WyreStorm HALO Series All In One Video Bar User Guide
- June 13, 2024
- WyreStorm
Table of Contents
WyreStorm HALO Series All In One Video Bar
Product Information
The HALO Series All In One Video Bar HALO VX10 v2 is a versatile video bar designed for various placement options, including mounting on a monitor, tripod, or wall. It features a tracking mod capacitive button for toggling different tracking modes, a 3.5mm audio out port, and the ability to extend the microphone pickup range using the HALO-COM-MIC add-on microphone.
Video Bar Mounting
FOR PLACEMENT ON A MONITOR
-
Angle the mount of the HALO VX10 to fit on a TV, computer or monitor at a position or angle you desire.
-
Adjust the HALO VX10 to make sure the foot on the mount is flush with the back of your device.
-
Manually adjust the HALO VX10 up/down to the best position to frame yourself.
**FOR PLACEMENT ON A TRIPOD***
-
Locate the M12 tripod thread on the bottom of the Halo VX10
-
Secure the Halo VX10 on your tripod by twisting it into the M12 thread.
-
Place your Halo VX10 with the tripod anywhere you desire to the best position to frame yourself
*Tripod not included
FOR PLACEMENT ON A WALL
-
Drill holes on the wall and insert the expansion screws provided
-
Secure the wall-mounted bracket on the wall using the screws provided.
-
Secure the HALO VX10 on the wall-mounted bracket
Connecting the Video Bar
-
Plug the HALO VX10 into an available USB port on your compute
-
Connect the DC power supply to a mains outlet.
Optional: Connect an audio output such as speakers ot hearing loop
Extending the Microphone Pickup Range
The HALO-COM-MIC add-on microphone can be used to extend the audio pickup
range of the HALO-VX10 and can be cascaded to a maximum of 3 times.
Tracking Mode Capacitive Button
Side capacitive button for toggling different tracking modes: Manual, Auto
Framing or Speaker Tracking.
SETUP SOFTWARE
The HALO VX10 has its own control software that can be used to adjust the
camera and other functions. Scan or click the QR code to the right to download
the software.
Software Device Setup
To connect the HALO VX10 to your Zoom software, first navigate to your settings pane which can be found by clicking the gear icon in the top right hand corner, then click on the Audio or Video tab. Here you can change the device by using the dropdown menus. Select WyreStorm HALO VX10 under the applicable options.
Connecting To Microsoft Teams
To connect the HALO VX10 to your Microsoft Teams software, first navigate to
your settings pane which can be found by clicking on your display image in the
top right hand corner, then click on the devices tab. Here you can change the
device by using the dropdown menus. Select WyreStorm HALO VX10 under the
applicable options.
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
- Verify that the HALO VX10 has been selected in your software’s device settings
- Verify that the device is not in standby
- Verify that power is being supplied to the device
- Verify that all connections are not loose and are functioning properly
- Try using a different USB port on your computer
- Remove any intermediate devices such as USB hubs, extension cables or switchers
In the Box
- 1x HALO VX10 Video Bar
- 1x USB-C Cable
- 1x 12V DC Power Supply (UK/US/EU/AU) 1x Wall Mount Kit
- 1x Magnetic Lens Cap
- 1x Quickstart Guide (This Document)
No Audio Input or Output
- Verify that the HALO VX10 has been selected in your software’s audio input/output settings
- Verify that the volume and microphone settings in your software are not muted
- Verify that the volume on your PC/Mac is not muted
- Verify that the microphone settings on your PC/Mac are not muted.
Warranty Information
Wyre Storm Technologies ProAV Corporation warrants that its products to be free from defects in material and workmanship under normal use for a period of two (2) years from the date of purchase. Refer to the Product Warranty page on wyrestorm.com for more details on our limited product warranty.
Copyright © 2023 WyreStorm Technologies | wyrestorm.com HALO VX10 V2 Quickstart Guide | 230217
INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973) support@wyrestorm.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>