eurolite AF-180 DMX Stage Fan User Manual

eurolite AF-180 DMX Stage Fan User Manual

INTRODUCTION

Welcome to Eurolite! Thank you for choosing one of our products. Eurolite is your connection to the world of show with an unparalleled variety of products, both for professionals and beginners.

If you follow the instructions given in this manual, we are sure that you willenjoy this product for a long period of time. This user manual will show you how to install, set up and operate your new Eurolite product.

Users of this product are recommended to carefully read all warnings in order to protect yourself and others from damage. Please keep this manual for future needs and pass it on to further owners.

Product features

• Great effect when used e.g. with fog, snow and bubble machines
• Output volume precisely adjustable (1-100 %)
• Air discharge angle adjustable
• Control: stand-alone, DMX and wireless DMX(optional)
• Quick truss installation via quick-lock omega brackets
• Rugged metal housing with handle for truss installation

Experience Eurolite.
Product videos, suitable accessories, firmware and software updates, documentation and the latest news about the brand. You will find this and much more on our website. You are also welcome to visit our YouTube channel and find us on Facebook.

www.eurolite.de

www.youtube.com/ eurolitevideo

www.facebook.com/ Eurolitefans

Package contents

• Wind machine
• Power cable
• Omega brackets
• these instructions

IMPORTANT SAFETY INSTRUCTIONS

WARNING!
Please read the safety warnings carefully and only use the product as describe in this manual to avoid accidental injury or damage.

Intended use

• This DMX-controlled machine is designed to circulate large amounts of air. This device is designed for professional use in the field of event technology (e.g. on stage, for exhibitions or theater productions).
• Only use the device according to the instructions given herein. Damages due to failure to follow these operating instructions will void the warranty! We do not assume any liability for any resulting damage.
• We do not assume any liability for material and personal damage caused by improper use or non-compliance with the safety instructions. In such cases, the warranty/guarantee will be null and void.
• Unauthorized rebuilds or modifications of the device are not permitted for reasons of safety and render the warranty invalid.

Danger due to electricity

• The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not store it in rooms exposed to moisture.
• To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the device.
• Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never defeat the protective ground of a mains cable. Failure to do so could result in damage to the device and possibly injure the user.
• The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
• Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
• The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
• Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
• Unplug the device during lighting storms, when unused for long periods of time or before cleaning.
• Do not expose the device to any high temperatures, direct sunlight, dripping or splashing water, strong vibrations or heavy mechanical stress.
• Do not place any objects filled with liquids on the device.
• Do not place any open sources of fire, such as burning candles, on or directly next to the device.
• Make sure that objects cannot fall into the device, in particular metal parts.
• Only have repairs to the device or its mains cable carried out by qualified service personnel. Repairs are required when the device or the mains cable is visibly damaged, liquid has been spilled or objects have fallen into the device; when the device has been exposed to rain or moisture, has been dropped or malfunctions occur.
• Cleaning of the device is limited to the surface. Make sure that moisture does not come into contact with any areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft lint-free and moistened cloth. Never use solvents or aggressive detergents.

Danger to children and people with restricted abilities

• This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly. Never leave this device running unattended.
• This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Warning – risk of burns and fire

• The admissible ambient temperature range (Ta) is -5 to +45°C. Do not operate the device outside of this temperature range.
• Do not use the device near highly flammable materials. Always place the device at a location where sufficient air circulation is ensured. Leave 50 cm of free space around the device. Never cover the air vents of the housing.
• Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power cord by the plug. Never pull out the plug by tugging the power cord.
• For commercial use the country-specific accident prevention regulations of the government safety organization for electrical facilities must be complied with at all times.

Warning – risk of injuries

• Never touch the fan blades with your hands. Do not put objects in the fan blades.
• Special caution applies to persons with long hair, long hair can be sucked in and get caught in the fan, serious injuries can be the result! Make sure that persons with long hair cannot stay in the immediate vicinity of the device!
• Ensure that the ventilation openings are always free of obstructions that could affect the air flow. Make sure that dust, sand, paper, clothing, etc. cannot be sucked in.
• The device must not be used in conjunction with a timer or similar automatic timer.
• Make sure that the product is set up or installed safely and expertly and prevented from falling down. Comply with the standards and rules that apply in your country, in particular EN 60598-2-17.
• If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer. Improper installation can result in bodily injury and or damage to property.
• The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety precautions.
• For overhead use, always secure the device with a secondary safety attachment such as a safety bond or safety net.
• Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.
• For commercial use the country-specific accident prevention regulations of the government safety organization for electrical facilities must be complied with at all times.

Caution – material damage

• Never switch the device on and off at short intervals. This will considerably reduce the service life of the device.
• If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately. The resulting condensation may destroy the device. Allow the device to reach room temperature before connecting it. Wait until the condensation has evaporated.
• Please use the original packaging to protect the device against vibration, dust and moisture during transportation or storage.
• If a serial number label is affixed to the device, do not remove the label as this would make the guarantee void.

