QFX E-1500 Professional Large Bluetooth Speakers User Manual
- June 6, 2024
- QFX
Table of Contents
**QFX E-1500 Professional Large Bluetooth Speakers User Manual
**
Definitions
MODE: The MODE button allows you to toggle through and select the speaker
functions of your choice: Bluetooth, USB, SD Card, AUX, FM Radio.
**: Press the Loop button to loop the current .mp3 track, play list, or
shuffle. : Press to play or pause the selected .mp3 track. Press and hold
down the button for TWS Sync TWS.
**: Press to select the previous .mp3 track. In FM MODE, use this button to
select the previous FM radio station..
: Press to select the next mp3 track. In FM MODE, use this button to
select the next FM radio station.
FM Radio: Frequency-Modulated stations operate in a frequency band
extending from 87.8 MHz to 108 MHz.
MIC.PRIORTY: Press the MIC.PRIORTY button to prioritize the microphone
over the music.
TRS: Tip, Ring, Sleeve: A 3.5mm or 6.35mm balanced audio connector.
Carries 2 balanced mono signals. Also known as 1/8″ and 1/4″.
TS: Tip, Sleeve: A 3.5mm or 6.35mm unbalanced audio cable. Also known as
1/8″ and 1/4″.
Instrument Cable: Unbalanced 6.35mm audio cable.
RCA: An Audio/Video connection type: Radio Corporation of America (RCA).
HDMI: High-Definition Multimedia Interface: Transmits digital audio and
video signals.
MP3: Compressed audio file typically 1/10th of a broadcast .wav file.
MPEG Audio Layer-3.
EQ: Equalizer: Use the EQ to boost or cut audio frequencies to shape the
sound. LED: Light Emitting Diode: A semiconductor diode which glows when a
voltage is applied.
RGB: Light color values: Red, Green, Blue.
USB: Universal Serial Bus: Used to transport digital information between
digital components.
TF Card: TransFlash card is used to carry digital information. Also known
as a Micro SD Card.
STEP SETUP GUIDE
Step l: Find the AC power cord to the E-1500 located on the back panel of
the unit.
Step 2: Find a power outlet (AC 120V/60Hz) and connect the AC cord to the
socket to supply the unit with power.
Step 3: Move to the top panel and set the POWER switch to the “ON”
position. The display sc een should turn on. The E-1500 should now be ready to
play music. If the Display doesn’t turn on. try a different power source.
Step 4: On the back panel next to the RCA inputs, there is a LED. LIGHT
switch. Set the switch to the “ON” position. Check the front side for of the
E-1500 for flashing party lights.
Step 5: Insert a USB flash drive or SD card into the corresponding port,
found directly under the display screen, to play your .mp3 content, The E-1500
will automatically read the .mp3 files when inserted.
Step 6: The MASTER VOLUME will increase and decrease the entire volume
evenly. Make sure that the L and R Channel Knobs are turned to max before
gradually raising the MASTER VOLUME.
E-1500 BLUETOOTH
Bluetooth Mode: Use the MODE button to enable Bluetooth on the E-1500. Open
the Bluetooth settings on your mobile device and search for OFX E-1500. Select
the option to pair both devices together. You can now sit back and enjoy the
music from your favorite app. You won’t need reconnect the Bluetooth again
when switching through modes.
E-1500 FM RADIO:
FM Radio: Frequency-Modulated stations operate in a frequency band extending
from 87.5 MHz to 108 MHz. Use the MODE button to select the FM mode. In FM
mode, press and hold the Play/Pause button to scan available frequencies in
the area. Extend the telescoping antenna to enhance reception.
Control Panel
- POWER: ON/OFF switch.
- MIC.BASS & TREBLE: Boost or cut the bass and treble EQ on the microphone.
- MIC.VOL: Turn the Knob to set the Microphone levels.
- MIC INPUTS: 6.35mm (TS) microphone inputs. Connect up to 3 microphones.
- MASTER VOL: Spin the wheel to increase and decrease the Master Volume.
- MODE: Toggle through modes: USB/SD/LINE (AUX)/BLUETOOTH/FM MODE
- X-BASS CONTROL: Boost the X-Bass to increase the Bass.
