ESORUN StandUP T3 Wireless Output Mobile User Manual
- June 13, 2024
- ESORUN
Table of Contents
User Manual
Model: StandUP T3
Accessories:
1 MagSafe Charging Station
1 USB-Ato Type C Cable
1* User Manual
Note:
Thank you for your acquisition of this Magsafe charging station, please
read this manual carefully before using this product.
SPECIFICATIONS
Type C Input | 5V/3A; 9V/2.22A, 12/2A |
---|---|
USB-A Output | 5V/0.9A |
Wireless Output(Mobile) | 5W, 7.5W, 10W, 15W |
Airpods Output | 5W (Max) |
iWatch Output | 2W |
Simultaneous Output | 10W+5W+2W+5V/0.4A |
Dimension | 6.22.980.6 inch (157.675.715.3 mm) |
Weight | 5.82 oz (165 g) |
PRODUCT STRUCTURE
- Magnetic Charging Area for iPhone 12/13/14/15 Series
- Wireless Charging Pad for Airpods
- Wireless Charging Pad for Apple Watch
- Type-C Input
- USB-A Output
- Charging Indicator
Angle Adjustable
Warning
- The stand will generate heat when charging (it is normal for the wireless charging technology). Please use it in a well-ventilated area when charging.
- Keep the power bank stand away from heat sources, direct sunlight, humidity, water or other liquids.
- Do not operate the stand if it is wet or damaged to prevent electric shock and explosion. Do not repair without unauthorized.
- Do not use the power bank stand with wet hands.
- Do not use the unit for purposes other than its intended use.
HOW TO USE
Recharging
Pass Through Charging
You can put your iPhone 12/13/14/15 and subsequent series, Airpods and
Apple watch on the corresponding charging area and connect this charging
station to the power source (PD 20W or QC 3.018W). It will charge the stand
itself and your iPhone 12/13/14 and subsequent series ,Airpods and Apple watch
at the same time.
Power digital led screen
Wireless Charging
Please fit the product with the back of your iPhone (12/13/14/15 and
subsequent series) or other wireless charging phone (which with magnetizing
ring attached), it will charge your phone automatically via the built-in
magnetic wireless charging, Max to be 15W, iPhone series is 7.5W.
Note:
- The multi-function wireless power stand is mainly used for 12/13/14/15 and subsequent series, or phones with magnetizing rings attached.
Wireless Charging for Airpods
Please lay down your TWS earphone to the charging area and press the switch
button(5W Max).
Wireless Charging for Apple Watch
Make sure your Apple Watch is stick to the Magnet of the Wireless Charger for
Apple Watch It will automatically detect the Apple Watch and discharge it.
When your wireless charging is not working properly
- Clean the clutter on the wireless charge.
- Please make sure the wireless charging coil is correctly positioned with the phone coil.
- When the wireless charger is overheating, keep your mobile device away from the wireless transmitter. Please wait for the wireless transmitter to cool down before trying to charge it.
FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of thedevicemust be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>