CODE CM-SRT1645 LED Mirror Instruction Manual
- June 12, 2024
- code
Table of Contents
CODE CM-SRT1645 LED Mirror
Product Information
The LED mirror – SOLACE is a high-quality product that requires proper installation and maintenance. It operates on an input voltage of 220V~240V. The power supply must be switched off before installation, and the fuse should be removed or deactivated to ensure safety. All electrical works and connections must be done by a qualified electrician to avoid any potential dangers and to maintain the warranty.
IMPORTANT
- This is a high quality product and must be installed and maintained as per these instructions or it may invalidate the Warranty.
- When using electrical appliances, comply with basic safety precautions in order to reduce the risk of fire, electric shocks and personal injury.
- Input voltage of this product is 220V~240V. The power supply must be switched off before installation. Remove fuse or de-activate it, and make sure that it cannot be reactivated.
- All electrical works/connections must be done by a qualified electrician. Any failure to follow this can be particularly dangerous to users and will invalidate the warranty.
- DO NOT spray cleaning solutions directly to the glass. We recommend spraying cleaner directly to a soft cloth before applying.
- The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Children should be supervised so that they do not to play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Power ON/OFF
- Press to turn power on and off.
- The defogger is turned on or off with the mirror light.
- When the power in on, press and hold the touch switch to adjust brightness of the light.
Wireless Music
- On your phone/pad, enable your Bluetooth function.
- Search for ‘Elite mirror’ and Pair the mirror with your phone/pad Password : 1111
- The light & demister do not have to be on to use the music function. However there must be power to the unit.
INSTALLATION
Step 1: Decide what height (X) the mirror (top of mirror) sits from
floor. Work out height (Y) of wall bracket holes position from floor.
Height Y = Height X – H (you can find H of your mirror in the table provided)
Step 2: Fix the wall bracket in the required position. Please make sure there is timber fixing behind OR there is enough support to hold the mirror unit.
| Model | Distance “H” |
|---|---|
| CM-SRT1645 | (install horizontally) |
CM-SRT8060 CM-SRT1675 CM-SRT1575 CM-SRT1075
CM-SRT1275
| CM-SRT8075
(install horizontally) (install horizontally) (install horizontally)
(install horizontally)
| CM-SRT9075|
163mm
CM-SR650 CM-SO5080 CM-SR700B CM -SRM700B CM-SRT1075
CM-SRT1275
| CM-SR750 CM-SO6090 CM-SR900B CM -SRM900B
(install vertically)
(install vertically)
| CM-SR900 CM-SA4590 CM-SO5080B CM-SA4590B|
203mm
CM-SR1100 CM-SRT1575 CM-SRT1645
CM-SRT1675
| CM-SR1050B
(install vertically)
(install vertically) (install vertically)
| CM -SRM1100B|
273mm
Step 3
- Get a qualified electrician to connect the cable to the power supply.
- Hang the mirror up.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>