Ubiquiti NS-5AC Nano Station Quick Mount User Guide
- June 13, 2024
- UBIQUITI
Table of Contents
Ubiquiti NS-5AC Nano Station Quick Mount
Product Information
The Quick-Mount is a versatile mounting solution designed for a variety of Ubiquiti CPE (Customer Premises Equipment) devices. It includes several components such as the Mount Arm, Universal BallMount, Bracket Mount, Rotation Collar, Stacking Washer, and Ball Mount Washer.
The supported products for the Quick-Mount are:
- NBE-2AC-13
- NBE-M5-16
- UBB
- GBE
These products can be installed using the Universal Ball Mount.
Additionally, the NBE-5AC-Gen2 and NBE-M5-19 can also be installed using the Universal Ball Mount along with the Metal Washer. The loco5AC, NS-5AC, and LTU-Lite require the Ball Mount Assembly for installation.
Package Contents
Supported Products
The Quick Mount is compatible with the GigaBeam™, LTU™ Lite, NanoBeam®,
NanoStation®, NanoStationloco, and UniFi® Building-to-Building Bridge.
- NBE-2AC-13, NBE-M5-16, UBB, or GBE using the Universal Ball Mount
- NBE-5AC-Gen2 or NBE-M5-19 using the Universal Ball Mount and Metal Washer
- loco5AC, NS-5AC, or LTU-Lite using the Ball Mount Assembly
Hardware Overview
Stacking Washer
Part of the Quick-Mount assembly that locks the Rotation Collar into place.
Part of the Quick-Mount assembly that stabilizes the base of the Mount Arm.
Mount Arm
Adjustable mount compatible with a variety of Ubiquiti CPE devices.
Ball Mount Washer
Used in conjunction with the Universal Ball Mount when installing the
NBE‑5AC‑Gen2 or NBE-M5-19.
Universal Ball Mount
Used when installing the NBE-5AC-Gen2, NBE-2AC-13, NBE-M5-19, NBE-M5-16, UBB,
or GBE.
Bracket Mount
Used when installing the loco5AC, NS‑5AC, or LTU-Lite.
Models
- NBE-2AC-13
- NBE-M5-16
- UBB
- GBE
Components
Note: The device’s Lock Ring will also be used.
Models
- NBE-5AC-Gen2
- NBE-M5-19
Components
Note: The device’s Lock Ring will also be used.
Models
- loco5AC
- NS-5AC
- LTU-Lite
Installation
Before You Begin
Insert the Mount Arm into the Rotation Collar and press until it is locked in.
Note: The screw end should extend past the Rotation Collar for installation, as shown below.
Note: Add the Ball Mount Washer when installing the NBE-5AC-Gen2 or NBE-M5-19.
Specifications
| DIMENSION | 104 x 122 x 81 mm (4.09 x 4.80 x 3.19″) |
|---|---|
| Weight | 375 g (0.83 lb) |
| Device Support | |
| Ball Mount Assembly | loco5AC, NS-5AC, or LTU-Lite |
Universal Ball Mount Universal Ball Mount with Ball
Mount Washer
| NBE-2AC-13, NBE-M5-16, UBB, or GBE NBE-5AC-Gen2, NBE-M5-19
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an
individual basis, and, where applicable, specify arbitration instead of jury
trials or class actions.
Declaration of Conformity
Online Resources
© 2019-2020 Ubiquiti Inc. All rights reserved.
References
- Ubiquiti - Warranty
- community.ubnt.com/
- Ubiquiti - Compliance
- Software Downloads - Ubiquiti
- Ubiquiti - Warranty
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>