- MIC.DELAY & ECHO: Increase and decrease the amount of Echo and Delay for a spatial effect.
- AUX INPUT: Insert a 3.5MM (TRS) from an external audio device for playback.
- 6-BAND GRAPHIC EQUALIZER: Increase and decrease selected frequencies to shape the overall sound
- DISPLAY USB/TF/SD CARD Ports: Find the current mode information on the Display Screen. Below, insert a USB, TF Card, or SD Card to playback .mp3 music.
GLOBAL FUNCTIONS
MODE: The MODE button allows you to toggle through and select the speaker
functions of your choice: Bluetooth, USB. SD Card, AUX, FM Radio.
: Press to play or pause the selected .mp3 track. Press and hold down the
button for TWS Sync (See TWS Connection instructions).
: Press to select the previous .mp3 track. In FM Mode, use this button to
select the previous FM radio station.
: Press to select the next .mp3 track. In FM Mode, use this button to
select the next FM radio station
ROUTING AUDIO
E-1500 BACK PANEL
- LED Light: LED ON/OFF light switch.
- RCA Input: RCA inputs.
- Antenna: Telescoping Antenna.
- AC Power: 110-220V, 60/50Hz input switch.
- Fuse: 110 VF10/AC – 220VF8A/AC 6. Antenna: Telescoping Antenna.
RCA Input:
Use the RCA inputs on the back panel of the E-1500 to connect an external line level audio device to the unit. The E-1500 can be used to amplify the sound of the external audio unit. Use an RCA cable or a 1/8″ (3.5mm) TRS cable to RCA. A few examples of external audio devices are, DVD player, TV, Tablets, PC computers, AND vinyl record players
REMOTE CONTROL and TWS
Stand By: Enable standby mode.
Mode: Toggle between USE VC/ SD. FM, LINE. BT
Stop: Stop current track.
Mute: Mute the volume of the entire speaker.
RPT: Repeat the playing track
EQ: Enable EQ presets
Rewind: Select previous track or FM channel
Forward: Select next track or EM channel
Play/Pause: Play or Pause current track
VOLO +: Increase the master volume
VOL -:
Decrease the master volume
Number
Keys:0-9 Number Keys:
TWS CONNECTION
TWS connection: TWS Connection is only for two speakers of the same make and model.
- Enable Bluetooth: Turn on both speakers and set them to BLUETOOTH mode.
- TWS Sync: On one unit press and hold the PlaylPause (TWS) button for 3 seconds. The speaker will play a sound and the screen will read ‘UST’. The other unit will display BT.
- Mobile Device: Open the Bluetooth settings on your mobile device and search for QFX E-1500. Select the option to pair both devices.
- Music Playback: Select music from the phone and enjoy True Wireless Stereo.
- Exit TWS: Press and hold the PlaylPausel(TWS) button for 3 seconds to exit the TWS function.
SAFETY MEASURES
IMPORTANT SAFETY MEASURES
Before using this machine, please read all the safety and operating
instructions. These safety and operating instructions should be kept in
condition of consultation.
- Electric Power Supply Line: Keep the power cord safe from being trampled on, pressed on by heavy objects, or pierced. Make sure that the cord has ample space to rest on the ground and is not stressed. DO NOT pull or drag or the power supply line.
- Ventilation: This unit must be set in a ventilated space. DO NOT cover the vents on the back panel for any reason. If placed alongside a wall, distance the unit a minimum of 10cm to allow air flow. DO NOT surface that might restricted good air flow.
- Dismantling: DO NOT dismantle or open the unit. This is a high-powered unit that can cause serious harm if tampered with. DO NOT Open.
- Smoke: Please unplug the power supplies cord from the wall outlet immediately if unusual smoke appears and contact customer support
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER.
THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED
TECHNICIAN
To prevent fire or electric shock, do not expose this equipment to rain or
moisture. Do not store or operate this product near any liquids, heat sources
such as radiators, heat registers or under extreme weather conditions. Clean
only with a dry cloth. Users should exhibit extra safety when the WARNING or
CAUTION symbol appears in this instruction manual and follow all precautions
as they are stated.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>