sauermann Si-PRO-DP-50 Si-C320 Transmitter Monitoring And Regulation User Guide
- June 13, 2024
- sauermann
Table of Contents
SI-PRO-DP AND SI-ACC-WLM
MODULES
Quick Start Guide
Quick Start Guide
These operating instructions describe how to connect a wireless module and a
pressure module into a Si-C320 transmitter.
Please refer to the operating instructions available at sauermanngroup.com for
safe use of the Si-C320 and detailed information.
Do not give these devices to a child.
Symbols used
For your safety and in order to avoid any damage of the device, please read carefully the notes preceded by the following symbol:
Pressure module
While connecting the differential pressure module, the transmitter must not be energized.
These instructions apply to the following pressure modules references:
Si-PRO-DP-50/Si-PRO-DP-250/Si-PRO-DP-1000 and Si-PRO-DP-10000.
Once the module is connected, close the transmitter and refer to the full user manual to set the differential pressure range.
Wireless communication module
These instructions apply to the following wireless communication module: Si- ACC-WLM
While connecting the wireless module, the transmitter must not be energized.
Once the module is connected, close the transmitter and refer to the full user manual to set the wireless communication.
Relay module
These instructions apply to the following 4-relay module: Si-M4R
While connecting the 4-relay module, the transmitter must not be energized.
Make the most of your device’s capabilities by downloading the app.
https://sauermanngroup.com/en-INT/resource-center/softwares
Access all documentation about the device.
Customer service portal
Use our Customer service portal to contact us
https://sauermann-en.custhelp.com
QSG – Si-PRO-DP_Si-ACC-WLM_Si-M4R – 01/09/2023 – Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>