LARQ Bottle PureVis Self-Cleaning Water Bottle and Water Purification System User Manual
- June 5, 2024
- LARQ
Table of Contents
Just add water
Better water from a cleaner bottle, every time.
We are LARQ
No chemicals, no scrubbing, no compromises
LARQ ™ was started with a simple vision where innovative technology can be
combined with inspirational design to help people access pristine drinking
water easily and sustainably. We harness the power of the sun to bring that
stinky water bottle to the digital age.
You are what you drink. So Drink Brilliantly ™
Our products look as good as they make you feel. We are confident that these
are the most beautiful hydration products in the world that make it easy to
make the healthier and sustainable choices, anytime and anywhere. The
LARQ Bottle PureVis™: Beautiful from the inside out
PureVis™ technology
-
At the touch of a button, 280nm PureVis™ technology neutralizes up to 99% of bacteria*. Activate Adventure Mode for an extra dose of PureVis™.
-
USB rechargeable
Powered by a rechargeable lithium-polymer battery, one charge lasts 1-2 months** and conveniently recharges via USB. Convenient, reliable, and
simple – why can’t everything be this easy? -
Vacuum insulated stainless steel
Double-walled, electropolished stainless steel keeps your water cold for 24 hours and hot for 12. -
Intelligent activation
Turns on automatically every 2 hours to keep your bottle stink-free. Did you forget to clean again? Your LARQ Bottle didn’t!
*Based on the elimination of 99.8% of E.coli in a 20-second cycle for all LARQ Bottles.
**Estimated usage based on 3-4 cycles a day. Normal Mode lasts up to 4-8 weeks
of use and Adventure Mode lasts up to 10-12 days of use.
Getting started
Unlock LARQ, unlock cleaner water
Press and hold the button down for 5 seconds to unlock the bottle for the first
time. A white color light will flash telling you it is unlocked and ready for
PureVis™ action.
Charge up for PureVis™ power
Time to power up! Take the cap off your bottle and insert the LARQ USB cord
into the cap. Then plug the USB into any USB wall charger or laptop
USB socket until the battery is fully charged.
DO NOT charge with any other USB cable other than the USB cable provided with
your LARQ Bottle.
| Breathing green light
I’m charging!
---|---
Steady green light
I’m fully charged!
Flashing green light
Low on battery. I will flash twice before a cleansing mode.
Red pulsing light
Oh no! Something is wrong. Go to livelarq.com/warranty-claim
You’re just a few steps away from cleaner water. Get excited.
Step 1 Fill with clear water* up to the indicator line shown on the bottle
illustration.
Step 2 Screw-on cap and press the button for PureVis™ – once for Normal Mode,
twice for Adventure Mode. (Do not interrupt the PureVis™ cycle by removing the
cap or pressing the button!)
| Normal Mode
Breathing sky blue light.
---|---
Adventure Mode
Pulsing blue light.
Safety Mode (Light Sensor)
A steady orange light will turn on when activated outside the bottle.
Safety Mode (Temperature)
A pulsing orange light will flash when the liquid is too hot inside the bottle.
Step 3
While you wait, give the bottle a gentle shake or do your best water dance to
spread the PureVis™ light evenly. And voila! Enjoy better water from a cleaner
bottle. #DrinkBrilliantly
*Water should be clear with no sediments. Filter murky water before using PureVis™ with the LARQ Bottle.
What mode should I use?
Normal Mode
Drinking water from a trusted, portable source? Then press once to activate
Normal Mode (6-second cycle with a breathing sky blue light.
Adventure Mode
Need an extra dose of PureVis™ power? Press twice to activate Adventure
Mode (3-minute cycle with a pulsing blue light).
Self-Cleaning Mode
Your LARQ Bottle loves to stay clean. That’s why every 2 hours, it will
intelligently activate Self-Cleaning Mode (1-second cycle with breathing sky
blue light.
Travel Lock
Hopping across the world on your next adventure? Hold down for 5 seconds to
activate the Travel Lock. (Travel Lock disables Self-Cleaning Mode for travel
or storage.
LARQ: Part of the solution
1% for good
A million plastic bottles are bought around the world every minute. Only 7% of
those collected were turned into new bottles. Instead, most plastic bottles
end up in landfills or in the ocean.
That’s a statistic that you don’t want to be a part of. LARQ believes
technology and design have the ability to transform our planet for the better.
A portion of proceeds go to our charity partner, 1% for the Planet, to benefit
the environment and bring safe drinking water to billions.
We’re here to help
Have questions about the LARQ Bottle? Head over to livelarq.com/support for
FAQs or contact our customer support team at
hello@livelarq.com.
Love LARQ?
Us too. Share a photo of your LARQ Bottle with us and we’ll post it! @livelarq
DrinkBrilliantly
It is your responsibility to familiarize yourself with all product instructions and warnings, including, without limitation, product packaging instructions and warnings, and the online user manual.LARQ ™ (or the “product”) is properly in accordance with the instructions and warnings. Please see our website at livelarq.com for complete instructions, warnings and warranty information.
Warnings & cautions
Use the LARQ Bottle and Bottlecap according to instructions only. Improper
operation of the LARQ Bottle may cause injury. Please read and understand all
Warnings & Cautions prior to operating this Product. Do not use the LARQ
Bottle in any manner other than instructed on the product packaging or in the
User Manual.
