4000K | 3100 Lm |
|---|---|---|---|---|---|---|
| MN50042BCCT | Black | 0 500 mm | SMD LED | 42W | 2700K/3000K/4000K | 3100 Lm |
Driver included
WARNING!
To prevent electrical shock – Always switch off electricity supply before
installation and maintenance.
CCT-Select switch:
Installation
Please follow the sequence of installation step by step
- Prepare 3 holes and install screw anchors.
- Install back of the fixture to ceiling or wall and connect wires.
- Put the cover back on the fixture.
2100 Antwerpen Belgium · T +32(0)3 6416140
F +32(0)3 6451831
www.unibright.be