BIOGENESIS 2L Foam Portable Fire Extinguisher User Manual

BIOGENESIS 2L Foam Portable Fire Extinguisher

Product Information

The Portable Fire Extinguisher, 2 L Foam is a high-quality product suitable for use in putting out fires. It is certified according to the directive for pressure equipment PED 2014/68/EU. The product is approved/certified by Bureau on fire involving electrical voltages. It has a fire rating of AB F 13 55 25 and a nominal charge of ~3.9 Kg (with bracket). The extinguishing agent used is foam, and the propellant temperature range is set between 20 and 26 bar. The product comes with a safety device and safety pin for safe and easy usage. The cylinder material is made of alloy steel and has been sandblasted and powder painted red Ral 3000 colour with plastic coating for external/internal treatment. The product comes with a packaging standard of minimum 8 pieces, with a maximum of 256 pieces for pallet (32 boxes with 8 pieces for each one).

2 L foam fire extinguisher, temperature range from 0°C to +60°C, manufactured in accordance to UNI EN 3-7, (D.M. 7.1.2005), certified according to the directive for pressure equipment PED 2014/68/EU. Quality Product certification guaranteed by Bureau Veritas Italia. Suitable for use on fire involving electrical voltages up to 1.000 V, at a minimum distance of 1 meter.

FEATURES

• CYLINDER
  In high-strength alloy steel, deep drawing, external powder painting Red Ral

• EXTINGUISHING AGENT
  Water-based foam.
  PROPELLANT
  Dehumidified air or nitrogen (N2).

• VALVE
  M. 30×1.5, brass body, levers with red painting Ral 3000.

• USE
  A B F fire rating (solid materials, flammable liquids, cooking oils).

Product Usage Instructions

Using the Portable Fire Extinguisher, 2 L Foam is easy. Follow the instructions below:

1. Remove the safety pin from the extinguisher.
2. Aim the nozzle at the base of the fire.
3. Squeeze the lever slowly to release the foam extinguishing agent.
4. Sweep the nozzle from side to side until the fire is completely out.
5. After use, dispose of the product according to the transport disposal guidelines mentioned in the user manual.

Note: The product image in the user manual is for illustrative purposes only. The actual product purchased may have some differences. For any spare parts or components, refer to the components and spare parts list table in the user manual. Reproduction of any content from the user manual is prohibited.

TECHNICAL SPECIFICATIONS

mm
DISCHARGE TIME| ~ 10,5 seconds
VALVE TIGHTENING TORQUE| Minimum 45 Nm, Maximum 68 Nm
CYLINDER PRESSURE TEST| PT 27 bar
CYLINDER VOLUME| 2,4 L.
SAFETY DEVICE| Set between 20 and 26 bar
CYLINDER MATERIAL| Alloy steel
EXTERNAL /INTERNAL TREATMENT| Sandblast and powder painting, Red Ral 3000 colour / Plastic coating

PACKAGING

( Note: the packaging quantities and measurements are indicative and can be subject at changes)

STANDARD
Note: minimum 8 pieces
Maximum nr. 256 pieces for pallet (32 boxes with 8 pieces for each one) Pallet dimensions 100×120 cm

ON REQUEST: SINGLE PACKAGING – maximum 192 pieces on pallet 100×120

TRANSPORT DISPOSAL

• Land transport: Exemption for the purposes of ADR disposal 594
• Ship Transport: IMDG Code – UN 1044 class 2.2 Fire Extinguishers

COMPONENTS AND SPARE PARTS LIST

NUM.| DESCRIPTION|
---|---|---
1| Valve M. 30×1.5|
1.1| O-ring valve|
1.2| Valve stem|
1.3| Internal spring of the valve|
1.4| Tamper seal (red)|
1.5| Test valve for pressure gauge|
1.6| Dip tube holder|
1.7| Safety device|
1.8| Safety pin|
NUM.| DESCRIPTION|
---|---|---
1.9| Dispensing horn|
2| Safety pin seal (green)|
3| PVC dip tube|
4| Cylinder|
5| Pressure gauge|
6| Bracket|
7| Label|
 | Foam refill (1 L. bottle, ready to use)|

The spare part at number 1 includes already all others components indicated from 1.1 to 1.9 “n.a.” mean that the component is not available as single spare part

www.bio-genesis.it

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>