Skydance V2-L(WT) Wifi and RF 22 in 1 LED Controller User Manual

Skydance V2-L(WT) Wifi and RF 22 in 1 LED Controller User Manual

Features

• 2 in 1 function, used for control color temperature or single color LED strip.
• DC12-48V input, 2 channel constant voltage output.
• Tuya APP cloud control, support on/off, color temperature and brightness adjust, delay turn on/off light, timer run, scene edit and music play function.
• Voice control, support amazon ECHO and TmallGenie smart speaker.
• Match with RF 2.4G remote control optional.
• User need set light type by press key before Tuya APP network connection and match RF remote of the same light type.
• Each V2-L(WT) controller can also work as WiFi-RF converter, then use Tuya APP to control one or more RF LED controller or RF LED dimming driver synchronously.
• Light on/off fade time 3s selectable.
• Connect with external push key to achieve on/off and 0-100% dimming function.
• PWM frequency 500Hz, 2KHz, 8KHz or 16KHz selectable.
• Over-heat / – / , Over load Short circuit protection recover automatically

Technical Parameters

Input and Output

Input voltage| 12-48VDC
Input current| 16.5A
Output voltage| 2 x (12-48)VDC
Output current| 2CH,8A/CH
Output power| 2 x (96-384)W
Output type| Constant voltage
Safety and EMC

EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Environment

Operation temperature| Ta: -30 O C ~ +55 O C
Case temperature (Max.)| T c:+85O C
IP rating| IP20
Dimming data

Input signal| Tuya APP + RF 2.4GHz + Push Dim
Control distance| 30m(Barrier-free space)
Dimming gray scale| 4096 (2^12) levels
Dimming range| 0 -100%
Dimming curve| Logarithmic
PWM Frequency| 500Hz, 2KHz, 8KHz or 16KHz
Warranty and Protection

Warranty| 5 years
Protection| Reverse polarity
Over-load
Short circuit
Weight

Net weight| 0.107kg
Gross weight| 0.126kg

Mechanical Structures and Installations

System wiring

Wired connection
Wireless connection

Note:

1. T above distance is measured in spacious he (no obstacle) environment, Please refer to the actual test distance before installation.
2. Users can also use the Tuya Bluetooth gateway to realize remote control and voice control.

Wiring Diagram

• V2-L(WT) for single color
  

• V2-L(WT) for dual color
  

Note:

1. After changed the light type by DIP switch, please redo the tuya APP cong operation.
2. For CCT light type, continuous power on and off will change 3 levels color temperature (WW, NW and CW) in sequence.
3. Switch off the power, then switch on power, repeat again.
   Immediately short press match key 3 times, the light on/off time will change between 3s and 0.5s.

Push Dim

return dimming)

Tuya APP network connection

Press and hold Match key for 2s, or push twice Match key fastly:
Clear previous network connection, enter Smart config mode, the blue LED indicator flash fastly, the output LED will flash 10 times.

Press and hold Match key for 5s:
Clear previous network connection, enter AP config mode, the blue LED indicator flash slowly. If smart config failed, please try AP config.

Repeat power on and off for 5 consecutive times, also clear previous network connection, enter Smart config mode, the output LED will flash 10 times.

If Tuya APP network connection succeed, the blue LED indicator will stop flash, and in Tuya APP, you can find DIM/CCT device.

Tuya APP interface

White interface
For DIM type:
Touch brightness slide to adjust brightness.

Color temperature interface
For CCT type:
Touch color wheel to adjust color temperature. Touch brightness slide to adjust brightness.

Scene interface
The 1-4 scene is static color.
the inner color of these scene can be editable.

Music, Timer, Schedule
The music play can use smart phone music player or micro-phone as music signal input.

The Timer key can turn on or turn off light in the next 24 hours.

The Schedule key can add multiple timers to turn on or turn off light according to different time periods.

PWM frequency setting

We can select four PWM frequency: 500Hz, 2KHz, 8KHz or 16KHz. Higher PWM frequency, will cause lower output current, higher power noise, but more suitable for camera(No flickers for video)

V2-L(WT) match remote control (Optional)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the V2-L(WT)’s Match key

Match:
Short press match key of V2-L(WT), immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key of V2-L(WT) for 10s, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power of V2-L(WT), then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power of V2-L(WT), then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

V2-L(WT) work as WiFi-RF converter to match RF LED controller or dimming

driver

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key of the controller, immediately press on/off key on the Tuya APP. The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key of the controller for 5s, The LED indicator fast flash a few times means match was deleted.

Use Power Restart

Match:
Switch off the power of the controller, then switch on power, repeat again. Immediately short press on/off key 3 times on the Tuya APP. The light blinks 3 times means match is successful.

Delete:
Switch off the power of the controller, then switch on power, repeat again.
Immediately short press on/off key 5 times on the Tuya APP. The light blinks 5 times means match was deleted.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>