allen roth FSI 1331B BNIC Kirby 72-in to 144-in Brushed Nickel Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
ITEM # 5276626/ 5276624/ 5276627/ 5276625/
5276639/ 5276637/ 5276643/ 5276640/ 5276638/ 5276644/ 5276645/
5276647/ 5276649/ 5276646/ 5276648/ 5276650
DRAPERY ROD SET
ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC.
Allights reserved
MODEL #FSI 1201A BGLD/ FSI 1201A MBLK/ FSI 1201B BGLD/ FSI 1201B MBLK/
FSI 1331A BNIC/ FSI 1331A MBLK/ FSI 1331A DORB/ FSI 1331B BNIC/ FSI 1331B
MBLK/ FSI 1331B DORB/
FSI 6802A BGLD/ FSI 6802A BNIC/ FSI 6802A MBLK/ FSI 6802B BGLD/ FSI 6802B
BNIC/ FSI 6802B MBLK
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together.
But, if you need more information than what is provided here, please visit
Lowes.com , search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8a.m. -8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com
*Image is for example only. Appearance of actual product may vary.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Drapery rod not level | Drapery hooks not installed correctly. | Make sure to |
use level (not included) during installation.
Drapery rod hook is loose.| Drapery hooks not anchored correctly.| Attach
drapery hooks to wall studs f possible. Use anchors
and screws supplied if you can’t attach to stud.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product
Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT/CONFIANT?
* Visit lowes.com for more information.
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors.
NOTE
Anchors are not needed for all installation types. -
Attach bracket to wall using screws provided.
NOTE
Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary. -
Extend telescopic rod slightly. Remove finial from smaller diameter rod section.
-
Slide additional rod over smaller diameter rod.
NOTE
At this point you should have a complete telescopic rod with 2 large diameter rods connected with 1 smaller diameter rod section in the middle.
NOTE
Add drapery (sold separately), extend rod to desired length and hang ready rod in brackets. -
Reattach finial and tighten set screws on brackets to lock rod in place
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>