Yealink Panel RoomSensor User Guide
- June 4, 2024
- Yealink
Table of Contents
Panel RoomSensor
User Guide
Package Contents
Hardware Component Instructions
-
Press the Test key to enter the test mode*. -
Press the Test key for about 5s to reset the factory.
-
You can rotate the PIR len or glue the PIR blocking sticker to shield the areas that you don’t want to detect. -
Test Mode: For debugging during installation. If a person is detected, the occupancy status light will always be on until no person is detected.
Power Supply
Installation
• Mount on the Ceiling
• Mount on the Wall
Declaration of Conformity
We, YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD
Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen
City, Fujian, P.R. China
Manufacturer: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD
Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen
City, Fujian, P.R. China
DATE: 22th /August/2021 declare that the product
Type: Room Sensor
Model: RoomSensor meets the essential requirements and other relevant
provisions according to the following
EC directive Directive: 2014/30/EU, 2014/35/EU, RED 2014/53/EU
Conformity
The product complies with the following standards:
Safety: EN 62368-1:2014+A11:2017
EMC: EN 55032:2015+A11:2020
EN 55035:2017+A11:2020
EN61000-3-2: 2014
EN61000-3-3: 2013+A1:2019
Radio: ETSI EN 301 489-1 V2.2.3, ETSI
EN 301 489-17 V3.2.4, ETSI EN 300 328 V2.2.2;
Health: EN 50663:2017; EN 62479:2010
Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the
Council of 8 June 2011 and 4 June 2015 on the restriction of the use of
certain hazardous substances in electrical and electronic equipment(RoHS 2.0)
Directive 2012/19/EU of the European Parliament and of the Council of
4.July.2012 on Waste electrical and electronic equipment(WEEE) Regulation (EC)
No.1907/2006 of the European Parliament and of the Council of 18.December.2006
on Registration, Evaluation, Authorization, and Restriction of Chemicals
(REACH)
NAME: Huahu Wang
DATE: 22th/Aug /2021
TITLE: Manager
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Address: Strawinskylaan 3127, Atrium Building, 8th floor,
1077ZX Amsterdam, the Netherlands
Telephone: +31 (0) 64 61 11 373
Email: EUROPE@Yealink.com
Regulatory Notices
Operating Ambient Temperatures
- Operating temperature: +14 to 122°F (-10 to 50°C)
- Relative humidity: 5% to 90%, non-condensing
- Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty Our product warranty is limited only to the unit itself, when used
normally in accordance with the operating instructions and the system
environment. We are not liable for damage or loss resulting from the use of
this product, or for any claim from a third party. We are not liable for
problems with the Yealink device arising from the use of this product; we are
not liable for financial damages, lost profits, claims from third parties,
etc., arising from the use of this product.
DC symbol
is the DC voltage symbol.
Restriction of Hazardous Substances Directive (RoHS) This device complies with
the requirements of the EU RoHS Directive. Statements of compliance can be
obtained by contacting support@yealink.com.
Safety Instructions
Save these instructions. Read these safety instructions before use! The following basic safety precautions should always be followed to reduce risk of fire, electrical shock, and another personal injury.
General Requirements
- Before you install and use the device, read the safety instructions carefully and observe the situation during the operation.
- During the process of storage, transportation, and operation, please always keep the device dry and clean.
- During the process of storage, transportation, and operation, please avoid collision and crash of the device.
- Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center for repair.
- Without prior written consent, no organization or individual is permitted to make any change to the structure or the safety design of the device. Yealink is under no circumstance liable to consequences or legal issues caused by such changes.
- Please refer to the relevant laws and statutes while using the device. The legal rights of others should be respected as well.
Environmental Requirements
- Place the device at a well-ventilated place. Do not expose the device to direct sunlight.
- Keep the device dry and free of dust.
- Place the device on a stable and level platform.
- Please place no heavy objects on the device in case of damage and deformation caused by the heavy load.
- Keep at least 10 cm between the device and the closest object for heat dissipation.
- Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made materials.
- Keep the device away from any heat source or bare fire, such as a candle or an electric heater.
- Keep the device away from any household appliance with a strong magnetic field or electromagnetic fields, such as a microwave oven or a refrigerator.
Operating Requirements
- Do not let a child operate the device without guidance.
- Do not let a child play with the device or any accessory in case of accidental swallowing.
- Please use the accessories provided or authorized by the manufacturer only.
- The power supply of the device shall meet the requirements of the input voltage of the device. Please use the provided surge protection power socket only.
- Before plugging or unplugging any cable, make sure that your hands are completely dry.
- Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near swimming pool.
- Do not tread on, pull, or over-bend any cable in case of malfunction of the device.
- During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid a lightning strike.
- If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug.
- When there is the smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately. Contact the specified maintenance center for repair.
- Do not insert any object into equipment slots that is not part of the product or auxiliary product.
- Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables.
Cleaning Requirements
- Before cleaning the device, stop using it and disconnect it from the power supply.
- Use a piece of soft, dry, and anti-static cloth to clean the device.
- Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other perils.
ENVIRONMENTAL RECYCLING
Never dispose of the device with domestic waste
Ask your Town Council about how to dispose of it in an environmentally
friendly way. The cardboard box, plastic packaging, and player components may
be recycled in accordance with prevailing recycling regulations in your
country.
**Always adhere to prevailing regulations**
Those who fail to do so may be fined or prosecuted in accordance with the law.
The crossed-out garbage can that appears on the device means that when it has
reached the end of its useful life, it should be taken to a special waste
disposal center and treated separately from general urban waste.
Troubleshooting
The unit cannot supply power to the Yealink device.
There is a bad connection with the plug.
- Clean the plug with a dry cloth.
- Connect it to another wall outlet.
The usage environment is out of the operating temperature range.
- Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
- Connect the cable correctly.
You cannot connect the cable properly.
- You may have connected the wrong Yealink device.
- Use the correct power supply.
Some dust, etc., may be in the port.
- Clean the port.
Contact your dealer or authorized service facility for any further questions.
Contact Information
YEALINK NETWORK TECHNOLOGY CO., LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City,
Fujian, P.R.C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The
Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
About Yealink
Yealink (Stock Code: 300628) is a global brand that specializes in video
conferencing, voice communications, and collaboration solutions with best-in-
class quality, innovative technology and user-friendly experience. As one of
the best providers in more than 140 countries and regions, Yealink ranks No.1
in the global market share of SIP phone shipments (Global IP Desktop Phone
Growth Excellence Leadership Award Report, Frost & Sullivan, 2019).
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for firmware downloads,
product documents, FAQs, and more. For better service, we sincerely recommend
you to use the Yealink Ticketing system (https://ticket.yealink.com) to
submit all your technical issues.
http://www.yealink.com
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD.
Web: www.yealink.com Copyright©2021 YEALINK(XIAMEN)
NETWORK TECHNOLOGY CO., LTD.
All rights reserved.
References
- Yealink Support
- Yealink | UC & C Terminal, Video Collaboration, Conference Phone, IP Phone, Headsets & Video Conferencing
- Yealink Ticket
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>