tp-link P110 Mini Smart Wi-Fi Plug User Guide

tp-link P110 Mini Smart Wi-Fi Plug

Product Information

Specifications

• Common Load Types
  • LED lamps: 100W
  • Heater: 3680W
  • Toaster: 3680W
  • Incandescent: 600W
  • Iron: 3680W
  • Tower Fan: 120W

Product Usage Instructions

Quick Start Guide

1. Get the Tapo app from the App Store or Google Play.
2. Tap the button in the app and select your model (Bluetooth Setup).
3. Follow the instructions in the Tapo app to complete setup.

Third-Party Services
Tapo works with Alexa, Google Assistant, and other third-party services to control your smart plug by voice. To set up Third-Party Services:

1. Open the Tapo app.
2. Go to “Me > Third-Party Services”.
3. Follow the on-screen instructions to set up the desired third-party services.

LED Status
The LED on the smart plug indicates different statuses:

Reset
To reset the smart plug

• Press and hold the power button on the plug for about 5 seconds
  to reset the Wi-Fi while keeping other settings.

• Press and hold the power button on the plug for about 10
  seconds to restore your plug to factory default settings.

FAQ

1. Q: How do I set up Third-Party Services?
   A: To set up Third-Party Services, open the Tapo app and go to “Me > Third- Party Services”. Follow the on-screen instructions to set up the desired third-party services.

2. Q: How can I reset the smart plug?
   A: To reset the smart plug, press and hold the power button on the plug for about 5 seconds to reset the Wi-Fi while keeping other settings. Press and hold the power button on the plug for about 10 seconds to restore your plug to factory default settings.

Safety Information

•  Keep the device away from water, fire, humidity or hot environments.
• For indoor use only.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• The devices are not intended for use in locations where the temperature may be less than actual room conditions, such as unheated warehouses or garages.
• Electrical switch integrated in this product is only intended for functional purposes. Unplug the appliance before servicing.
• Do not overload power outlets. This can result in the risk of fire or electric shock.
• Devices of the same or another type not be stacked in normal use.
• Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device.
• Please use this product with care and operate at your own risk.
• ? Need some help?
  • Visit https://www.tapo.com/support/for technical support, user guides, FAQs, warranty & more

Quick Start Guide

1. Get the Tapo app from the  App Store or Google Play.
2. Tap the  button in the app and select your model (Bluetooth Setup). Follow the instructions in the Tapo app to complete setup.

Third-Party Services

• Tapo works with Alexa, Google Assistant, and other third-party services to control your smart plug by voice. You can go to Me > Third-Party Services in the Tapo app to set up Third-Party Services.

LED Status

Reset

• Press and hold the power button on the plug for about 5s to reset the Wi-Fi while keeping other settings.
• Press and hold the power button on the plug for about 10s to restore your plug to factory default settings.

Specifications

• Voltage: 220-230V~ 50/60Hz
• Max Load: 16A General Use & Resistive, 1/6 HP Motor
• Operating Temperature: 0 ºC – 40 ºC
• Operating Humidity: 10% – 90%RH, Non-condensing
• Socket-outlet: Combined socket-outlets of IS 1293:2019. Suitable for two-pin and three-pin plugs in Annex B of IS 1293:2019.

Common Load Types

• LED lamps: 100W
• Heater: 3680W
• Toaster: 3680W
• Incandescent: 600W
• Iron: 3680W
• Tower Fan: 120W

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>