MEAN WELL HLG-80H-12 Constant Voltage Constant Current LED Driver User Manual

MEAN WELL HLG-80H-12 Constant Voltage Constant Current LED Driver

Features

• Constant Voltage + Constant Current mode output
• Metal housing with class I design
• Built-in active PFC function
• Class 2 power unit
• IP67 / IP65 rating for indoor or outdoor installations
• Function options: output adjustable via potentiometer; 3 in 1 dimming; Timer dimming
• Typical lifetime > 62000 hours
• 7 years warranty

Applications

• LED street lighting
• LED high-bay lighting
• Parking space lighting
• LED fishing lamp
• LED greenhouse lighting
• Type “HL” for use in Class I, Division 2 hazardous (Classified) location.

GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

HLG-80H series is a 80W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-80H operates from 90 ~ 305VAC and offers models with different rated voltage rangingbetween 12V and 54V. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40°C ~ +80°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-80H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Model Encoding

SPECIFICATION

MODEL| HLG-80H-12| HLG-80H-15| HLG-80H-20| HLG- 80H-24| HLG-80H-30| HLG-80H-36| HLG-80H-42| HLG-80H-48| HLG-80H-54
---|---|---|---|---|---|---|---|---|---

OUTPUT

| DC VOLTAGE| 12V| 15V| 20V| 24V| 30V| 36V| 42V| 48V| 54V
CONSTANT CURRENT REGION Note.4| 7.2 ~12V| 9 ~ 15V| 12 ~ 20V| 14.4 ~ 24V| 18 ~ 30V| 21.6 ~ 36V| 25.2 ~ 42V| 28.8 ~ 48V| 32.4 ~ 54V
RATED CURRENT| 5A| 5A| 4A| 3.4A| 2.7A| 2.3A| 1.95A| 1.7A| 1.5A
RATED POWER| 60W| 75W| 80W| 81.6W| 81W| 82.8W| 81.9W| 81.6W| 81W
RIPPLE & NOISE (max.) **Note.2| 150mVp-p| 150mVp-p| 150mVp-p| 150mVp-p| 200mVp-p| 200mVp-p| 200mVp-p| 200mVp-p| 200mVp-p
VOLTAGE ADJ. RANGE| Adjustable for A-Type only (via built-in potentiometer)
10.8 ~ 13.5V| 13.5 ~ 17V| 17 ~ 22V| 22 ~ 27V| 27 ~ 33V| 33 ~ 40V| 38 ~ 46V| 43 ~ 53V| 49 ~ 58V
CURRENT ADJ. RANGE| Adjustable for A/AB-Type only (via built-in potentiometer)
3 ~ 5A| 3 ~ 5A| 2.4 ~ 4A| 2.04 ~ 3.4A| 1.62 ~ 2.7A| 1.38 ~ 2.3A| 1.17 ~ 1.95A| 1.02 ~ 1.7A| 0.9 ~ 1.5A
VOLTAGE TOLERANCE Note.3| ±2.5%| ±2.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%
LINE REGULATION| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LOAD REGULATION| ±2.0%| ±1.5%| ±1.0%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
SETUP, RISE TIME Note.6| 1200ms,200ms/115VAC  500ms,200ms/230VAC
HOLD UP TIME (Typ.)**| 16ms at full load| 230VAC /115VAC|  |  |  |  |

INPUT

| VOLTAGE RANGE Note.5| 90 ~ 305VAC         127 ~ 431VDC

(Please refer to “STATIC CHARACTERISTIC” section)

FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF≧0.96/115VAC, PF≧0.96/230VAC, PF≧0.94/277VAC @ full load

(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)

TOTAL HARMONIC DISTORTION| THD< 20% (@ load≧60% / 115VAC,230VAC; @ load≧75% / 277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)

EFFICIENCY (Typ.)| 88%| 89%| 90%| 90.5%| 91%| 91%| 91%| 91%| 91%
AC CURRENT (Typ.)| 0.85A / 115VAC| 0.425A / 230VAC| 0.4A / 277VAC|  |  | |
INRUSH CURRENT (Typ.)| COLD START 70A(twidth=485μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA / 277VAC

PROTECTION

| OVER CURRENT| 95 ~ 108%
Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT| Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE| 14 ~ 17V| 18 ~ 24V| 23 ~ 30V| 28 ~ 35V| 35 ~ 43V| 41 ~ 49V| 48 ~ 58V| 54 ~ 63V| 59 ~ 68V
Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| Shut down o/p voltage, re-power on to recover

ENVIRONMENT

| WORKING TEMP.| Tcase= -40 ~ +80℃ (Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase= +80℃
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 60℃)
VIBRATION| 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

| ****

SAFETY STANDARDS Note.8

| UL8750(type”HL”), CSA C22.2 No. 250.0-08, UL8750 LISTED for HLG-80H-  BL;BS EN/EN/AS/NZS 61347-1,BS EN/EN/AS/NZS 61347-2-13 J61347-1, J61347-2-13(except for B,AB and D-type), GB19510.1,independent, GB19510.14,EAC TP TC 004,BIS IS15885(for 36A,

54A only), IP65 or IP67,KC61347-1,KC61347-2-13(except for AB,BL-type) approved

WITHSTAND VOLTAGE| I/P-O/P:3.75KVAC  I/P-FG:2KVAC  O/P-FG:1.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION Note.8| Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧60%); BS EN/EN61000-3-3,GB17743 and GB17625.1, EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020

OTHERS

| MTBF| 2992.9K hrs min.      Telcordia SR-332 (Bellcore) ; 289.1K hrs min.      MIL-HDBK-217F (25℃)
DIMENSION| 195.661.538.8mm (LWH)
PACKING| 0.84Kg; 16pcs/14.4Kg/0.54CUFT
NOTE|

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Please refer to “DRIVING METHODS OF LED MODULE”.
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. The driver is considered as a component that will be operated in combination with final equipment. Since MC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify MC Directive on the complete installation again.
8. To fulfill requirements of the latest Er regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.
9. This series meets the typical life expectancy of >62,000 hours of operation when case, particularly tc point (or TMP, per DLC), is about 75°C or less.
10. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
11. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft)
12. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf

※ Product Liability Disclaimer：For detailed information, please refer to https://[www.meanwell.com/serviceDisclaimer.aspx](http://www.meanwell.com/serviceDisclaimer.aspx) File Name:HLG-80H-SPEC  2022-02-18

Documents / Resources

| MEAN WELL HLG-80H-12 Constant Voltage Constant Current LED Driver [pdf] User Manual
HLG-80H-12 Constant Voltage Constant Current LED Driver, HLG-80H-12, Constant Voltage Constant Current LED Driver, Voltage Constant Current LED Driver, Constant Current LED Driver, Current LED Driver, LED Driver
---|---
| MEAN WELL HLG-80H-12 Constant Voltage Constant Current LED Driver [pdf] Owner's Manual
HLG-80H-12, HLG-80H-15, HLG-80H-20, HLG-80H-24, HLG-80H-30, HLG-80H-36, HLG- 80H-42, HLG-80H-48, HLG-80H-54, HLG-80H-12 Constant Voltage Constant Current LED Driver, HLG-80H-12, Constant Voltage Constant Current LED Driver, Constant Current LED Driver, LED Driver, Driver

References

• TÜV Rheinland - Home | US | TÜV Rheinland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>