REPOTEC 02-RP-IMC811FP Industrial Gigabit PoE Media Converter User Manual

: June 13, 2024
: REPOTEC

Table of Contents

REPOTEC 02-RP-IMC811FP Industrial Gigabit PoE Media Converter
FCC MARKING
Key Features
Introduction
Installation package
Power connection
Dip switch function
LED indicator
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

REPOTEC 02-RP-IMC811FP Industrial Gigabit PoE Media Converter

Product Information

Product Name: Industrial Gigabit PoE Media Converter
Features:
- Designed with hardened Marvell IC
- Delivers 30Watts of PoE power
- Tolerates extreme temperatures in a harsh environment
- Cold Design technology reduces excessive heat
- Accepts input voltages from 48VDC to 56VDC
- Meets IEEE802.3af/at the required voltage
- Rigorously tested for security, transportation, and telco applications
Package includes: Din-rail brackets and wall mount brackets
Power Connection: 4-pin terminal block, supports 48-56VDC input voltage
Dip Switch Function: Can be adjusted to change the default function of the unit
Specifications:
- IEEE Standards: 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.3af, 802.3at
- Switch Architecture: Store and Forward
- Data Processing Flow Control: IEEE 802.3x Flow Control and Back Pressure
- Jumbo Frame: 9KB
- Network Connector: 1x RJ-45 10/100/1000BaseT(X) PSE with PoE Output power up to 30Watts, 1 x 100/1000M SFP
- Network Cable: UTP/STP above Cat.5e Cable EIA/TIA-568 10-ohm (100m)
- Protocol: CSMA/CD
- LED Indicators: PWR (Green), SFP Link/Act (Green), RJ-45 port: Link/Act (Green)
- PoE Pin Assignment: Present
- DIP Switch: 4-pin terminal block with 48V-56V VDC Power Input
- Relay Contact: RLY (Relay) – Relay switch for alarm Relay outputs with a current carrying capacity of 1 A @24VDC
Power Consumption: Not specified
Removable Terminal Block: Yes
Operating Temperature: Not specified
Operating Humidity: Not specified
Storage Temperature: Not specified
MTBF (mean time between failure): Not specified
Housing Case Dimension (L X W X D) mm: Not specified
Installation mounting: Can be din-rail or wall-mounted
Certifications:
- Safety: EN 60068-2-6
- Safety EMC/EMS: EN 60068-2-27
- EMI: EN 60068-2-32

Product Usage Instructions

Choose the appropriate mounting option: din-rail or wall mount.
Connect the power source using the provided 4-pin terminal block. Make sure the input voltage is within the supported range of 48-56VDC.
It is recommended to use a 56VDC input for optimal IEEE802.3at 30Watts power.
To connect power, follow the printed polarity for V+, V-, and Ground. Connect the positive wire to V+, the negative wire to V-, and the neutral wire to the ground.
Ensure that the power source is shut off before connecting the power wire.
Adjust the dip switches located on the front panel to change the default function of the unit according to your desired environment. Refer to the table provided in the user manual for dip switch settings.
Monitor the LED indicators to check the status of power, SFP port, and RJ-45 port.
For any alarm relay connection, use the RLY (Relay) terminal.

30W PSE + 1 x 100/1000M SFP, 48-56 VDC input

FCC MARKING

This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation.

CE MARKING
This equipment complies with the requirements relating to electromagnetic compatibility, EN 55032/35 class A for ITE, the essential protection requirement of Council Directive 2014/30/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. The company has an ongoing policy of upgrading its products and it may be possible that the information in this document is not up-to-date. Please check with your local distributors for the latest information. No part of this document can be copied or reproduced in any form without written consent from the company.

Trademarks
All trade names and trademarks are the properties of their respective companies.

