BIOGENESIS BGPOWPORKG6SIS31 Portable Fire Extinguisher User Manual
- June 10, 2024
- BIOGENESIS
Table of Contents
BIOGENESIS BGPOWPORKG6SIS31 Portable Fire Extinguisher
Product Information
The Biogenesis S.r.l. Portable Fire Extinguisher is a 6 Kg ABC Powder fire extinguisher. This product has been approved/certified for use in fire emergencies with a fire rating of ABC 34 233. The extinguishing agent used is powder, and the propellant temperature range is set between 22 and 27 bar. The nominal charge full weight is approximately 9.4 Kg, and the dimensions of the product are height (base – valve) 505 +/- 5 mm and diameter (cylinder) 160 +/- 2 mm. The discharge time is around 22 seconds, and the valve tightening torque should be set between a minimum of 35 Nm and a maximum of 55 Nm. The cylinder pressure test is PT 27 bar, and the cylinder volume is 7.3 L. The safety device used is a pressure gauge, and the cylinder material is alloy steel. The external treatment of the product is sandblast and powder painting with a red Ral 3000 color.
Product Usage
The Biogenesis S.r.l. Portable Fire Extinguisher should be used in case of fire emergencies. To use the product, follow these instructions:
- Remove the safety pin from the product by pulling it out.
- Aim the nozzle at the base of the fire.
- Squeeze the lever or handle to discharge the powder extinguishing agent.
- Sweep the nozzle from side to side until the fire is completely out.
After using the product, it is recommended to get it refilled or replaced immediately. Please note that reproduction of any part of the user manual or instructions is strictly prohibited.
INFORMATION
- CYLINDER
- In high-strength alloy steel, 3 pieces drawing, external powder painting Red Ral 3000.
- EXTINGUISHING AGENT
- ABC Powder – MAP 20 %.
- PROPELLANT
- Dehumidified air or nitrogen (N2).
- VALVE
- M. 30×1.5, lightweight aluminum alloy AA6061 body, levers with red painting Ral 3000.
- USE
- A B C fire rating (solid materials, flammable liquids, flammable gas).
Note: image is for illustrative purpose only, the product purchased can has some difference 6 Kg powder fire extinguisher, temperature range from -30°C to +60°C, manufactured in accordance to UNI EN 3-7,(D.M. 7.1.2005), approved Marine Equipment Directive MED 2014/90/EU, certified according to the directive for pressure equipment PED 2014/68/EU.
Quality Product certification guaranteed by Bureau Veritas Italia.
Suitable for use on fire involving electrical voltages up to 1.000 V, at a
distance of 1 meter.
TECHNICAL SPECIFICATIONS
| FIRE RATING | 34 A 233 B C |
|---|---|
| EXTINGUISHING AGENT | ABC Powder – MAP 20 % EPW 18462 (ABC Favorit Tertia – |
Rühl)
PROPELLANT| Dehumidified air or Nitrogen (N2), 15 bar at 20°C
TEMPERATURE RANGE| -30°C / +60°C
NOMINAL CHARGE| 6 Kg
FULL WEIGHT| ~ 9,4 Kg
DIMENSIONS| Height (base – valve) 505 +/- 5 mm
Diameter (cylinder) 160 +/- 2 mm
DISCHARGE TIME| ~ 22 seconds
VALVE TIGHTENING TORQUE| Minimum 35 Nm, Maximum 55 Nm
CYLINDER PRESSURE TEST| PT 27 bar
CYLINDER VOLUME| 7,3 L.
SAFETY DEVICE| Set between 22 and 27 bar
CYLINDER MATERIAL| Alloy steel
EXTERNAL TREATMENT| Sandblast and powder painting,
Red Ral 3000 colour
PACKAGING
(Note: the packaging quantities and measurements are indicative and can be subject at changes)
STANDARD
Maximum nr. 100 pieces for pallet (44 pieces for box, max 2 boxes for
pallet)(12 pieces. single packaging ) Pallet dimensions 100x120x160(h) cm
ON REQUEST: SINGLE PACKAGING
- maximum 64 pieces on pallet 100×120
- maximum 48 pieces on pallet 80×120
TRANSPORT DISPOSAL
- Land transport: Exemption for the purposes of ADR disposal 594
- Ship Transport: IMDG Code – UN 1044 class 2.2 Fire Extinguishers
COMPONENTS AND SPARE PARTS LIST
Table 1
| NUM. | DESCRIPTION |
|---|---|
| 1 | Valve M. 30×1.5 |
| 1.1 | O-ring valve |
| 1.2 | Valve stem |
| 1.3 | Internal spring of the valve |
| 1.4 | Rubber link (red) |
| 1.5 | Test valve for pressure gauge |
| 1.6 | Dip tube holder |
| 1.7 | Safety device |
| 1.8 | Safety pin |
| 2 | Pressure gauge |
| 3 | Safety pin seal (green) |
| --- | --- |
| 4 | PVC dip tube |
| 5 | Cylinder |
| 6 | Hose |
| 7 | Label |
| OPTIONAL | Iron marine bracket red painting |
| OPTIONAL | Stainless steel marine bracket |
The spare part at number 1 includes already all others components indicated from 1.1 to 1.8 “n.a.” mean that the component is not available as single spare part
QR SCAN
Biogenesis S.r.l. www.bio-genesis.it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>