VEVOR 150W PGL-C1 LED Grow Light Instruction Manual

: June 13, 2024
: VEVOR

Table of Contents

VEVOR 150W PGL-C1 LED Grow Light
Product Information
Installation Instruction
Application
Photosynthesis
Product recovery
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VEVOR 150W PGL-C1 LED Grow Light

VEVOR-150W-PGL-C1-LED-Grow-Light-product-image

Product Information

The LED Grow Light is available in various models:

150W PGL-C1
200W PGL-G1
300W PGL-X1
400W PGL-Z1

This LED Grow Light is designed for indoor use only. It is important to read the user manual carefully before operating the product. The appearance of the product may vary from the images provided. Please note that VEVOR reserves the right to interpret the user manual and may update the technology or software without prior notice.

The luminaire should not be looked at for prolonged periods of time to avoid eye strain.

This device complies with Part 15 of the FCC Rules, which governs its operation to prevent harmful interference. It must accept any interference received, including interference that may cause undesired operation.

Installation Instructions

Hanging the lamp on the ceiling or other secure places using the provided lifting rope.
Connect the plug to a socket and then connect it to a power source with an input voltage range of AC 100-277V.

Choosing Dimmer Knob
The dimmer knob has a total of 5 gears:

25%
50%
75%
100%
RJ control gear

Rotate the appropriate brightness gear according to your actual usage. When the dimmer gear switch is set to EXT/OFF, it switches to the RJ port dimmer function, allowing you to adjust the brightness through the RJ controller.

Application
Note: The following suggestion is for reference only. You can freely adjust it based on your actual situation.

For maximum coverage, set the LED Grow Light to high power and position it further away from the plants. For a more eco-friendly option, set it to lower power and position it closer to the plants.

Photosynthesis Output Spectrum Test Report
Electrical Parameter:

Input Voltage: AC100-277V
Power Cord: Connect the plug to the power source
Application: This LED Grow Light is specifically designed for hemp/cannabis/Marijuana lighting.

Application Environment:

Humidity: 95%
Air Pressure: 90-106 Kpa

Package

1 x LED Grow Light
1 x Installation Instruction
2 x Lifting Ropes
1 x Plug
2 x Hook
2 x Stopper

Shipping and Warehousing

Please handle the product with care during transportation and unloading to avoid damage.
It is recommended to store the LED Grow Light in a warehouse with a temperature range of -10 to 60 degrees Celsius and maintain a dry environment.

Product Recovery:
This product complies with European Directive 2012/19/EC. The symbol of a crossed-out wheelie bin indicates that the product requires separate refuse collection in the European Union. Please do not discard this product or its accessories with normal domestic waste. Instead, take them to a collection point for recycling electrical and electronic devices.
Manufacturer: SLT Lighting Technology (Dongguan) Co.,Ltd.
Address: No.201, 2nd Floor, 2BLDG, Gongchang Road 353, Huangjiang Town

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

Please read this manual carefully before using the product.

Notes before Installation

Be careful to open the carton, and contact us if there is any damage.
Non-professional technicians, please do not repair or modify this product without authorization.
Please turn off the power before installation to avoid improper operation.
To ensure the lifetime of the product, please do not use it in a place with strong acid mist.
Please check whether the voltage marked on the luminaire is consistent with the input voltage to be connected, so as not to damage the LED luminaire.
Make sure the installation position can withstand 10 times the weight of the luminaire before installation and install it at a flat place without vibration, no swing, and no fire hazard.
Type X connection: (refers to the power cord that can be separated and replaced by the user)

If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

Acceptable For Indoor Use only.
The luminaire shall be positioned in such a way that prolonged gazing at the luminaire is not permitted.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

This device may not cause harmful interference
this device must accept any interference received, including interference that may cause undesired operation.

Installation Instruction

Hanging the lamp on the ceiling or other secure places with lifting rope.
Connecting the plug to the socket, connect the plug to the power source.
Choosing dimmer knob ：There are a total of 5 gears, 25%/50%/75%/100% four brightness gears,one RJ control gear. Just rotate the appropriate brightness gear according to the actual usage.
When the dimmer gear switch is set to EXT/OFF, it switches to the RJ port dimmer function, and you can adjust the brightness through the RJ controller.

Application

VEVOR-150W-PGL-C1-LED-Grow-Light-08 Set at high power of LED and high away from the plant, it covers more area. Or set to a lower power and close to the plant, it covers less but is more eco-friendly.

Photosynthesis

Output Spectrum Test Report VEVOR-150W-PGL-C1-LED-Grow-
Light-07

Electrical Parameter

Input Voltage: AC100-277V
Power Cord: Connect the plug to the power source

Application
It is professionally used for hemp/cannabis/Marijuana lighting.

Application Environment

Humidity：≤95%.
Air Pressure：90-106 Kpa

Package

1 x LED Grow Light
1 x Installation Instruction
2 x Lifting Ropes
1 x Plug
2 x Hook
2 x Stopper

Shipping and Warehousing

Please do not shake it too much during transportation, handle it carefully when unloading.
Recommended being stored in a warehouse of -10 to 60℃ and keep the warehouse dry.

Product recovery

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.