AUDIBAX PRO8P Professional Passive Speaker User Manual
- June 13, 2024
- AUDIBAX
Table of Contents
USER’S MANUAL
PRO8P / PRO10P
PRO12P / PRO15P
Professional Passive Speaker
WELCOME TO AUDIBAX
Thank you very much for choosing Audibax. We hope you enjoy your new product.
It has been developed and designed paying attention to the smallest details, with quality control with European standards supervised by our great team of professional technicians, who work every day to offer our customers the best quality.
We make sure that every Audibax product is built to last long. All our references are made with long lasting materials and our specialists are dedicated to constantly doing quality controls to guarantee the best result.
Please read carefully this manual in order to use your Audibax product in the best way. Do not hesitate to visit our website for further information: www.audibax.com
SAFETY INSTRUCTIONS
GENERAL INFORMATION
– It is important to read and follow the instructions carefully.
– Keep all information and instructions in a secure location.
– Always follow the instructions provided.
– Take note of all safety warnings and never remove them from the equipment.
– Use the equipment only as intended and for its intended purpose.
– Ensure that the stands and/or mounts used are sufficiently stable and
compatible for fixed installations. Wall mounts should be properly installed
and secured, and the equipment should be installed securely to prevent falls.
– When installing the equipment, be sure to observe the relevant safety
regulations in your country.
– Do not install or operate the equipment near sources of heat, such as
radiators, heat registers, or ovens, and ensure that it is always cooled
sufficiently and cannot overheat.
– Do not place sources of ignition, such as burning candles, on the equipment.
– Keep ventilation slits unobstructed.
– For equipment designed for indoor use only should not be used near water,
flammable materials, fluids, or gases. Special outdoor equipment should be
used in accordance with the manufacturer’s instructions.
– Ensure that no dripping or splashed water can enter the equipment and do not
place containers filled with liquids on the equipment.
– Prevent objects from falling into the equipment.
– Use the equipment only with recommended accessories intended by the
manufacturer.
– Do not attempt to open or modify the equipment.
– Check all cables after connecting the equipment to prevent accidents or
damage due to tripping hazards.
– During transport, take steps to prevent the equipment from falling and
causing damage or injury.
– If the equipment is not functioning properly, fluids or objects have gotten
inside, or is otherwise damaged, switch it off immediately and unplug it from
the power outlet (if applicable). Only authorized, qualified personnel should
repair the equipment.
– Clean the equipment with a dry cloth.
– Comply with all applicable disposal laws and separate plastic and
paper/cardboard during packaging disposal.
– Keep plastic bags out of the reach of children.
FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:
– ATTENTION: If your equipment has a power cord with a grounding plug, it must
be connected to a wall outlet with a ground connection. Never remove the
grounding plug from the power cord.
– If your equipment has been exposed to extreme temperature changes, allow it
to reach room temperature before turning it on. Otherwise, moisture and
condensation may damage the equipment.
– Before plugging in the equipment, make sure that the voltage and frequency
of the power outlet match the specifications of the equipment. If the
equipment has a voltage selector, only connect it to the power outlet if the
values match. If the power cord or adapter does not fit your outlet, contact
an electrician.
– Do not step on the power cord. Make sure it is not pinched at the outlet,
adapter, or equipment connection.
– Keep the power cord or adapter within reach and disconnect the equipment
from the power supply when not in use or when cleaning it. Always unplug the
cord or adapter by pulling the plug or adapter, not the cord. Never touch the
cord or adapter with wet hands.
– Avoid frequently turning the equipment on and off, as this can reduce its
useful life.
– IMPORTANT: Only replace fuses with those of the same type and rating. If a
fuse repeatedly blows, contact an authorized service center.
– To completely disconnect the equipment from the power mains, unplug the
power cord or adapter from the outlet.
– If your device has a Volex power connector, the mating Volex connector must
be unlocked before it can be removed. Be careful when laying cables, as the
equipment can slide or fall if the power cord is pulled.
– Unplug the power cord or adapter before an extended period of disuse or in
case of lightning strike risk.
– Only install the equipment when it is disconnected from the power source.
– To prevent damage and overheating, qualified personnel should regularly
clean and service the equipment depending on ambient conditions like dust,
nicotine, and fog.
If the product contains the following symbols, please, read carefully:
| CAUTION
---|---
Risk of Electric Shock.
Disconnect all power sources before servicing
CAUTION: To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
IMPORTANT INFORMATION
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This equipment is designed for professional purposes and its commercial use
must comply with the applicable national rules and regulations for accident
prevention.
As the manufacturer of this product, Audibax has the responsibility to inform
you about the potential health risks associated with its use. One such risk is
hearing damage caused by prolonged exposure to high volume.
When this product is in use, it can generate high sound-pressure levels that
may cause irreversible hearing damage to performers, employees, and audience
members.
To prevent this, it is important to avoid exposing yourself or others to
volumes exceeding 90 dB for an extended period of time.