PROTECTING THE ENVIRONMENT

Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal which is not harmful to the environment. Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information. Remove any inserted batteries and dispose of them separately from the product.

OPERATING ELEMENTS AND CONNECTIONS

1. Display and operating buttons
2. Safety eyelet
3. Protector
4. QuickDMX port
5. 3-pin DMX512 connectors
6. 5-pin DMX512 connectors
7. Handle
8. Fan blades
9. Fixation screw
10. Power input
11. Power output

SETUP

Placing the unit

• Remove all packing materials from the shipping box. Make sure that there are no packing remnants.
• Only install the machine on scratch resistant and water resistant surfaces.
• Please make sure that the operating environment is free of solid or liquid, easily movable objects which could be knocked over, sucked in or accelerated by the wind current.
• To adjust the output angle, release the fixation screws (8), adjust the desired angle and retighten the fixation screws.
• Connect the mains plug into a wall socket (230 V). Thus, the device is switched on. Now make the necessary menu settings using the operating buttons. To turn the machine off, disconnect it from the power supply.
• You may now use the machine to vary the output of fog machines or snow and bubble machines (e.g. spread fog higher and further in the room).

Suspended installation

WARNING!
Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure that the device is installed securely and cannot fall down. The installation must be carried out by a specialist who is familiar with the hazards and the relevant regulations.

• The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.

• Block access below the work area and work from a stable platform when installing the device.

• Use rigging hardware that is compatible with the structure and capable of bearing the weight of the device. Please refer to the “Accessories” section for a list of suitable rigging hardware.

• Screw one clamp each via a M10 screw and self-locking nut onto the Omega holders. Insert the quick-lock fasteners of the first Omega holder into the respective holes at the bottom. Tighten the quick-lock fasteners fully clockwise. Install the second Omega holder.

  1. Clamp
  2. Quick-lock fastener
  3. Omega holder
     

• Secure the device with a safety bond or other secondary attachment. This secondary safety attachment must be sufficiently dimensioned in accordance with the latest industrial safety regulations and constructed in a way that no part of the installation can fall down if the main attachment fails. An appropriate eyelet is mounted on the device for fixation of the safety bond. Fasten the safety bond in such a way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm.

• After installation, the device requires inspections periodically to prevent the possibility of rot, deformation and looseness

OPERATION

The machine can be operated manually with the operating buttons at the control panel or a DMX controller.

Manual output
Unplug the DMX cable to operate the device manually. Then press the MENU button repeatedly until the display indicates VOLUME OUT. Set the desired amount of wind (1-100 %). Confirm with the ENTER button.

DMX CONTROL

DMX512 controller
The unit features 3-pin and 5-pin XLR plugs for DMX connection.

• Connect the output of your DMX controller to the DMX IN jack of the machine with a DMX cable.
• Connect the DMX OUT jack of the machine to the DMX input of the next unit in the chain. Always connect one output to the input of the next unit until all units are connected.
• At the last unit, the DMX cable has to be terminated. Plug the terminator with a 120 Ω resistor between Signal (–) and Signal (+) in the DMX output of the last unit.
• If the cable length exceeds 300 m or the number of DMX devices is greater than 32, it is recommended to insert a DMX level amplifier to ensure proper data transmission.

Quick DMX wireless receiver
The device features an alternative DMX input for a QuickDMX receiver (sold separately). This connector allows for wireless transmission of DMX control signals to the device. The connector is designed as a USB port which provides the required 5 V operating voltage for the receiver. With QuickDMX devices, extensive cabling between the DMX controller and the device is not required.

Adjusting the DMX start address
When the machine is controlled via DMX signal, DMX mode is activated. The display indicates the current DMX start address. To ensure that the control signals are properly directed to the machine, it must be adjusted to the DMX start address provided for it on the DMX controller. Press the ENTER button. Then use the buttons ▲ and ▼ to set the address between 1 and 512. Confirm with the ENTER button. You may now start operating the machine via your DMX controller.

Note

• Please make sure that you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on the DMX data link. If two, three or more devices are addressed similarly, they will work similarly.

DMX functions
For operation with a controller with DMX512 protocol, the machine is equipped with 1 control channel.

CLEANING AND MAINTENANCE

• Regular cleaning
• Clean the machine with compressed air or a vacuum cleaner. Do not clean the unit with a high pressure cleaner.
• Disconnect the product from power before cleaning.
• Refer all servicing to qualified personnel.

Maintenance

• Check the power cord for damage and discoloration.
• Clean the protective grilles on the front and sides of the unit.
• Check for unusual noises.
• Keep the unit clean.
• Always make sure that the wind machine is only connected to an earthed socket.
• To move the machine, hold it only by the handle.
• Do not pull on the mains plug.

Notes

• There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as this may result in damage. Maintenance and service operations are only to be carried out by authorized dealers.
• Should you need any spare parts, please use genuine parts. Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Specifications are subject to change without notice due to product improvements.

**Pin connections:

**

Accessories

Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germany
D00148498 Version 1.0 Publ. 19/06/2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>