COOPER LIGHTING ADF140680 40 Watt 2 Light White Instruction Manual
- June 13, 2024
- COOPER Lighting
Table of Contents
COOPER LIGHTING ADF140680 40 Watt 2 Light White
Product Information
The ADF140680 is a lighting fixture that requires careful installation and handling to ensure safety. It is important to read and follow the instructions provided in the user manual for proper installation and usage.
Product Usage Instructions
SNF/SSF Installation
- Step 1: Flip socket track in place.
- Step 2: Apply screws on the sides of the channel (for T12HO and Slimline, SSF models only).
- Step 3: Install the channel cover with quarter turns provided.
Conduit Installation
- Remove KO and install fitting.
- Flip socket track in place.
Note: For conduit installation, refer to Figure 2 and follow the instructions provided in Step 2 of the Assembly Instructions.
Row Aligner Instructions
- Step 1: Bend the row aligner and separate it from the socket track.
- Step 2: Insert the row aligner into the channel. Insert a wire holder if running a harness along the row of fixtures.
- Step 3: Add screws on the side of channels (SSF models only).
- Step 4: Insert the harness into the wire holder if applicable. Note: The endplate must remain in place at the end of the row.
Ensure that you handle the product with care as the edges may be sharp.
Disconnect power and allow the fixture to cool before changing the bulb or
handling the fixture to avoid the risk of burns.
Dispose of lamps containing mercury according to local, state, or federal
laws.
Please retain the user manual for future reference and contact a qualified
electrician if you are not qualified to install theproduct.
Safety Instructions
IMPORTANT: Read carefully before installing fixture. Retain for future
reference.
WARNING
Risk of fire, electrical shock, cuts and or other casualty hazards. This
product must be installed in accordance with the applicable installation code
by a qualified electrician or a person familiar with the construction and
operation of the product and the hazards involved. Cooper Lighting Solutions
assumes no responsibility for claims brought about by improper or careless
installation or handling of this product.
ATTENTION
Receiving Department: Note actual fixture description of any shortage or
noticeable damage on delivery receipt. File claim for common carrier (LTL)
directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be
retained.
CAUTION
- Edges may cut. Handle with care.
- Risk of burn. Disconnect power and allow fixture to cool before changing bulb or handling fixture.
WARNING
Risk of fire and electric shock. If not qualified, consult an electrician.
NOTICE
- Green ground screw provided in proper location. Do not relocate.
- Lamps contain mercury, dispose according to local, state, or federal laws.
- If supply wires are located within 3 inches of ballast, use wire rated for at least 90°C (194°F).
Warranties and Limitation of Liability
Please refer to www.cooperlighting.com for
our terms and conditions.
Cooper Lighting Solutions
1121 Highway 74 South Peachtree City, GA 30269
www.cooperlighting.com
© 2020 Cooper Lighting Solutions All Rights Reserved
Printed in USA
Cooper Lighting Solutions is a registered trademark.
All trademarks are property of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>