AMERICAN PRODUCTS AM-462220-MTR Indoor Enclosure Owner’s Manual
- June 13, 2024
- AMERICAN PRODUCTS
Table of Contents
AMERICAN PRODUCTS AM-462220-MTR Indoor Enclosure Owner's Manual
THIS PAGE INTENTIONALLY LEFT BLANK
Contacting Us
American Products can be contacted for any issues that arise with the supplied
product.
Technical assistance is available 9am to 4pm central standard time.
- Toll Free: 855-736-2135
- Phone: 417-736-2135
- Fax: 417-736-9535
- Email: Sales@amprod.us
- Web: www.amprod.us
When calling, please have available, or if faxing or emailing, be sure to provide:
Safety First
This publication provides a description of the American Products AP MINUTEMAN™
Enclosure.
The mechanical descriptions, typical applications, installation instructions,
safety guidelines, grounding and bonding are included.
Four types of messages may appear throughout this manual, identified by the
following icons and signal words:
Product Overview
- The AP MINUTEMAN™ cabinet is constructed of 12GA, 18GA and 20GA Galvanized Steel with GR487 Compliant powder coat painted finish for reduced weight and superior corrosion resistance. The front and rear doors are equipped with a keyed 1/4 turn pawl mechanism for added security. The top of the cabinet has a double wall construction to reduce the effects of solar radiation and for structural integrity.
- AP MINUTEMAN™ has a 600lb static distributed weight load capacity. A 2nd set of rack rails (optional purchase) is recommended to evenly distribute the weight of your equipment.
- The Cabinet is designed to allow various accessories to be mounted in the enclosure to meet customer requirements. For part number structure for Parent enclosure and accessories see diagram below:
PART NUMBERING EXAMPLE
THIS PAGE INTENTIONALLY LEFT BLANK
Installation
The AP MINUTEMAN™ cabinet should be mounted on sturdy surface. See the figure below for wall mounting hole patterns.
The AP MINUTEMAN™ cabinet should be mounted on sturdy surface. See the figure below for wall mounting hole patterns.
THIS PAGE INTENTIONALLY LEFT BLANK
Appendix A
Technical Support
American Products can be contacted for any issues that arise with the supplied
product.
Technical assistance is available 9am to 4pm central standard time.
- Toll Free: 855-736-2135
- Phone: 417-736-2135
- Fax: 417-736-9535
- Email: Sales@amprod.us
- Web: www.amprod.us
When calling, please have available, or if faxing or emailing, be sure to provide:
Warranty Policy
Enclosures designed and manufactured by American Products shall be warranted to be free of defects in material or workmanship for a period of 5 years (U.S. & Canada) and 3 years for International deployments from the date of shipment. Should the product be proven to be defective, American Products will have the option to repair or replace the product. Items included with the enclosures, not manufactured by American Products, will carry the original manufacturer’s warranty.
It is the responsibility of the buyer to communicate any special environmental concerns in which the enclosures will be utilized. Special materials may be required to allow for proper corrosion resistance for harsh environments. The warranty does not cover enclosures used in applications and environments for which they were not designed. Warranty does not cover abuse, modifications by others or reimbursement for unauthorized rework. At no time will American Products reimburse purchaser for unauthorized rework on any product.
Under no circumstances is American Products liable for any consequential damages, liquidated damages, loss in profits or revenues, costs of capital, downtime costs or damages related to our product performance.
Warranty Claims
Enclosures found to be defective will be repaired or replaced with the same or comparable product. All warranty claims must be communicated to our customer service 855-736-2135 department to obtain an RMA number. For warranty claims in the USA and Canada, freight will be managed and paid by American Products. For warranty claims outside of the USA and Canada, the customer will be responsible for managing the freight and freight expenses. Products being returned from other than US or Canada are to be returned to the factory in Strafford, MO to receive warranty resolution, once approved with an RMA.
Except for the express warranty stated above, American Products makes no other warranties with respect to the product, expressed or implied, including but not limited to merchantability or fitness for a particular purpose.
597 Evergreen Road Straff ord, Missouri 65757
Phone: 417-736-2135 Toll Free:
855-736-2135
www.amprod.us
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>