Taylor Pneumatic Tool Company T-7799L Super Duty Hi Torque Impact Wrench Instruction Manual

T-7799L Super Duty Hi Torque Impact Wrench

Product Information

The T-7799L,L-6 1 Super Duty Hi Torque Impact Wrench is a powerful air-powered tool that can be used for heavy-duty applications. It is equipped with multiple internal parts including
a pin trigger, regulator valve, throttle valve, reverse valve, and anvil. The wrench has a maximum operating pressure of 90 PSI and comes with 71 different parts for maintenance and repair.

Product Usage Instructions

1. Before using the wrench, oil it with a few drops of air tool oil through the air inlet. Run it for one second to coat all internal parts.
2. Connect the wrench to an air compressor with a maximum pressure of 90 PSI.
3. Select the appropriate socket size for the job and attach it to the anvil.
4. Hold the wrench securely with both hands and pull the trigger to start it.
5. Position the socket over the nut or bolt to be tightened or loosened.
6. Apply pressure to the wrench and allow it to do the work.
7. Release the trigger once the nut or bolt is tightened or loosened to the desired level.
8. After use, disconnect the wrench from the air compressor and remove the socket from the anvil.
9. Clean and store the wrench in a dry place until its next use.

T-7799L,L-6 1” Super Duty Hi Torque Impact Wrench

OILING INSTRUCTIONS:
OIL AFTER EACH USE WITH A FEW DROPS OF AIR TOOL OIL THROUGH THE AIR INLET. RUN FOR ONE SECOND TO COAT
ALL INTERNAL PARTS

USE 90 PSI MAXIMUM

Ref #

1

2

3

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

| Part #

7799L01

7799L02

7799L03

7799L03B

7799L04

7799L05

7799L06

7799L07

7799L08

7799L09

7799L10

7799L11

7799L12

7799L13

7799L14

7799L15

7799L16

7799L17

7799L18

7799L19

7799L20

7799L21

7799L22

7799L23

7799L24

7799L25

7799L26

7799L27

7799L28

7799L29

7799L30

7799L31

7799L32

7799L33

7799L34

7799L35

| Description

Handle includes (#1-#33)

Pin

Trigger (Inside)

Trigger (Outside) OPTIONAL

Spring Pin O-ring

Air inlet Cap Screw

Regulator Bushing O-ring

Regulator O-ring

Regulator Valve Gasket Washer

Snap Ring Snap Ring Bushing Valve Stem Throttle valve Spring

O-ring Plug O-ring Screw Spring Ball

Reverse Valve Bushing Reverse Valve

O-ring Snap Ring

Reverse Lever Screw Regulator Knob Spring Pin Spring Washer Cap Screw

| Qty.

1

1

1

1

1

1

1

4

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

12

4

---|---|---|---
Ref #

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

56B

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

| Part #

7799L36

7799L37

7799L38`

7799L39

7799L40

7799L41

7799L42

7799L43

7799L44

7799L45

7799L46

7799L47

7799L48

7799L49

7799L50

7799L51

7799L52

7799L53

7799L54

7799L55

7799L56

7799L56B

7799L57

7799L58

7799L59

7799L60

7799L61

7799L62

7799L63

7799L64

7799L65

7799L66

7799L67

7799L68

7799L69

7799L70

7799L71

| Description

Rear Gasket

Bearing End plate Spring Pin Cylinder Spring Pin Rotor

Rotor Blade (set of 6) Bearing

Motor Housing Spring

Ball Lock Nut

Threaded Insert Bearing

Front Gasket Rear Washer Hammer Cage Hammer Hammer Pin Anvil

Extended Anvil 9” (not shown) Anvil Bushing

Rubber Bumper Hammer Case Front Bumper Oil Seal

Cap Screw Spring Washer Cap Screw

D Handle Set Screw Gasket Spring Pin

Front End Plate

Anvil Collar

O-Ring

| Qty.

1

1

1

1

2

1

1 set

1

1

1

1

4

4

1

1

1

1

2

2

1

1

1

1

1

1

1

4

4

4

1

1

1

1

1

1

1

---|---|---|---

General Instructions Impact Wrenches

PLEASE READ AND FOLLOW ALL WARNINGS
An impact wrench is an amazing time saving machine. If its strengths and weaknesses are taken into consideration it can be used for years of trouble free service. Always use 90 PSI Maximum AT THE TOOL. Using higher air pressures can prematurely wear parts and strain parts not designed for the higher pressure. In most instances, within the first five seconds of use, an impact wrench develops its maximum torque. If a fastener is still not moving try penetrating oil or a larger impact wrench. Always use impact sockets. Always oil your ail tools before storing. Put a few spoonful’s of airtool oil in the air inlet and run the tool for a second or two to coat internal parts

OILING INSTRUCTIONS:
OIL AFTER EACH USE WITH 2 OR 3 TABLESPOONS OF AIRTOOL OIL THROUGH THE AIR INLET RUN FOR ONE SECOND TO COAT ALL INTERNAL PARTS. 1/4″ TO 1/2″ IMPACTS USAULY USE 30 WT NON DETERGENT OIL IN THE HAMMER CASE. WRENCHES 34″ TO 1-1/2″ USUALLY USE GREASE IN THE HAMMER CASE.

