EENOUR U1000PRO Mini Golf Range Finder User Manual

User Manual
Laser Rangefinder for Golf

U1000PRO

SAFETY REGULATIONS

Please read the safety regulations and operation guide carefully before operating. Improper operations without complying with this manual guide could cause damage to the device or inaccurate measurement.

Do not open or repair the laser rangefinder in any way, and it is strictly forbidden to illegally modify or change the performance of the laser transmitter of the item. Please do not place it in a place where children can reach it.
The electromagnetic radiation instrument may cause interference to laser rangefinder, so please do not use the laser rangefinder near aircraft or medical equipment. Do not use the item in a flammable and explosive environment.
Discarded laser rangefinder can not be disposed like household garbage, please handle them in line with related law and regulations.
Should you have any questions or problems on this item, please freely contact us (email: support@eenour.com), we are glad to help you!

PRODUCT INSTRUCTION

Thank you for choosing the EENOUR laser rangefinder U1000PRO, designed to deliver all of the precise distance measurement crucial to golfers.

SPECIFICATIONS.

• The maximum range is based on the measurement of light-colored buildings. Weather, target size, surface shape, etc. may affect the maximum amount of process. The accuracy is affected by the weather, whether the target reflection conditions are good, whether there is strong light interference and other factors. For details, refer to .

Features:

• Flag lock function;
• Vibration confirm;
• Objective lens: 18mm, wider field of view, and clearer screen;
• Speed measurement mode, which can capture the target speed in real time;
• Built-in 650mAh chargeable Li-ion battery, with USB Type-C charging port;
• OLED Red/Green Display, features a clear and functional reticle with 4 brightness intensity levels ;
• Slope Mode, which automatically calculates adjusted distances due to elevation changes.
• Horizontal and vertical distance, applied to engineering survey ;
• Class 1 pulse laser causing no harm to eyes;
• Noiseless operation, Auto power off;

RANGEFINDER DIAGRAM

OLED DISPLAY

HOW TO USE

DIOPTER ADJUSTMENT

Adjust the sight according to “right” and “left” on the knob

To focus/increase clarity, use the Diopter Adjustment by turning the Eyepiece. (Turn towards‘“right” such as farsightedness; Turn towards‘left” such as nearsightedness.)

SETUP MODES

Short press the button to select the mode.

1. Straight Line Distance Measurement: Measure the straight-line distance from device to target.

2. Flag Lock: Lock and measure the nearest target distance.

3. Slope Mode: Measure the compensating distance.

4. Horizontal and Vertical Distance Measurement:
   Measure the horizontal and the relative vertical distance from the device to the target.

5. Speed Measurement: Measure the real time speed of the moving target.

BRIGHTNESS, UNIT AND VIBRATION SETUP

Long press the button for 2s to set mode.

• Brightness setup
  Short press to select brightness level.
  **** Short press to choose the unit.

• Unit Setup
  Short press to select unit between M and Y.
  **** Short press to set vibration.

• Vibration Setup
  Short press to switch on/off the vibration.
  **** Short press to save setting result.

NOTE:

1. Vibration on, the device vibrates once after each measurement, and twice when flag mode locked.
2. Vibration off, the device won’t vibrate after each measurement, and vibrate twice when flag mode locked.

OLED BRIGHTNESS ADJUSTMENT

Long press , then short press to adjust the brightness level.
The system has set 1~4 levels, and if you adjust the brightness level, it will be retained when tum on again.

STRAIGHT LINE DISTANCE MEASUREMENT

Measure the straight-line distance.
Single Measurement: Short press once
Continuous Measurement: Long press to scan the distance

Please do the measurement over 3 meters.
Please check if the lens is clean;
Please confirm whether there is target overlap during measurement;

FLAG LOCK

Long press to aim at the target then scan left and right when measuring overlapping targets, then get the distance of the nearest target.

SLOPE MODE

Long press then align the flagpole to scan left and right, it support slope mode and flag lock at the same time, then the slope adjusted distance, actual distance and vertical distance will be shown on the display screen.

VERTIC, AND HORIZONTAL DISTANCE MEASUREMENT

Single Measurement: Short Press once
Continuous Measurement: Long Press to scan the the relative vertical distance and horizontal distance.

SPEED MEASUREMENT

Long press to measure the speed of a moving target ,the real time speed would be shown on OLED screen.

Please kindly noted that measure the speed of the front of a moving object.

OPERATIONAL NOTES

The multifunctional range finder does not emitted a visible beam. It uses a nondestructive vision infrared pulse laser, and then from the selected target reflection, back to the optical receiver. By measuring each pulse from the target and back, the laser rangefinder then uses its advanced diagnostic circuit to instantly calculate the measured distance. The maximum measuring range of the device depends on the target reflectivity, colour, surface finish, size and actual shape.

Try to use the device in below environment to guarantee the accuracy:

• Sunny Day
• Bright Target
• Shiny Surface
• Clear Air
• High Reflecting Surface

Below situation may cause measuring problems to the device:

• Black Target
• Snowy Rainy or Foggy
• Diffuse Surface
• Tiny Target
• Glass
• Dynamic Target
• Very Strong Light or Sunshine
• Charge the device when the icon shows to avoid bigger error under low power condition.
• DO NOT touch the lens by finger in order to protect the coating on lens.
• DO NOT disassemble the device which is calibrated by high precise instrument. Please send it to a professional maintenance department when the device gets problems.
• DO NOT wipe the lens with anything other than lens cloth.
• DO NOT carry the device with collision or weight.
• DO NOT make the device in baking or corrosion environment.
• DO NOT store the device under sunlight, dusty or temperature-abrupt environment.
• It should be kept in a dry, cool and ventilated place.
• DO NOT operate the device aiming to the sun or strong light source, which may damage the photosensor.

PACKING LIST

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>