EENOUR CA55L Car Mounted Refrigerator User Manual

EENOUR CA55L Car Mounted Refrigerator

Model: CA45/CA55
Thanks for your purchase.
Please read this manual carefully before using.

BEFORE FIRST USE
To prevent any internal damage, it is very important to keep this portable refrigerator upright through­out the journey. Please leave this unit standing upright on a level surface for about 6 hours before powering it on.

GENERAL INFO
With this manual you can find information regarding the proper use and maintenance of your­brand-new portable refrigerator. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Keep the manual in a safe place for future reference.

CONTACT US
We are ready to help you with any questions, concerns or issues about your new product. You can email us (support@eenour.com) for more information and help.

SAFETY REGULATIONS

Please use it according to safety regulations strictly.

WARNINGS!

• Please lay it aside with opening side upside for at least 6 hours before your first use.
• When faults occur, please stop using instantly, turn it off and pull out the power plug to avoid fire accident and electric shock.
• Please don’t cover or block the ventilation hole by small bar or wire.
• Please keep it away from water and don’t use it at humid places.
• Please don’t use flammable spray close to it.
• Please keep it away from high temperature places.
• Drug and academic samples can’t be preserved in it.
• Volatile and flammable matters can’t be preserved in it.
• Please use the AC adapter cable gently and don’t use the broken cable.
• Please don’t put electric appliances into it.
• Please use it at flat and even places as possible.
• When using it for a long time, please ensure that the inclination is less than 5 degree.
• When using it for a short time, please ensure that the inclination is less than 30 degree.
• If the inclination is over 30 degree when it is working, refrigeration efficiency will become low.
• Please keep the ventilation & heat dissipation condition good and ensure that the room within 7.9 inches around is empty enough when it works.
• Please don’t place it with side part up or upside down.

ATTENTIONS!

• Please don’t have it detached by anyone except from repair technicians to avoid fire accident, electric shock and getting injured.
• In order to get the best refrigeration effect, please close the lid in time after you opening it.
• It can not be played as a toy by kids or pets.
• Please choose a place that your kids can not reach to place the fridge lest they are trapped in it.
• Please preserve abandoned products properly.

NOTE!

• Please cut off the power supply before cleaning it and after using it.
• Please don’t defrost it by tools which are not recommended by the manufacture.
• If you plan not to use it for a long time, please clean it by alcohol or bactericide, dry it well and then preserve it properly.

Diagram And Accessories

1. TPE T-Latch
2. Control Panel
3. Exhaust Port
4. Power Interface
5. Wheel
6. Removable Partition
7. Bottle Opener
8. Drainage Outlet
9. Drawbar
10. Cup Holder
11. Graduated Scale

After the removable partition is removed, the new single zone can work normally as a unit.

Power supply

HOW TO USE

Note: Press the “set” button , the panel begins to blink then you are able to set the operations. If there isn’t any operations within 3 seconds, the panel will stop blinking and it ends setting and switches into normal working mode automatically.

POERATIONS
ON/OFF
Press the power button for 2~3s to turn it on/off.

DUAL/SINGLE ZONES
When the removable partition is installed, the two zones can be controlled totally independently and the temperature of the two zones will be displayed on the control panel, respectively.
When the center partition is removed, it can be used as a fridge with one new large zone and the con­trol panel will show the temperature of the left zone only.

ZONE REFRIGERATION CONTROL
Working with removable partition:
Long press “ ” to stop the refrigeration of the left zone and the corresponding display on the control panel will disappear.
Long press ” ” to stop the refrigeration of the right zone and the corresponding display on the control panel will disappear.

TEMPERATURE CONTROL
Press ” ” button once, left temperature display begins to blink and then press ” “/” ” to adjust the left zone temperature.
Press ” ” button twice, right temperature display begins to blink and then press ” “/” ” to adjust the right zone temperature.

Note: Temperature of the two zones is totally independently, which can be adjusted from -0.4 ° F ~ 50° F.

ECO/MAX SETTING
Press ” ” button three times to enter ECO/MAX setting, ECO/MAX begins to blink and then press “ “/ “ ” to switch between ECO/MAX mode. (The default setting is MAX)

BATTERY PROTECTION
Press “ ” button four times to enter battery protection setting, H / M / L begins to blink and then press “ “/ “ ” to switch between H / M / L mode. (The default setting is H)

Battery Protection Mode

| 12(V)| 24(V)
---|---|---
Compressor Stops Working| Compressor Starts Working| Compressor Stops Working| Compressor Starts Working
H| 11.3| 12.6| 24.3| 25.7
M| 10.8| 11.8| 22.3| 23.7
L| 9.6| 10.9| 21.3| 22.7

Note:
Voltages above is estimated values, for reference only.
Please set H mode when you use it in your car lest the car engine stops working due to the high power consumption.
Please set M / L mode when you connect it to a battery.

Food Preservation

• Please have foods wrapped by cling film or plastic bag before putting them into the fridge. Please cool down the fridge in advance before putting items easy to melt.
• Please don’t put drugs and academic samples which needs strict temperature control into it. Please do not preserve remained food for a long time.
• Please do not put too much food into it at one time.
• Please make volatile items wrapped well before putting them into it .

MAINTAINING

Cleaning

• Please rotate the drainage lid out and drain through the drainage outlet.
• Please wipe it by dry cloth with some detergent.
• Please don’t wash it by water.
• Please don’t wipe it by volatile liquid.

Defrosting

• Before defrosting, please keep the fridge empty and cut off the power supply.
• After defrosting, please wipe the water up by soft cloth.

When don’t use it for a long time.

• Please keep the fridge empty and cut off the power supply.
• Please keep the inside room dry.
• Please open the door and put it aside for several hours.
• Please keep it away from kids.

Troubleshooting

E3

| Compressor motor start error. (Motor is blocked or the refrigeration system pressure difference is over 5bar.)

E4

| Compressor motor rotation speed error. (Refrigeration system overload, the motor can not maintain the least rotation speed of 1850r/min.)

E5

| Overheating protection of the compressor in control system. (Refrigeration system overload or too high circumstance temperature, control system is overheating.)

Specification

WARRANTY

• Warranty: 1 year
• Please notice that we may not inform you each time the specification of this product changes.
• In order give you quick and accurate advice during your consultation time, please check points following carefully in in advance.
• Name of your product
• Order Number
• Please describe the details of the problem and send us the pictures / videos if possible, thanks a lot!
• If you have any problem or question about it, please freely send us email via support@eenour.com. Thanks a lot!.

Email Address

• support@eenour.com 
• Website: www.eenour.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>