IMPACT WRENCHES – GENERAL INSTRUCTIONS

1. ALWAYS DISCONNECT THE TOOL FROM AIR SOURCE WHEN CHANGING ACCESSORIES OR SERVICING THE TOOL.
2. CHECK ALL FASTENERS DAILY BOLTS MUST BE KEPT TIGHT TO MAINTAIN SAFETYAND TOP TOOL OPERATING VPERFOR- MANCE.
3. STAY IN CONTROL OF THE IMPACT WRENCH
4. ALWAY USE IMPACT SOCKETS – STANDARD SOCKETS MAY BE BRITTLE AND BREAK CAUSING DAMAGE TO THE OPERATOR OR THE TOOL.
5. VIBRATION MAY BE HARMFUL TO YOUR ARMS AND HANDS. WEAR PROTECTION.
6. INSPECT THE TOOL AND AIR SUPPLY AND AIR HOSE ON A REGULAR BASIS.
7. DO NOT MAKE CONTACT WITH ELECTRICAL LINES.
8. LEAVE TRIGGER OFF BEFORE CONNECTING THE TOOL TQ THEAR SUPPLY. AVOID ACCIDENTAL STARTS.
9. WEAR THE PROPER CLOTHING. DO NOT WEAR JEWELRY, LOOSE CLOTHING, OR LONG HAIR AS IT CAN GET CAUGHT IN RO- TATING PARTS. KEEP GLOVES AWAY FROM ROTATING PARTS.
10. DO NOT WORK IN HAZARDOUS ATMOSPHERES WHERE SPARKS COULD IGNITE OR DETONATE FUMES.
11. WATCH WHAT YOU ARE DOING. USE COMMON SENSE WHEN OPERATING PNEUMATIC TOOLS DO NOT USE PNEUMATIC TOOLS WHEN TIRED OR UNDER THE INFLUENCE OF MEDICATION, ALCOHOL OR DRUGS. SERIOUS PERSONAL INJURY MAY RE- SULT FROM A MOMENTS INATTENTION.
12. USE 90 PSI AT THE TOOL. USE 3/8″, 1/2″ or 3/4″ HOSE OR LARGER WITH FITTINGS 9/32 MINIMUM LD. AS SPECIFIED
13. DO NOT WORK IN HAZARDOUS ATMOSPHERES WHERE SPARKS COULD IGNITE OR DETONATE FUMES.
14. WATCH WHAT YOU ARE DOING. USE COMMON SENSE WHEN OPERATING PNEUMATIC TOOLS. DO NOT USE PNEUMATIC TOOLS WHEN TIRED OR UNDER THE INFLUENCE OF MEDICATION, ALCOHOL OR DRUGS SERIOUS PERSONAL INJURY MAY RE- SULT FROM A MOMENTS INATTENTION.
15. USE 90 PSI AT THE TOOL. USE 3/8″, 1/2″ or 3/4″ HOSE OR LARGER WITH FITTINGS 9/32 MINIMUM I.D. AS SPECIFIED
16. ONLY USE CLEAN DRY COMPRESSED AIR. NEVER USE OXYGEN, CARBON DIOXIDE, COMBUSTIBLE GASES OR ANY OTHER BOTTLED GAS TO POWER THIS TOOL.
17. STORE TOOLS IN A CLEAN DRY ENVIRONMENT
18. DO NOT USE DAMAGED TOOLS – MARK, AND RETURN DAMAGED TOOLS FOR SERVICE.
19. NEVER FORCE THE TOOL. LET THE TOOL DO THE WORK.
20. STOP USE IMMEDIATELY IF TOOL IS MAKING AN UNUSUAL NOISE OR VIBRATION. HAVE TOOL CHECKED BY PROFESSIONAL TECHNICIAN.
21. KEEP CHILDREN, PETS AND BYSTANDERS AWAY WHILE OPERATING A PNEUMATIC TOOL. DISTRACTIONS CAN CAUSE YOU TO LOSE CONTROL.
22. THESE WARNINGS AND INSTRUCTIONS CAN NOT COVER ALL POSSIBLE CONDITIONS OR SITUATIONS. THE OPERATOR MUST UNDERSTAND THAT COMMON SENSE AND CAUTIONS ARE FACTORS WHICH CAN NOT BE BUILT INTO THE PRODUCT BUT MUST BE SUPPLIED BY THE OPERATOR.

ADDITIONAL INFORMATION IS AVAILABLE FROM:
AMERICAN NATIONAL STANDARDS INSTITUTE
11 WEST 42ND ST.
NEW YORK, NY 10036

REQUEST A COPY OF ANSI 8186.1 SAFETY CODE FOR PORTABLE AIR TOOLS.

LIMITED LIFETIME WARRANTY
products of Taylor Pneumatic are warranted to be free from defects in material and workmanship for the life of the tool. This warranty applies to the original purchaser only. This warranty does not cover tools that have been abused, misused, modified, not properly lubricated or to normal wear and tear Taylor Pneumatic Will at its option repair or replace the defective product free of charge except for shipping. Taylor Pneumatics sole liability and your exclusive remedy under this warranty is limited to the repair or replacement of the defective product. There are no other warranties expressed or implied and Taylor Pneumatic shall not be liable for incidental, consequential, or special damages, expenses or costs excepts described above. WARRANTY VOID IF TOOL IS DISASSEMBLED. Returm tools to Taylor Pneumatic. Be sure to include your name, address, proof of purchase and description of the suspected defect.

This warranty applies to the basic tool. It does not apply to wear and tear on accessories or consumables such as drill chucks, backing pads for sanders, punch and dies for nibblers, spray gun cups or accessories from a kit.

Address: 505 N. Railroad Ave. 33435 P.O. Box 1117 33424 Boynton Beach, Florida
FOR WARRANTY INFORMATION & WARRANTY REGISTRATION VISIT: www.taylorpneumatic.com
1022TPTC /all rights reserved /COPYRIGHT 2022 / final
Ph. 561-732-1111
Fax 561-731-4412
Toll Free 800-805-8665

References

• TaylorPneumatic.com – Taylor Pneumatic Tool Company

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>