SALTO XS4 2.0 Wall Reader Installation Guide
- June 9, 2024
- SALTO
Table of Contents
SALTO XS4 2.0 Wall Reader
TOOLS
DIMENSION
INSTALLATION
Installation example CU42xx
Installation example CU42xx with RJ45
Installation example CU41xY
Installation example CU41xY with RJ45xx
Electrical characteristics
Operation conditions & Power Consumption Note 1
Operation conditions| | | Power Consumption Note 1|
---|---|---|---|---
Min| | Max| Unit|
Temperature ‐35| | 66| ºC|
Humidity 35| | 85| %|
Note 1: Installer must take this data into account to dimension the CU42xx power supply SALTO recommends to use one cable per wall reader
RF characteristics
| Min | Cen. | Max | Unit |
|---|
RFID frequency
Bluetooth Smart 2.4 frequency
| 13.56
2.445
|
2.483
| Mhz
Ghz
Cable type and max. distances
Cable type Reader
UTP Cat5e 2 pairs 100m
AWG24
UTP Cat5e 4 pairs 250m
AWG24 + SP224861/SP224895
Twisted pairs 400m
AWG18 Note 2
SIGNALLING
| Signal | Light | Time (sec) | Buzzer | Time (sec) |
|---|---|---|---|---|
| Card Rejection | Red | 1 | High pitched 50/50 | 1 |
| Privacy or emergency status | Red 5x(50/50×3+off300) | 3 | High pitched | |
| 5x(50/50×3 + off 300) | 3 | |||
| Standard opening | Green | 1 | Low pitched | 0,3 |
| Standard locking | Red | 0,5 | Low pitched | 0,2 |
| Open plus office | Green 400/200 | 2,4 | High pitched/Low pitched 400/200 | 2,4 |
| CLR Button | Orange | Cont. | High pitched | Cont. |
| Reset | Orange 50/100 | 450 msg | Low pitched 50/100 | 450 msg |
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.