FISHER PAYKEL WB24SMB1-SET Warming Drawer Minimal User Guide
- June 5, 2024
- Fisher & Paykel
Table of Contents
FISHER PAYKEL WB24SMB1-SET Warming Drawer Minimal
Product Specifications
- Model: WB24SMB1-SET, WB24SDB1-SET, WB30SDB1-SET, WB30SDX1-SET
- Power Supply: 120V AC, 60Hz
- Maximum Power: Varies by model
- Cord Length: 70 7/8 inches (1800 mm)
- Weight: Varies by model
Product Usage Instructions
Safety Instructions and Warnings
Tip Over Risk
Keep children away and ensure the drawer is fixed in place using the provided screws. A fixed shelf must be directly above the drawer if it’s not installed under another product.Cut Hazard
Be cautious as some edges may be sharp. Do not place fingers inside the drawer during closure.Electrical Shock Risk
If the product is damaged, turn off the appliance and disconnect from the power supply to prevent electrical shock.Excessive Weight Risk
Ensure the lower shelf of the cabinet can fully support the combined weight of the appliances.Installation Overview
- Verify information with the person installing the product.
- For incorrect electrical connection, have the installation performed by a Fisher & Paykel qualified technician.
- Do not install the product unless the installation site complies with the required dimensions.
- Ensure the electrical connections comply with local codes and standards.
- Perform maintenance only with a qualified technician.
Unpacking Your Product
Remove the warming drawer and the box of accessories from the packaging. Recycle the materials according to local regulations. Inspect the warming drawer to ensure there is no damage. Do not install if the product is damaged; contact your local Fisher & Paykel dealer.
Included Parts and Required Tools
Included Parts
Installation guide, user guide, and service warranty booklet.Required Tools
5 mm hex key and T20 star-shaped screwdriver.Dimensions
Product Dimensions
24 Inch Models (WB24SMB1-SET & WB24SDB1-SET)
Overall height: 5 1/2 in (140 mm), Overall width: 23 7/16 in (596 mm), Overall depth*: 22 5/16 in (567 mm), Chassis height: 5 1/2 in (140 mm), Chassis width: 21 3/8 in (543 mm), Chassis depth**: 21 9/16 in (547 mm), Front panel height: 5 3/8 in (136 mm), Front panel depth: 13/16 in (20 mm), Open drawer depth: 16 5/16 in (414 mm), Weight (including packaging): 48 lb (22 kg).30 Inch Models (WB30SDB1-SET & WB30SDX1-SET)
Overall height: 10 11/16 in (271 mm), Overall width: 29 15/16 in (761 mm), Overall depth*: 22 5/16 in (567 mm), Chassis height: 10 11/16 in (271 mm), Chassis width: 27 13/16 in (707 mm), Chassis depth**: 21 9/16 in (547 mm), Front panel height: 10 1/2 in (267 mm), Front panel depth: 13/16 in (20 mm), Open drawer depth: 16 1/2 in (419 mm), Weight (including packaging): 75 lb (34 kg).Cabinet Dimensions
24 Inch Models
Minimum interior height: 5 9/16 in (142 mm), Minimum interior width: 22 1/16 in (560 mm), Minimum interior depth: 21 5/8 in (550 mm), Overall cabinet width: 23 5/8 in (600 mm), Gap between top of front panel and upper cabinet panel: 1/8 in (3 mm), Gap between bottom of front panel and lower cabinet panel: 1/16 in (2 mm).30 Inch Models
Minimum interior height: 10 3/4 in (273 mm), Minimum interior width: 28 1/2 in (724 mm), Minimum interior depth: 22 1/16 in (560 mm), Overall cabinet width: 30 in (762 mm), Gap between top of front panel and upper cabinet panel: 1/8 in (3 mm), Gap between bottom of front panel and lower cabinet panel: 1/16 in (2 mm).Installation Options
- Single appliance installation suitable for minimal, contemporary, and professional styles.
- Combination with a simple wall oven, supporting the weight of a 30-inch oven directly on top.
- Combination with a complementary product, supporting the full weight of a 24 or 30-inch complementary appliance on top.
- Combination with a double wall oven, supporting the full weight of a double oven directly on top.
- Triple stacked combination, ensuring the bottom shelf can fully support the weight of all appliances.
Installer’s Checklist
- Ensure the drawer is level and securely fixed to the cabinets.
- Confirm all internal packaging has been removed.
- Check that the client can access the disconnection switch.
- Verify the lower shelf can fully support the combined weight of all appliances.
- Test the drawer by opening, starting the warming function, and then closing it. After 5-10 minutes, reopen to check that the internal surfaces are slightly warmed. Turn off and close the drawer.
Warranty
Refer to the warranty information in the user guide for details on service and coverage.
FAQs
What is the power supply for the product?
The product operates on 120V AC, 60Hz power supply.
What are the dimensions of the warming drawer?
The dimensions vary by model, please refer to the specific measurements provided in the user manual for accurate sizing.
What should I do if I find the warming drawer is damaged upon unpacking?
Do not install the damaged product. Contact your local Fisher & Paykel dealer for assistance.
Can I recycle the packaging of the warming drawer?
Yes, recycle the materials according to local regulations.
What are the required tools for installation?
A 5 mm hex key and a T20 star-shaped screwdriver are required for installation.
Where can I find the latest information on model availability and features?
Please visit Fisher & Paykel’s website or contact your local Fisher & Paykel retailer for the most recent information on model availability and features in your country.
The models illustrated in this guide may not be available in all countries and are subject to changes without notice. Product features presented in this guide apply to the specific models and products described at the time of publication. As part of our policy of continuous improvement, these features may be changed at any time.
For the latest information on the availability of models and features in your country, please visit Fisher & Paykel’s website or contact your local Fisher & Paykel retailer.
Document reference: 431202B 12.23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>