Hotpoint AH12H12E3B Electric Heater Heat Pump User Guide
- May 15, 2024
- Hotpoint
Table of Contents
AH12H12E3B
Hotpoint ® PTAC Heat Pump Unit with
Electric Heat Backup 20 amps, 265 Volt
FEATURE AND BENEFITS
- 12,000 cooling BTU
- 10.5 EER
- 10,800 heating BTU
- 3.2 COP
- R32 Refrigerant – Environmental friendly, low GWP (Global Warming Potential)
- 3-Speed Fan – Give guests control over their comfort with three fan speeds to choose from
- 4-Temperature Limiting Options – Easily select one of four temperature ranges for peak efficiency and total customer comfort
- Intuitive Display – Allow guests to easily customize their preferred settings and reduce maintenance calls with an easy-to-use control panel
- Power Cord (LCDI) Included – Hotpoint PTACs come with an attached cord for a quick and easy installation
- Automatic Emergency Heat – Keep guests comfortable with a heating option that uses electric resistance heat in heat pump mode
- Freeze and Frost Protection – Automatic freeze and indoor frost control keep units operating in peak condition
- Auto Power Recovery – In case of power failures, units automatically resume their operation when power restores, reducing maintenance calls
- Self Diagnostics – Quickly and easily identify service needs with a nine-point diagnostic code system
- Backed by an Industry Leader – With a long history of creating durable products at an affordable price, Hotpoint is your trusted PTAC brand
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
ELECTRICAL WIRING
- All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations.
NOTE : Aluminum wiring may pose special problems – consult a qualified electrician.
GRILLE OPTIONS
- Stamped Aluminum Grille – RAG70
ELECTRICAL CONNECTION
-
265V Hotpoint PTACs require the use of a subbase (sold separately).
Installation must comply with local electrical codes and regulations. -
Power cord is permanently attached on all Hotpoint chassis.
WALL CASE DIMENSIONS
RAB80 WALL SLEEVE
Heavy-gauge galvanized steel, with insulation, for quick self-assembly.
A – 42”, B – 13-3/4”, C – 16”
MAXIMUM CORD EXTENSION
WALL OPENING DIMENSIONS
Add 1/4” to A and C dimensions for all cut-outs.
RAB80 16-1/4” Min. H x 42-1/4” Min. W
PRELIMINARY SPECIFICATIONS
SUBJECT TO CHANGE
31-5000821 Rev. 0 07-23 GEA
Documents / Resources
|
Hotpoint AH12H12E3B Electric Heater Heat
Pump
[pdf] User Guide
AH12H12E3B Electric Heater Heat Pump, AH12H12E3B, Electric Heater Heat Pump,
Heater Heat Pump, Heat Pump, Pump
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>