MEAN WELL APC-35 Series 35W Single Output Switching Power Supply Owner’s Manual

MEAN WELL APC-35 Series 35W Single Output Switching Power Supply

Features

• Constant current mode power supply
• Universal AC input / Full range
• Withstand 300VAC Surge input for 5 seconds
• Protections: Short circuit / Over voltage
• Fully isolated plastic case
• Small and compact size
• Cooling by free air convection
• IP42 design
• 100% full load burn-in test
• Suitable for related fixtures or appliances (such as LED Decoration or Advertisement devices)(Note. 6)
• Low cost / High reliability
• 2 years warranty

GTIN CODE

SPECIFICATION

MODEL| APC-35-350| APC-35-500| APC-35-700| APC-35-1050
---|---|---|---|---

OUTPUT

| RATED CURRENT| 350mA| 500mA| 700mA| 1050mA
DC VOLTAGE RANGE| 28~100V| 25~70V| 15~50V| 11~33V
RATED POWER| 35W| 35W| 35W| 34.7W
CURRENT RIPPLE| 5.0%
CURRENT ACCURACY| ±8.0%
SETUP, RISE TIME| 1500ms, 40ms / 230VAC          1500ms, 40ms / 115VAC at full load
HOLD UP TIME (Typ.)| 20ms/230VAC      12ms/115VAC at full load

INPUT

| VOLTAGE RANGE Note.2| 90 ~ 264VAC          127 ~ 370VDC
FREQUENCY RANGE| 47 ~ 63Hz
EFFICIENCY(Typ.)| 84%| 84%| 84%| 84%
AC CURRENT| 0.5A/230VAC;0.75A/115VAC
INRUSH CURRENT(Typ.)| COLD START 45A(twidth=490μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 5 units (circuit breaker of type B) / 9 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| 0.25mA / 240VAC
PROTECTION| OVER VOLTAGE| 110 ~ 130V| 77 ~ 91V| 55 ~ 65V| 36 ~ 43V
Protection type : Shut down o/p voltage, re-power on to recover

ENVIRONMENT

| WORKING TEMP.| -30 ~ 70℃(Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.2%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

(Note 5)

| SAFETY STANDARDS| UL8750 (only for APC-35-700&1050), CSA-C22.2 No. 250.0-13 (only for APC-35-1050), BIS IS15885(only for APC-35-700&1050), EAC TP TC 004,IP42, BS EN/EN 62368-1 approved
WITHSTAND VOLTAGE| I/P-O/P:3KVAC
ISOLATION RESISTANCE| I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to BS EN/EN55032,BS EN/EN61000-3-2 Class A,BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN55035,BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), EAC TP TC 020

OTHERS

| MTBF| 4955.9K hrs min.       Telcordia SR-332 (Bellcore) ; 550.4K hrs min.       MIL-HDBK-217F (25℃)
DIMENSION| 845729.5(LWH)
PACKING| 0.18Kg; 72pcs/14Kg/0.92CUFT
NOTE| 1.   All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2.   Derating may be needed under low input voltage. Please check the static characteristic for more details.

3.   The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

4.   The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

5.   For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf

6.   This product is not intended for LED lighting luminaire applications in the EU.(In the EU the LPF/NPF/XLG series are recommended.)

※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

35W Single Output Switching Power Supply

Mechanical Specification

Block Diagram

Derating Curve

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>