American Products AMW-242410-AF AP UTILITY Wall Mount Enclosure Owner’s Manual
- June 13, 2024
- AMERICAN PRODUCTS
Table of Contents
Turn-Key Enclosure Solutions
AP UTILITY™
Wall Mount Enclosure
Owner’s Manual
Form 36-0061-06
Ver. 04/27/2022
597 Evergreen Road
Strafford MO 65757
417-736-2135
Toll Free: 855-736-2135
Web: www.amprod.us
Contacting Us
American Products can be contacted for any issues that arise with the supplied product.
Technical assistance is available 9am to 4pm central standard time.
- Toll Free: 855-736-2135
- Phone: 417-736-2135
- Fax: 417-736-9535
- Email: Sales@amprod.us
- Web: www.amprod.us
When calling, please have available, or if faxing or emailing, be sure to provide:
- Part Number
- Serial Number
- Date of Purchase
- Date of Installation
Safety First
This publication provides a description of the American Products AP UTILITY™
Enclosure.
The mechanical descriptions, typical applications, installation instructions,
safety guidelines, grounding and bonding are included.
Four types of messages may appear throughout this manual, identified by the
following icons and signal words:
Read equipment manufacturer’s manual and this material before using this product. Failure to do so can result in serious injury or death.
DANGER| Indicates a hazardous situation that, if not avoided, will
result in death or serious injury. This signal word is to be limited to the
most extreme situations.
---|---
WARNING| Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
CAUTION| Indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury.
NOTICE:| Indicates information considered important, but not hazard-
related (e.g. messages relating to property damage). The safety alert symbol
shall not be used with this signal word. When a signal word is used for
messages relating to property damage, NOTICE is the choice of signal word.
Important Labeling Information
AP UTILITY™ Wall Mount Enclosure for Type 4 Enclosures with Optional
Ventilation & Filter Pockets are Type 3R Powder Coating Tested to Standards:
Telcordia GR487 for Telecommunications Enclosures
Product Overview
- The cabinet is constructed of Aluminum or Galvanized Steel with GR487 Compliant powder coat painted finish for reduced weight and superior corrosion resistance. The front door is equipped with three point pad-lockable door latches. The top of the cabinet has a double wall construction to reduce the effects of solar radiation and for structural integrity.
- The cabinet utilizes stainless steel hardware, UL recognized EPDM edge gasketing (temp range of – 40F to +212 F.
- When installing cabling or equipment that enters the cabinet, Type 4 entrances, fittings or equipment is to be used to maintain the integrity of the enclosure
- The cabinet is designed to allow various accessories to be mounted on the enclosure to meet customer requirements. For part number structure for parent enclosure and accessories see diagram below:
Product Specifications
Installation
The AP UTILITY™ cabinet should be mounted on sturdy surface. See the figure
for mounting kit assembly.
WARNING
During cabinet mounting, fixture the cabinet securely to avoid personal injury
or cabinet damage.
The AP UTILITY™ cabinet should be mounted on sturdy surface. See the figure
for mounting kit assembly.
WARNING
During cabinet mounting, fixture the cabinet securely to avoid personal injury
or cabinet damage.
Clearance Requirements
When selecting a location to mount the cabinet, ensure that proper clearance is available to allow the cabinet door to open fully.
Grounding Information
Bonding and grounding should be done in accordance with industry standard procedures and comply with local electrical codes. The main cabinet ground bar is located in the front of the cabinet as shown below.
Quarter Turn 3-Point Locking Door Latches
The cabinet doors are equipped with quarter-turn 3-point padlock-able door
latches. The latches are secured by turning the handle a quarter turn
clockwise until the stop is reached. Convenient security padlock hole to allow
for a standard padlock to be installed. With a padlock on the latch, access
door cannot be opened protecting the cabinet from undesired intrusion.
Appendix A
Technical Support
American Products can be contacted for any issues that arise with the supplied
product.
Technical assistance is available 9am to 4pm central standard time.
- Toll Free: 855-736-2135
- Phone: 417-736-2135
- Fax: 417-736-9535
- Email: Sales@amprod.us
- Web: www.amprod.us
When calling, please have available, or if faxing or emailing, be sure to provide:
- Part Number
- Serial Number
- Date of Purchase
- Date of Installation
Warranty Policy
Enclosures designed and manufactured by American Products shall be warranted
to be free of defects in material or workmanship for a period of 5 years (U.S.
& Canada) and 3 years for International deployments from the date of shipment.
Should the product be proven to be defective, American Products will have the
option to repair or replace the product. Items included with the enclosures,
not manufactured by American Products, will carry the original manufacturer’s
warranty.
It is the responsibility of the buyer to communicate any special environmental
concerns in which the enclosures will be utilized. Special materials may be
required to allow for proper corrosion resistance for harsh environments. The
warranty does not cover enclosures used in applications and environments for
which they were not designed. Warranty does not cover abuse, modifications by
others or reimbursement for unauthorized rework. At no time will American
Products reimburse purchaser for unauthorized rework on any product.
Under no circumstances is American Products liable for any consequential
damages, liquidated damages, loss in profits or revenues, costs of capital,
downtime costs or damages related to our product performance.
Warranty Claims
Enclosures found to be defective will be repaired or replaced with the same or
comparable product.
All warranty claims must be communicated to our customer service
855-736-2135 department to obtain an
RMA number. For warranty claims in the USA and Canada, freight will be managed
and paid by American Products. For warranty claims outside of the USA and
Canada, the customer will be responsible for managing the freight and freight
expenses. Products being returned from other than US or Canada are to be
returned to the factory in Strafford, MO to receive warranty resolution, once
approved with an RMA.
Except for the express warranty stated above, American Products makes no other
warranties with respect to the product, expressed or implied, including but
not limited to merchantability or fitness for a particular purpose.
597 Evergreen Road Straff ord, Missouri 65757
Phone: 417-736-2135 Toll Free:
855-736-2135
www.amprod.us