IMPORTANT: This Product is not suitable or intended for use by children.
This product contains small parts and may otherwise be hazardous to small
children,
especially children under 3 years old. Keep Products and any dangerous
equipment, including those using batteries, out of the reach of small
children!
Caution: Ultraviolet radiation. Do not look directly at light. Direct Ultraviolet light can irritate eyes and skin or may otherwise be potentially harmful.
-
The LARQ Bottle cap should be used exclusively with the LARQ Bottle. Do not turn on or operate the LARQ Bottle cap while it is not screwed on to the LARQ Bottle.
-
For complete safety and efficacy, you should not attempt to use of the UV purification system with bottles other than the LARQ Bottle. The efficacy of the UV water purification has only been tested with the LARQ Bottle. LARQ cannot guarantee the UV’s effectiveness when used with alternative bottle designs that have not been fully tested or evaluated.
-
Never tamper with, open or alter the LARQ Bottle or Bottlecap. If the LARQ or any component of it malfunctions or fails to perform as expected, stop use immediately.
Do not open or attempt to repair the LARQ or its components. -
The UV-C light is a high voltage device. Do not open, expose, modify or touch internal circuitry as this can lead to high voltage shock. Removal or tampering with the electronic circuit board of UV-C light assembly may cause injury or damage to the user or Product and will void all warranties.
-
To prevent danger or shock hazard, keep and store this Product away from rain or liquid. Do not use the charger near water: for example, near a bathtub, washbowl, kitchen sink, laundry tub, or swimming pool.
-
Clean the outside of the Product with a clean, moist cloth. Never use any strong cleaning sprays or fluids, or similar chemicals on the Product.
-
When recharging, only connect the adaptor as described in the Product instructions or User Manual. Battery recharging should be performed by an adult. Do not charge
with any other USB cable other than the USB cable provided with your LARQ Bottle. -
Do not remove the Bottle cap while a purifying cycle is in progress. If the cap is removed during a purifying cycle without first canceling, the LARQ Bottle’s automatic safety protocols will cancel the cycle and turn off the UV-C light to avoid any harm from contact with UV light to eyes or skin.
-
To cancel a purifying cycle, first press the button on top of the cap, then safely remove the cap.
-
Do not use as a light source.
-
Do not expose the Product to temperatures below freezing or above 90°F.
-
Do not operate the cap in containers such as laboratory beakers.
-
The cap’s UV-C light is not intended to disinfect water on the lip or exterior surfaces of the Bottle where the light does not reach. It is not intended to disinfect outer
surfaces of a drinking container, i.e., those that typically contact the mouth when drinking. Be certain that the Bottle and cap have been properly cleaned prior to use. -
As with any water treatment system, you should always have a backup method available.
-
Do not allow impact to the UV-C light. If the cap or UV-C light assembly is cracked, chipped or damaged, do not operate. Contact LARQ customer service or visit
livelarq.com for more information regarding proper disposal, or to return. -
While carefully controlled microbiological testing has been conducted, the use of the cap’s UV-C light by consumers in the field may produce results that vary from laboratory test data.
Disposal (for United States-based customers only)
The LARQ Bottle cap contains a rechargeable lithium-polymer battery, and the
cap containing the battery must be disposed of properly. Do not remove the
battery. Dispose of the Product containing the battery in accordance with
applicable law. Do not dispose of the Product or battery in fire or allow any
contact with fire. Contact your local town or city officials for information
regarding the disposal of the Product containing the battery.
Disposal (for EU based customers only)
Removing the rechargeable battery only for disposal where required by law in
Europe.
The LARQ Bottle cap contains a rechargeable lithium-polymer battery that must
be disposed of properly. Do not remove the battery from the Product until you
intend to
discard of the Product. Ensure the battery is completely empty of charge
before removing it from the Product for disposal. Dispose of the battery in
accordance with applicable law.
Removing the rechargeable battery
Make sure the battery is completely empty when you remove it. Observe safety precautions when following the procedure below.
| 1. Cut a cross on the silicone cover.
---|---
2. Remove the top plastic cover.
3. Pry PCB loose.
4. Cut the wires from PCB.
5. Remove battery. DO NOT puncture the battery.
6. Tape over ends of the battery.
Disclaimer
Your use of the product is at your own risk. It is understood that you are voluntarily using it with full knowledge that there are inherent and/or associated risks in doing so, and you assume and accept any and all risks that may be associated with or that arise out of possession or use of the product, including, but not limited to, the risk of property damage or loss, and/or serious injury (including shock or death). Neither LARQ nor its retailers assume any responsibility or liability for any injuries or damages, physical or otherwise, resulting, directly or indirectly, from the use or possession of this product. LARQ reserves the right to revise this publication and to make changes from time to time in the contents thereof without the obligation to notify any person of such revision or changes. The product model may be changed for improvements without notice at any time at the discretion of LARQ. For complete information on limited product warranties, disclaimer of warranties, limitation of liability, release and indemnity, please see the LARQ website at livelarq.com.
CB:
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
CE:
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
LARQ. All rights reserved.
Designed in California. Manufactured in China.
Headquarters in Hayward, California.
livelarq.com
BDOM050A.6
References
- LARQ | Self-cleaning Water Bottle | As Seen on Shark Tank
- Product & Service FAQ | LARQ
- LARQ | My products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>