Uixe SSL-15763 1-Light 12 in.Black Cylinder Outdoor Wall Light Modern Metal Stream Sconce Instruction Manual

Uixe SSL-15763 1-Light 12 in.Black Cylinder Outdoor Wall Light Modern

Metal Stream Sconce

Product Information: Light Fixture

The light fixture comes with all the necessary hardware for assembly and installation. The product package includes a fixture, mounting unit, rubber rings, ball nuts, mounting screws, wire nuts, and wire strippers. Please note that the parts shown in the manual may differ slightly per light fixture. For installation, you will need a ladder, safety glasses, electrical Phillips screwdriver, flat blade screwdriver, pliers, and electrical tape. Additionally, you may need to remove the fuse at the fuse box before starting the installation.

Assembly Instructions

CAUTION

• Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
• Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or b removing the fuse at the fuse box.

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

Step 1: Mounting Unit Installation

1. Unscrew the rubber rings and ball nuts from the mounting unit.
2. Use the mounting screws to attach the mounting unit to the junction box (not included).
3. Attach the fixture to the mounting unit through screw holes as shown and secure it with rubber rings and ball nuts.

Step 2: Electrical Connection

Make the electrical connection from the junction box to the fixture using the following wires:

• Black or Red wire (hot) from the junction box
• White wire (neutral) from the junction box
• Bare or Green ground wire from the junction box

Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative, and ground wires with the supplied wire nuts. Secure with electrical tape.

Step 3: Sealing

Please use caulk in the backplate and wall mounting surface to prevent water from entering.

Note: Sealing tape is not included in the product package.

Caution

Please use caution when assembling and installing the light fixture. Make sure to follow the instructions carefully and use the required tools. Always wear safety glasses when working with electrical components. Additionally, if necessary, remove the fuse at the fuse box before starting the installation.

TOOLS REQUIRED

HARDWARE INCLUDED

EXPLODED PARTS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>