BaByliss 9004U 9000 Cordless Waver User Guide
- June 10, 2024
- BaByliss
Table of Contents
BaByliss 9004U 9000 Cordless Waver User Guide
The BaByliss 9000 is a cordless waver that comes with rechargeable Lithium Ion batteries. It is manufactured by The Conair Group Ltd and BaByliss SARL, and the product model is 9004U – Type F101a. The product dimensions are not mentioned in the manual. The product comes with a heat mat, heat glove, and a storage case. It can be carried as part of your carry-on baggage during air travel, subject to the airline’s discretion. The product comes with a 2-year guarantee for consumer use within the United Kingdom.
Product Usage Instructions
- Read the safety instructions first before using the product.
- To charge the styler, select the correct Fix to the adaptor pins for your mains outlet, plug it in, and press on the lock to release. The LED charging light will indicate the level of battery charge with different colors: flashing red (below 30% battery charge), flashing yellow (30% – 69% battery charge), flashing green (70% – 94% battery charge), solid green (95% – 100% battery charge).
- Charge the styler for 3 hours before the first use to get approximately 40 minutes of use. Charging for 5 hours will give you a full battery charge.
- To use the product, divide your hair into sections and touch and hold the rose gold panel with one hand while pressing and holding on the button for 2 seconds with your other hand.
- While still touching the rose gold panel with one hand, use your other hand to guide your hair between the barrels. Please make sure you touch and hold the rose gold panel with one hand, use your other hand on which the universal heat glove is worn to press, and hold the on button for 2 seconds.
- For thicker hair, use the higher heat setting. Test the heat settings to ensure you’ve got the correct temperature for your hair type. Start on the lowest setting and increase the temperature as necessary. The temperature selection options are High (180oC), Medium (170oC), Low (160oC), and Default temperature: 160oC.
- The gentle sound notification indicates that the target temperature is reached, and the styler is ready to use. The notification sound also indicates when the styler has switched off.
- Do not let the appliance come into contact with your scalp, face, ears, or neck while it is in use.
- If the charging light suddenly starts to flash rapidly, stop charging, remove the adaptor from the mains, and contact the Customer Care Centre for further advice.
SAFETY CAUTIONS
- This appliance should only be used as described within this instruction book. Please retain it for reference.
IMPORTANT SAFETY
- WARNING: Do not use this appliance near water contained in basins, bathtubs or other vessels.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- When the appliance is used in a bathroom, unplug it after charging since the proximity of water presents a hazard even when the appliance is switched off.
- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
- This appliance contains rechargeable batteries that must be removed before discarding the appliance. Unplug the appliance before removing the batteries. The battery is to be disposed of safely. For further information on removing the batteries, contact the Conair Customer Care Line (refer to the After Sales Service section for further information).
- WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance (CA86 adaptor).
- If the external flexible cable or cord of this transformer is damaged, it shall be replaced by the manufacturer or their service agent or a similarly qualified person in order to avoid a hazard.
- Always place the appliance on a flat, stable, and heat-resistant surface.
- Burn hazard. Keep appliances out of reach from young children, particularly during use and cool down.
- This appliance contains batteries that cannot be replaced.
- At the end of its life, the unit should be disposed of at a recycling center to safeguard the environment. If the battery leaks, avoid touching it and dispose of it at a recycling center.
READ THE SAFETY INSTRUCTIONS FIRST.
HOW TO USE
Warning : Hot surface! When in use, the appliance must never come into
contact with the scalp, face, ears, or neck.
CHARGING YOUR BABYLISS 9000 CORDLESS WAVER
-
First, select the correct adaptor pins for your main outlet.
-
Fix to the adaptor
-
Plug into the mains. Press on the lock to release.
-
This BaByliss 9000 cordless waver is very easy to use but before you do anything you must take your time to charge it for 3 hours before the first use.
-
A 3-hour charge will give you approximately 40 minutes of use and charging your styler for 5 hours will give you a full battery charge.
-
Please note your styler will not function while charging.
-
Whilst your styler is charging, the LED charging light will flash slowly and continuously with the color indicating the level of battery charge.
-
Flashing red
= below 30% battery charge -
Flashing yellow
= 30% – 69% battery charge -
Flashing green
= 70% – 94% battery charge -
Solid green
= 95% – 100% battery charge
WARNING : If the charging light suddenly starts to flash rapidly then the appliance is faulty. If this happens, please stop charging and remove the adaptor from the mains and contact our Customer Care Centre for further advice.
