Viewsonic XG2705 Computer Monitor User’s Guide

: June 15, 2024
: Viewsonic

Table of Contents

Viewsonic XG2705 Computer Monitor
Safety Precautions
Introduction
Frequently Asked Questions
User’s Guide
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Viewsonic XG2705 Computer Monitor

Viewsonic-XG2705-Computer-Monitor-product

Thank you for choosing ViewSonic®

As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity.

At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.

Once again, thank you for choosing ViewSonic®!

Safety Precautions

Please read the following Safety Precautions before you start using the device.

Keep this user guide in a safe place for later reference.
Read all warnings and follow all instructions.
Sit at least 18″ (45 cm) away from the device.
Allow at least 4″ (10 cm) clearance around the device to ensure proper ventilation.
Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation.
Do not use the device near water. To reduce the risk of fire or electric shock, do not expose the device to moisture.
Avoid exposing the device to direct sunlight or other sources of sustained heat.
Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that may increase the temperature of the device to dangerous levels.
Use a soft, dry cloth to clean the external housing. For more information, refer to the “Maintenance” section on page 34.
Oil may collect on the screen as you touch it. To clean the greasy spots on the screen, refer to the “Maintenance” section on page 34.
Do not touch the screen surface with sharp or hard objects, as it may cause damage to the screen.
When moving the device, be careful not to drop or bump the device on anything.
Do not place the device on an uneven or unstable surface. The device may fall over resulting in an injury or a malfunction.
Do not place any heavy objects on the device or connection cables.
If smoke, an abnormal noise, or a strange odor is present, immediately turn the device off and call your dealer or ViewSonic®. It is dangerous to continue using the device.
Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, obtain an adapter and do not attempt to force the plug into the outlet.
When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED.
Protect the power cord from being trodden upon or pinched, particularly at the plug, and at the point where it emerges from the equipment. Ensure that the power outlet is located near the equipment so that it is easily accessible.
Only use attachments/accessories specified by the manufacturer.
When a cart is used, use with caution when moving the cart/equipment combination to avoid injury from tipping over.
Disconnect the power plug from the AC outlet if the device is not being used for a long period.
Refer all servicing to qualified service personnel. Service will be required when the unit has been damaged in any way, such as:
- if the power supply cord or plug is damaged
- if the liquid is spilled onto or objects fall into the unit
- if the unit is exposed to moisture
- if the unit does not operate normally or has been dropped
NOTICE: LISTENING THROUGH EAR-/HEADPHONES AT A HIGH VOLUME FOR EXTENDED PERIODS CAN CAUSE HEARING DAMAGE/HEARING LOSS. When using ear-/headphones, adjust the volume to appropriate levels, or hearing damage may result.
NOTICE: THE MONITOR MAY OVERHEAT AND SHUTDOWN! If the device shuts down automatically, please turn on your monitor again. After rebooting, change your monitor’s resolution and refresh rate. For details, please refer to the graphics card’s user guide.

Introduction

Package Contents

Monitor
Power cord
Video cable
Quick start guide

NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.

Frequently Asked Questions

Can I mount the ViewSonic XG2705 monitor on the wall, and what are the requirements for wall mounting?

Yes, you can mount the monitor on the wall using UL Certified wall mount kits. The monitor supports a VESA mount standard of 100 x 100 mm. You will need a mounting bracket with a hole pattern of 100 x 100 mm and compatible screws (M4 x 10 mm). Wall mount kits are sold separately.

How do I adjust the viewing angle of the monitor?

You can adjust the viewing angle of the ViewSonic XG2705 monitor by tilting it forwards or backwards. The tilt angle adjustment range is from -5˚ to 15˚. While adjusting, support the stand firmly with one hand while tilting the monitor with the other hand.

How do I use the control panel keys on the ViewSonic XG2705 monitor?

The control panel keys allow you to access the Quick Menu, activate Hot Keys, navigate the On-Screen Display (OSD) Menu, and change settings. The Quick Menu can be activated by pressing the 1 (Shortcut) key. The keys have various functions depending on the menu you are in.

How do I use the OSD Lock/Unlock feature on the ViewSonic XG2705 monitor?

To lock or unlock the OSD (On-Screen Display) Menu, press and hold the 3 and 5 keys simultaneously for 10 seconds. When the OSD Menu is locked, a message indicating OSD Locked will appear on the screen.

What should I do if the control panel keys on the Viewsonic XG2705 monitor do not respond?

If the control panel keys do not work, ensure that you press only one key at a time. Additionally, you can try restarting your computer, as this may help resolve any communication issues between the monitor and your computer.

Some OSD menus are not selectable on my Viewsonic XG2705. How can I access these menus?

If certain OSD menus are not selectable, you can try adjusting the ViewMode or input source. You can also attempt to reset the monitor to its factory settings, which may restore access to these menus.

How can I enable audio output from the ViewSonic XG2705 monitor?

To enable audio output, ensure that your earphones or headphones are properly connected to the mini stereo jack on the monitor. Check that the volume is not muted, and adjust the Audio Input setting as needed.

The screen of my Viewsonic XG2705 appears yellow. What might be causing this, and how can I resolve it?

How can I ensure that the control panel keys on the Viewsonic XG2705 monitor work properly?

To ensure that the control panel keys work correctly, press only one key at a time. This should help in responsive key input. Additionally, consider restarting your computer if the issue persists.

How can I access the OSD Menu of Viewsonic XG2705 if it does not appear on the screen or if the OSD controls are inaccessible?

If the OSD Menu does not appear or the controls are inaccessible, Check if the OSD Menu is locked. If it is, press and hold the 3 and 5 keys simultaneously for 10 seconds to lock/unlock it. Turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. If necessary, reset the monitor to its factory settings.

How do I make sure the screen image of Viewsonic XG2705 is centered correctly on the monitor?

To ensure that the screen image is centered correctly, you can Adjust the horizontal and vertical controls using the OSD Menu. Check the Aspect Ratio settings. If required, reset the monitor to its factory settings to restore the default centering.

The screen image of Viewsonic XG2705 is too light or dark. How can I adjust it?

To adjust the screen image's brightness and contrast Use the OSD Menu to access the brightness and contrast settings. You can fine-tune these settings to achieve the desired image quality. If needed, you can also reset the monitor to its factory settings.