IMADA CW-500N Wire Clamp Grip Owner’s Manual
- October 30, 2023
- IMADA
Table of Contents
IMADA CW-500N Wire Clamp Grip
Wire Clamp Grip CW-500N
- The wedge type grip for wire/cable
- Designed to secure a sample very easily
- Self-tightening
How to install test sample
Pull up the lever to open its jaws. | Put a cable between the jaws. |
---|
|
Specifications
Model | CW-500N |
---|---|
Capacity | 500N |
Clamp method | Wedge clamp * |
Opening width | 5mm |
Size | See the Dimensions |
Weight *1 | Approx. 220g |
Mounting screws | M6 |
- It is NOT suitable for hard sample as quenched or slippery samples.
- Soft or thin-covering cable could be broken.
- CW-500N is attachable for our horizontal stands. For our vertical stands, please use GP-30.
*1 Weight of the attachment is also applied as a load on the force gauge. Consider it when selecting the capacity of a force gauge.
Examples of Product Configuration
Example 1 (*1) Code: 1C2001A
- Crimp pull test up to 500N
- Automatically pulls a crimp terminal until it breaks and measure the strength
- Versatile to fit a wide range of samples
- Easy sample setting due to horizontal design
Digital force gauge: ZTS-500N
Motorized test stand: MH2-500N
Optional attachment: CH-500N
Optional attachment: CW-500N
Optional cable: CB-528
|
---|---
Refer to the specification of each product for details.
Product configuration varies depending on the shape and characteristic of the sample, and measurement conditions.
*The recommended capacity of force gauge varies depending on the expected force to be loaded.
Mountable Force Gauges
Digital force gauge
DST/DSV series| Digital force gauge
ZTS/ZTA series| Mechanical force gauge
FB/PS/PSM series
---|---|---
- Affordable model
- Easy data management on PC
|
- High sampling speed
- High functionality
- High precision
|
- Easy Handling
| | ~~~~
*Select suitable force gauge to correspond with the mounting screws of attachment.
Related Products
Terminal clamp jig
CH-500N| High capacity wire clamp jig
CW-5000N| Loop Tensile test fixture
LOP-1000N
---|---|---
It secures a crimp terminal.| It secures a wire in capacity up to 5000N.| It
is designed for tensile test of PP band in capacity up to 1000N.
| |
Automatic crimp tester
ACT-1000N| Test stand for crimp pull test
LH-500N
It tests tensile strength of a wire crimp terminal automatically. A supplied
software enables data management and test condition setting very easily.| You
can easily handle it due to simple lever operation. It comes with optional
attachments.
|
[Dimensions]
[Cautions]
- Specifications are subject to change without prior notice.
- A force gauge (sold separately) is required to use this product.
- This product is designed for force testing only. Do not use it for any other purposes.
- Some samples may not be suitable to grip with this product.
- Do not copy and use this content without authorization.
IMADA CO., LTD
99 Jinnoshinden-cho aza Kanowari Toyohashi
Japan 441-8077
Tel: +81-(0)532-33-3288
Fax: +81-(0)532-33-3866
E-mail: info@forcegauge.net
Website: https://www.forcegauge.net/en/
Visit our website for more information on wide product specifications, measurement applications and videos.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>