INSTRUCTIONS FOR USE
- Once the styler is switched on it will automatically start heating up to160°C.
- There are 3 temperature settings 160°C, 170°C, and 180°C which are indicated by the LEDs as shown below.
- To select the temperature setting press the on/off button once, twice or three times.
- The LEDs will flash when your styler is heating up and will stop flashing once the target temperature is reached and it is ready to use
- If you have delicate, fine, bleached, or colored hair, use the lower heat setting. For thicker hair, use the higher heat setting. We suggest when using for the first time you test the heat settings to ensure you’ve got the correct temperature for your hair type. Start on the lowest setting and increase the temperature as necessary.
- Ensure your hair is dry and combed through.
- Divide hair into sections.
- Please note: Before styling make sure the universal heat glove is worn on the hand which is guiding the hair between the barrels.
- Take a section of hair and clamp the hair between the barrels by pressing the appliance together.
- Hold in place for 5-8 seconds. Take care to avoid the hot surfaces of the appliance coming into contact with the skin, in particular the eyes, ears, face and neck.
- Release the appliance from the hair and gently slide down to the next section. Re-position the appliance to overlap the last wave created, to ensure a continuous wave effect in the hair.
- Continue this action down the entire hair section, towards the ends of the hair.
- Allow hair to cool before combing through.
- To switch off your styler please press and hold the on/off button for 2 seconds. The gentle notification sound indicates the styler has switched off.
- Allow to cool before storing away.
BATTERY STATUS INDICATOR
The battery status indicator LED will change color depending on the amount of battery charge.
- Green = 100% – 70%
- Yellow = 69% – 30%
- Red = Below 30%
- No light with audio indicator = 0%
SLEEP MODE
- If your styler has not been used for 5 minutes then it will automatically enter sleep mode where the temperature will lower to 120°C.
- The styler will automatically turn off after being in sleep mode for 5 minutes.
- To exit sleep mode press the on/off button once.
AIR TRAVEL
Please note that the BaByliss 9000 contains rechargeable Lithium Ion batteries and can be carried as part of your carry-on baggage. This is subject to the individual airline’s discretion. We advise to check directly with the airline before you travel.
HEAT MAT
- Your cordless styler comes with a heat mat for use during and after styling.
- During use, do not place your styler on any heat-sensitive surface, even when using the heat mat
HEAT GLOVE
Your cordless styler comes with a heat glove to help protect your hand from
temporary contact with the barrel this is to be worn on the hand guiding the
hair between the barrels. The heat of the protective glove is only designed to
give initial contact protection. Discomfort will be caused by prolonged
contact with the hot surface.
STORAGE CASE
- Your styler comes with a storage case.
- Once your styler is switched off and cooled, it can be stored away in the storage case.
UK GUARANTEE
This BaByliss appliance is guaranteed for consumer use for 2 years and is only
valid within the United Kingdom. This guarantee covers consumer use only i.e.
defects occurring under normal use within the home from the date of purchase
or date of delivery, whichever is later. If the product develops a fault due
to defects in materials or manufacture within the guarantee period, Conair UK
After Sales Service will repair or replace the product.
EXCLUSIONS
This guarantee will no longer be valid meaning that The Conair Group Ltd will
not be liable to repair or replace your product where:
- The appliance has been used on a voltage supply other than that which is marked on the product
- The appliance is used for professional/non-domestic usage
- Repairs or alterations have been attempted by unauthorized persons
- The failure of the appliance is a direct result of misuse
- The failure is a result of not following the instructions for the use
This guarantee does not cover any cosmetic damage due to misuse of the product or any damage to persons or property that occurs because of product misuse. Guarantees on replacement products run from the original purchase date or date of delivery, whichever is later, and not from the date of replacement. This guarantee is an additional benefit and does not affect your statutory rights as a consumer. If you have any queries regarding this guarantee please contact the Conair Customer Care Line on 03705 133 191 (09:00 to 17:00 Monday to Friday) or e-mail ukinfo@conair.com
UK AFTER-SALES SERVICE
For further advice on using your BaByliss 9000 Cordless Waver or should you
need to return it, please contact the Conair Customer Care Line on 03705 133
191 (09:00 to 17:00 Monday to Friday) or e-mail your inquiry
to ukinfo@conair.com
RETURN ADDRESS
- Customer Care Centre
- Conair Logistics, Unit 4, Revolution Park,
- Buckshaw Avenue, Buckshaw Village, Chorley. PR7 7DW
- Please enclose your return number, name, and address details, together with a copy of proof of purchase and details of the fault.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>