BIOGENESIS 6 Kg Powder FIRE Extinguisher User Manual
- June 12, 2024
- BIOGENESIS
Table of Contents
BIOGENESIS 6 Kg Powder FIRE Extinguisher User Manual
Instruction
-
CYLINDER
Stainless steel AISI 304, 3 pieces drawing, with clip, polished. -
EXTINGUISHING AGENT
ABC powder – MAP 20 % -
PROPELLANT
Dehumidified air or N2 . -
VALVE
M. 58×2, lightweight aluminum alloy AA6061 body, with external check valve, black painting. -
USE
A B C fire rating (solid materials, flammable liquids, flammable gas). -
BRACKET
Wall-mounted for valve, in standard equipment.
Clip Detail
Note: image is for illustrative purpose only, the product purchased can has some differences
6 Kg powder fire extinguisher, temperature range from -30°C to +60°C,
manufactured in accordance to EN 3-7, certified according to the directive for
pressure equipment PED 2014/68/EU.
Quality Product certification guaranteed by Bureau Veritas Italia.
Suitable for use on fire involving electrical voltages up to 1.
000 V, at a distance of 1 mt.
Fire Rating
TECHNICAL SPECIFICATIONS
| FIRE RATING | 34 A 233 B C |
|---|---|
| EXTINGUISHING AGENT | EPW 18462ABC powder – MAP 20 % |
| PROPELLANT | Dehumidified air or N2 ,15 Bar at 20°C |
| TEMPERATURE RANGE | -30°C / +60°C |
| NOMINAL CHARGE | 6 Kg |
| FULL WEIGHT | ~ 8,8 Kg |
| DIMENSIONS | Height 560 mmDiameter 160 mm |
| DISCHARGE TIME | 18,5 sec. |
| VALVE TIGHTENING TORQUE | Minimum 40 Nm, Maximum 60 Nm |
| CYLINDER PRESSURE TEST | PT 27 bar |
| CYLINDER VOLUME | 7,8 L. |
| SAFETY VALVE | Set between 22 and 27 bar |
| CYLINDER MATERIAL | Stainless steel AISI 304 |
| EXTERNAL/INTERNAL TREATMENT | Polishing |
PACKAGING
STANDARD : maximum 100 pieces for pallet (44 pieces for box, max 2 boxes
for pallet) (12 pieces in single packaging)
Pallet dimensions 100x120x160(h) cm
SINGLE PACKAGING ON REQUEST:
- maximum 64 pieces on pallet 100×120 cm
- maximum 48 pieces on pallet 80×120 cm
Note: the packaging quantities and measurements are indicative and can be subject at changes
MAINTENANCE AND INSTALLATION
For outdoor or marine installation is recommended to protect the fire extinguisher with cover or box. Maintenance according to the rules in use in utilization country
SPARE PARTS
NUMBER| DESCRIPTION|
---|---|---
1| Valve M. 58×2|
2| Cylinder|
3| PVC dip tube|
4| Label|
5| Hose|
6| Safety pin|
7| PELD base|
| Safety valve|
| Safety pin seal|
| Check valve|
| ABC powder – MAP 20 % (6 Kg recharge)|
OPTIONAL| Wall-mounted bracket for fire extinguisher with clip, red painting|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>