PACKAGE CONTENT
– 1 x PRO8P / PRO10P / PRO12P / PRO15P
– 1 x User manual
– 1 x Power cord
– 1 x Signal line
PRODUCT DESCRIPTION
Model No.: | PRO8P | PRO10P |
---|---|---|
Construction: | 8″ Bass-reflex passive speaker | 10″ Bass-reflex passive speaker |
Woofer: | 8” VC 2.0” Magnet 40oz 8ohm | 10” VC 2.0” Magnet 40oz 8ohm |
Tweeter: | 1″(25mm+11oz magnet) | |
Titanium | 1″(25mm+11oz magnet) |
Titanium
Frequency Response:| 58Hz-20KHz| 55Hz-20KHz
Impedance:| 8 OHM| 8 OHM
Input:| 2 x speakon connectors| 2 x speakon connectors
RMS Power:| 150Watts| 180Watts
SPL:| 119dB (Constant)
125dB(Peak)| 120dB (Constant)
126dB(Peak)
Crossover frequency:| 2.6KHz 12dB/octave| 2.5KHz 12dB/octave
G.W.:| 7 KG| 9 KG
Package Size:| 31x30x48cm| 35x33x56cm
Model No.:| PRO12P| PRO15P
---|---|---
Construction:| 12″ Bass-reflex passive speaker| 15″ Bass-reflex passive
speaker
Woofer:| 12” VC 2.0” Magnet 40oz 8ohm| 15” VC 2.0” Magnet 40oz 8ohm
Tweeter:| 1″(34mm+11oz magnet)
Titanium| 1″(44mm+11oz magnet)
Titanium
Frequency Response:| 48Hz -20KHz| 40Hz -20KHz
Impedance:| 8 OHM| 8 OHM
Input:| 2 x speakon connectors| 2 x speakon connectors
RMS Power:| 300Watts| 400Watts
SPL:| 127dB (Constant) 130dB (Peak)| 129dB (Constant) 133dB (Peak)
Crossover frequency:| 2.5KHz 12dB/octave| 2.6KHz 12dB/octave
G.W.:| 16kg| 20kg
Package Size:| 42x41x68cm| 48x45x76cm
SYSTEM CONNECTIONS
AMPLIFIER AMPLIFIER
L – OUTPUT R – OUTPUT
Connect passive speaker to the left and right pro amplifier using pro speaker cables with speakon connectors.
Note: Be sure to rotate the speakon connectors clockwise until they lock in place!
FACILITIES
SPEAKON
1+ POSITIVE
1- NEGATIVE
2+ NOT USED
2- NOT USED
BALANCED XLR
1 GROUND
2 HOT
3 COLD
6.3mm Balanced Jack
TIP HOT
RING COLD
SLEEVE GROUND
.3mm Unbalanced Jack
TIP HOT
SLEEVE GROUND
GENERAL NOTES
– Amplifier connection. In order to avoid damage, it is advisable to establish
and follow a pattern for turning on and off your sound system.
– With all system parts connected, turn on source equipment, tape decks, cd
players, mixers, effects processors etc. BEFORE turning on your power
amplifier. Many products have large transient surges at turn on and off which
can cause damage to your speakers.
– By turning on your power amplifier LAST and making sure its level control
are set to – minimum any transients from other equipment will not reach your
loudspeakers.
– Wait until all system parts have stabilized usually a couple of seconds.
– Similarly when turning off your system always turn down the level controls
on your power amplifier and then turn off its power before turning off other
equipment.
– Cables- never use shielded or microphone cable for any speaker connections
as this will not be substantial enough to handle the amplifier load and could
cause damage to your complete system.
DISPOSAL
Packaging:
- The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.
- Please follow the laws and regulations regarding disposal and recycling of packaging in your country.
Device:
- This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used device must be disposed of through an approved disposal company or a municipal disposal facility. Please comply with the applicable regulations in your country.
- Please follow all the disposal laws and regulations in your country.
- As a customer, you can obtain information on environmentally-friendly disposal options from the product seller or the appropriate regional authorities.
THIS DOCUMENT MAY BE SUBJECT TO MISPRINTS, ERRORS OR TECHNICAL MODIFICATIONS.
DATA SHEET
Brand: | Audibax | Audibax |
---|---|---|
Product Name: | PRO8P | PRO10P |
ID: | 10242051 | 10242052 |
EAN: | 7427244399777 | 7427244399784 |
Category: | Audio Passive Speakers | Audio Passive Speakers |
Design: | Standard | Standard |
Woofers: | 8″ | 10″ |
Number of Woofers: | 1 | 1 |
RMS power: | 150W | 180W |
Peak Power: | 500W | 500W |
Impedance: | 8 ohms | 8 ohms |
Color: | Black | Black |
Height: | 42.5cm | 51cm |
Width: | 25.5cm | 30cm |
Depth | 25cm | 29cm |
Weight: | 7kg | 9kg |
Brand | Audibax | Audibax |
--- | --- | --- |
Product Name | PRO12P | PRO15P |
ID | 10223204 | 10223205 |
EAN | 7427244397896 | 7427244397902 |
Category | Audio | Audio |
Subcategory 1 | Speakers | Speakers |
Subcategory 2 | Passive Speakers | Passive Speakers |
Design | Standard | Standard |
Subwoofer | 12″ | 15″ |
No. Woofers | 1 | 1 |
RMS power | 300W | 400W |
Peak power | 1000W | 1500W |
Impedance | 9 ohms | 10 ohms |
Color | Black | Black |
Height | 61cm | 68cm |
Width | 35cm | 42cm |
Background | 34.8cm | 38cm |
Weight | 16kg | 20kg |