EENOUR CH2240 Hat Press Machine User Manual
- June 13, 2024
- EENOUR
Table of Contents
EENOUR CH2240 Hat Press Machine User Manual
Introduction
Thank you for purchasing the EENOUR Portable Hat Press. Before use, please read the user manual of this product to ensure correct use after a complete understanding. After reading, please keep the user manual in a safe place for future reference. If you need any assistance, please contact our support team at: support@eenour.com with your product model number and Amazon order number.
Safety Instructions
- Don’t touch the curved heat plate as the machine is heating or still hot.
- Be careful of hat pressing form or pressing base getting very hot during using them.
- To reduce the risk of electric shock, do not immerse the hat press in water or other liquids.
- Do not operate the hat press with a damaged cord or if the equipment has been dropped or damaged. To reduce the risk of electric shock, do not disassemble or attempt to repair the heat press.
- This machine is not intended for use by children.
Using Notes:
- Check the voltage before using it.
- Return the hat press machine to the safety base when it’s heating or not in use.
- Do not clean the heating element with water.
- Keep the hat and designed picture completely dry.
- Please take the sample to test. The temperature and time depend on the material of picture, hat and the pressure.
- Remember to turn off and unplug the power cord when not in use.
- Do not allow cord to touch hot surfaces, allow heat press to cool completely before storing.
Note the Hat Types:
- Make sure the hat is not lined, otherwise, it will completely melt under a heat press.
- Not suitable for graduation caps as the cap itself is lined with fabric that melts at high temperatures.
- It’s not recommended that you do infusible ink or sublimation on the brim as you may damage the inner structure of the brim.
- The visor (cotton or polyester) may have light indentations after being pressed, which can be flattened with a scraper.
Specifications
Get to Know EENOUR CH2240 Hat Press
- Warming up(Light Blinks)
- Reached Set Temperature(Light Stays On)
How to Set Up EENOUR Hat Press?
Power On: Long press the power button for 3 seconds to turn it on, and then
the hat press starts to heat and the heating indicator blinks. Heat Levels
Setting: Short press the power button to set the heating level when the hat
press is on. Which light is in blinks indicates the heat level you have set.
Power Off: Long press the power button for 3 seconds to turn it off.
How to Use EENOUR Hat Pressing Form?
How to Use EENOUR Hat Pressing Base?
Operation Steps Guide
Part 1: Preparation Work
Part 2: Steps to Press a Hat
Safety Instructions
Note:
- The temperature and time of heating transfer depend on the material and thickness of the transfer pattern.
- The above parameters are for reference only. It’s recommended to test first before mass production.
Warranty
The product is with a 12-month warranty from the date of purchase (damages
from normal wear and tear, alteration, misuse, neglect, accident, service by
anyone other than the authorized service center, or act of God are not
included).
During the warranty period and upon verification of defects, this product will
be replaced when returned with proof of purchase.
Customer Support
If you need help regarding product issues, after-sales service, or other
relevant problems, please contact us via email:
support@eenour.com, and provide the following
information: Order ID Problem description
E-mail: support@eenour.com
Website: https://eenour.com/