PROAIM P-STRG-CF Carbon Fiber Star Ring for Handheld Gimbal Camera Stabilizers Instruction Manual

: June 17, 2024
: PROAIM

Table of Contents

PROAIM P-STRG-CF Carbon Fiber Star Ring for Handheld Gimbal Camera
What’s In The Box
All rights reserved.
FUNCTION
CF Carbon Fiber Star Ring Setup
Spool Clamps Assembly Inside
Quick Release Adapter Assembly Inside
YOUR PROAIM CF CARBON FIBER STAR RING FOR HANDHELD GIMBAL CAMERA
(SHOWN WITH OPTIONAL ACCESSORIES)
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PROAIM P-STRG-CF Carbon Fiber Star Ring for Handheld Gimbal Camera

Stabilizers Instruction Manual

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

All rights reserved.

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo- copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.

FUNCTION

CF Carbon Fiber Star Ring Setup

Attach the top CF & bottom CF Star Ring.

NOTE: The portable and travel-friendly design can be detached into two pieces to ensure comfortable carriage to different shooting locations.

After attaching the Star Ring, tighten the allen bolts it using the 2.5mm Allen key, as shown in the image
The Star Ring has sturdy spool clamps that easily attach to most body support rigs.
Features: The Spool clamp can be positioned at the same place where they were the last time you were shooting using the index markings.
Remove the attached Foot clamp on the TopCF Star ring by loosening it.
Repeat the same process with the other two foot clamps.
All three foot clamps have been removed, as shown in the image.
Attach the foot clamps with the bottom CF Star Ring.
After attaching the foot clamps, tighten them using the provided knobs.

Feature: It incorporates foot clamps that keep the setup upright without a stand, providing a broad base that does not fall forward or backward as shown in the picture

Spool Clamps Assembly Inside

Loosen and remove the bolts using the Allenkey.

Feature: The octagonal ring features indexmarking to enable the operator to efficientlyaffix the clamps and quick-release adapterwhere they were the last time they were shooting.

Detach the spool clamp from the Star Ring.
Change the spool clamp’s direction by attaching the clamp’s outer portion to the inside, as shown in the image.
After attaching the spool clamp, insert Allenbolts in it.
Repeat the same process with the second spool clamp.
Now, the direction of the spool clamps is on the outside, as shown in the image.
Feature: Its robust spool clamps effortlessly attach to most body support rigs, such as Proaim Hawk Body Support, Hawk Lite Body
Support, Gimbal Bird Body Support, and Flycam Flowline Camera Gimbal Tilt Control Kit.

Quick Release Adapter Assembly Inside

To straighten the quick-release adapter on the Top CF Star Ring, loosen all its bolts using the Allen key.
Detach the quick-release adapter as shown
Attach the quick-release plate from the bottom side of the Top CF Star Ring.
Attach the quick-release adapter.
After attaching, re-insert the bolts in the adapter and tighten them using the Allen key.
Loosen the knob of the quick-release adapter and remove it.
Insert the bolt in the quick-release plate.

NOTE: It can be used in both underslung and over-slung mode using quick- release adapters with M3 and M4 threads, to which the MOVI quick-release plate and R2 quick-release plate can be mounted, respectively.

After inserting the bolt, attach the plate with the QR Movi (Not Included).
After the attachment, secure the quick-release plate using the Allen key.
Attach the QR Movi with the gimbal (Not Included) and press the locking lever by pressing the lever.
To attach the gimbal (Not Included), slide the quick-release plate onto the Star Ring and tighten the knob to secure the setup.
Slide the Camera (Not Included) onto the quick-release plate of the gimbal.
NOTE: Unlock unmatched stability and control over your 2-axis and 3-axis gimbals with the Handheld CF Star Ring,
After mounting the Camera (Not Included), press the locking lever from the bottom side to secure the Camera.
The Star Ring offers enhanced support and flexibility, allowing gimbal operators to achieve more stable control over their camera gimbals to achieve professional-quality shots consistently.

YOUR PROAIM CF CARBON FIBER STAR RING FOR HANDHELD GIMBAL CAMERA

STABILIZERS & BODY SUPPORT RIGS ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us. Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.