BIOGENESIS BGCO2PORKG2SIS113 2 Kg Portable CO2 Fire Extinguisher User Manual
- October 30, 2023
- BIOGENESIS
Table of Contents
BGCO2PORKG2SIS113 2 Kg Portable CO2 Fire Extinguisher
User Manual User and Maintenance Manual
BGCO2PORKG2SIS113 2 Kg Portable CO2 Fire Extinguisher
Biogenesis S.r.l. www.bio-genesis.it
2 Kg Portable CO2 Fire Extinguisher
-
CYLINDER
Alloy steel, epoxypolyestere powder painting, Red Ral 3000. -
EXTINGUISHING AGENT
Carbon Dioxide 99,99% -
VALVE
CPF M. 25×2, brass body, levers with red painting Ral 3000. -
USE
B fire rating (flammable liquids).
REPRODUCTION IS PROHIBITED
Note: image is for illustrative purpose only, the product purchased can have
some differences
2 Kg CO2 fire extinguisher, temperature range from -30°C to +60°C,
manufactured in accordance to UNI EN 3-7
(D.M. 7.1.2005), approved Marine Equipment Directive MED 2014/90/EU, certified
according to the directive for pressure equipment PED 2014/68/EU.
Quality Product certification guaranteed by Bureau Veritas Italia.
Suitable for use on fire involving electrical voltages up to 1.000 V, at a
distance of 1 mt
TECHNICAL SPECIFICATIONS
| FIRE RATING | 34 B |
|---|---|
| EXTINGUISHING AGENT | Carbon Dioxide 99,99 % (CO2) |
| TEMPERATURE RANGE | -30°C / +60°C |
| NOMINAL CHARGE | 2 Kg |
| FULL WEIGHT | ~ 7,2 Kg |
| DIMENSIONS | Height (base – valve) 570 +/- 10 mm |
Diameter (cylinder) 104 +/- 2 mm
DISCHARGE TIME| ~ 7,7 seconds
MODALITY OF USE
- REMOVE SAFETY PIN| 2) SQUEEZE GRIP LEVER| 3) AIM THE JET AT BASE OF FIRE
Follow the instructions present on the marking label.
ATTENTION: Do not direct the jet at people. If you’re dispensing in close
spaces, then ventilate the room.
The fire extinguisher can be used on fire involving electrical voltages up to
1.000 V, at a distance of 1 meter.
INSTALLATION AND COMMISSIONING
The installation of the extinguisher must be performed according to the rules
in force.
The extinguisher have to be installed in a safe and stable support, with a
gripping at a maximum height of 110 cm. The fire extinguisher must be free of
obstructions and marked by an appropriate identifying label.
It is recommended to install it in a dry place, protected from the atmospheric
agents.
It is recommended the installation of water-based extinguishers for close
spaces. The commissioning of the fire extinguisher for the protection of the
area must be carried out by qualifiedpersonnel according to the rule in force
within 6 months from the date of
production and/or placing on the market,reported in the declaration of
conformity released by the producer.
MAINTENANCE PERIODS FOR EFFICIENCY GUARANTEES
The maintaning of the product efficiency have to be carried out from the
responsible person.
It is recommended a visual check of the efficiency state every three months
since the commissioning time apart if there are different dispositions.
It is advisable to : verify that the extinguisher would be in a well-balanced,
safety and impediment-freed position ; identify the extinguisher with an
appropriate identification sign; make sure of its structural integrity and
that is free from any damage; check that the original documentations is
available.
Any restoration operations and instrumental checking have to be realized
exclusively by qualified personnel who possess the necessary documentations to
mantain the constancy of the product performance.
Any tampering or intromission by unauthorized personnel voids the product
warranty.
APPROVED\CERTIFIED FIRE EXTINGUISHER: FIRE RATING :
Documents / Resources
|
BIOGENESIS BGCO2PORKG2SIS113 2 Kg Portable CO2 Fire
Extinguisher
[pdf] User Manual
BGCO2PORKG2SIS113 2 Kg Portable CO2 Fire Extinguisher, BGCO2PORKG2SIS113, 2 Kg
Portable CO2 Fire Extinguisher, Portable CO2 Fire Extinguisher, CO2 Fire
Extinguisher, Fire Extinguisher, Extinguisher
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>