Key Features

Hardened Industrial graded Marvell IC
Rugged design Aluminum enclosure 103.5x32x81.5mm (LxWxD)
Supports 30Watts PSE on TX port
Supports SFP fiber speed 100M or 1000M dual mode
Surge protection diodes on power input.
ESD protection diodes on RJ-45 port
Provides increased noise immunity
Works in extreme environments -40°C to 75°C

Introduction

This Rugged Industrial PoE Media Converter is designed with a hardened Marvell IC, delivering 30 watts of PoE power to your PD while tolerating extreme temperatures in a harsh environment. Our Cold Design technology will not only power up your PD device but also reduce the excessive heat problem to a minimum. It accepts input voltages from 48VDC to 56VDC to meet IEEE802.3af/at the required voltage. It has been rigorously tested for your security, transportation, and telco applications.

Installation package

This unit can be din-rail or wall mounted. Din-rail brackets and wall mount brackets are included.

Power connection

This unit provides a 4-pin terminal block. It can be operated using a 48-56VDC power source. Always make sure your input voltage is within this supported voltage range. 56VDC input is suggested for optimal IEEE802.3at 30Watts power. To connect power: Follow the printed polarity for V+, V-, and Ground. Connect the positive wire to V+, connect the negative wire to V-, and connect the neutral wire to the ground.
+V- is for the power input connection, this unit has only one power input.

RLY is for relay connection
Power connecting procedure:

STEP 1 – Take out the 4-pin terminal block located in the included mounting kit package.
STEP 2 – Connect power wire to +V- with correct polarity and connect RLY for relay. Connect the grounding wire to the ground screw.
STEP 3 – Plug into the terminal block socket shown above. Polarity needs to match V+ and V-.
WARNING — Always SHUT OFF the power source to connect the power wire.
WARNING — Any exceeded input voltage will not make this unit function and may damage this unit.

Dip switch function

This unit is equipped with dip switches, located on the front panel. Adjusting the dip switches will change the default function of this unit. This unit has been set to manufacturer default as SFP speed 1000M.
The table shows that you may change the dip switch setting to your desired environment.

LED indicator

Specifications

IEEE Standard

| IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet

IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet

IEEE802.3x Flow Control and Back Pressure, IEEE802.3af for PoE

IEEE802.3at for PoE+

---|---
Switch Architecture| Back-plane (Switching Fabric): 4Gbps
Data Processing| Store and Forward
Flow Control| IEEE 802.3x Flow Control and Back Pressure
Jumbo Frame| 9KB

Network Connector

| 1xRJ-45 10/100/1000BaseT(X) PSE with PoE Output power up to 30Watts

1 x 100/1000M SFP

Network Cable| UTP/STP above Cat.5e Cable
EIA/TIA-568 10-ohm (100m)
Protocol| CSMA/CD

LED

| PWR (Green): ON－Power is detected

OFF－Power is not detected SFP Lnk/Act (Green): ON－FX port is detected

Flashing－FX data is transmitting/receiving

RJ-45 port:

Lnk/Act (Green): ON－TX port is detected

Flashing－TX data is transmitting

PoE (Amber):

ON – PD is detected on designated port.

OFF – no PD is detected.

PoE Pin Assignment| 30 watts 2 pairs Mode A End Span

V+, V+, V-, V- for pin 1, 2, 3, 6

DIP Switch

| DIP 1: Reserved

DIP 2: 1000M－SFP speed 1000M (Default)

100M－SFP speed 100M

Reverse Polarity P rotection| Present
Overload C urrent P rotection| Present
Power Supply| 4 pin terminal block with 48V-56V VDC Power Input RLY (Relay): Relay switch for alarm
Alarm Relay Contact| Relay outputs with current carrying capacity of 1 A

@24VDC

| Relay in short circuit mode when power fails. In open circuit mode when power supply is

connected

---|---
Power Consumption| 2 W@48 VDC full load, Without PoE
PoE power| Maximum PoE power 36 Watts at 56VDC input

Removable Terminal Block

| Provide 4 pin terminal block

Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm

Wire Strip length: 7-8mm

Housing Dimension (mm)

NOTE:
The housing dimension is for the purpose of showing product Length, Width, Height, din-rail, and terminal block’s position and dimension. Please reference the LED Indicator Page for the correct port order.