BIOGENESIS Ral 3000 50 Kg Carbon Dioxide Wheeled Fire Extinguisher User Manual

BIOGENESIS Ral 3000 50 Kg Carbon Dioxide Wheeled Fire Extinguisher

Product Information

The Biogenesis S.r.l. Wheeled Fire Extinguisher is a quality product that is suitable for use in emergencies involving electrical voltages. It has a fire rating of B 233 and uses carbon dioxide as the extinguishing agent. The product is certified according to the directive for pressure equipment PED 2014/68/EU and is approved/certified by the Bureau on Fire. The dimensions of the fire extinguisher are Height 1270 +/-5 mm, Width 1425 +/-5 mm, and Depth 580 +/-5 mm. The nominal charge and full weight of the product are not specified. The fire extinguisher has a discharge time of approximately 48.9 seconds.

Product Usage Instructions

1. Unroll the hose.
2. Remove the safety pin.
3. Open the valve.
4. Hold the nozzle, move the lever, and aim the jet at the base of the fire.

Follow the instructions present on the marking label. It is important not to direct the jet towards any person or animal, and to keep a minimum distance of 1 meter from the fire. If the fire is electrical, ensure that the power source is turned off before using the fire extinguisher. Once the fire is extinguished, it is recommended to ventilate the room before re-entering.

Installation and Maintenance

The installation and commissioning of the fire extinguisher should be carried out according to local regulations. The product should be periodically maintained to ensure its efficiency during emergencies. Maintenance periods are not specified in the user manual.

Note: Reproduction of any part of the user manual is prohibited.

Wheeled Fire Extinguisher, 50 Kg Carbon Dioxide

• CYLINDER: Alloy steel, external powder coating, color Red Ral 3000.
• EXTINGUISHING AGENT: Carbon Dioxide 99,99 % (CO2).
• VALVE: W 28.8, brass body, handwheel red painting, with protection for a valve.
• USE: B fire rating (flammable liquids).
• BRACKET: Chassis on wheels, red painting Ral 3000.

Note: image is for illustrative purposes only, the product purchased can have some differences.

50 Kg carbon dioxide wheeled fire extinguisher, temperature range from -30°C to +60°C, manufactured in accordance with UNI EN 1866-1 (D.M. 6.3.92), certified according to the directive for pressure equipment PED 2014/68/EU. Quality Product certification is guaranteed by Bureau Veritas Italia. Suitable for use on fire involving electrical voltages up to 1.000 V, at a minimum distance of 1 mt.

TECHNICAL SPECIFICATIONS

Depth 580 +/-5 mm

DISCHARGE TIME| ~ 48,9 seconds

MODALITY OF USE

1. UNROLL THE HOSE.
2. REMOVE THE SAFETY PIN.
3. OPEN THE VALVE.
4. HOLD THE NOZZLE, MOVE THE LEVER, AND AIM THE JET AT THE BASE OF THE FIR.

Follow the instructions present on the marking label.
ATTENTION: Do not direct the jet at people. If you’re dispensing in close spaces, then ventilate the room.
The fire extinguisher can be used on fire involving electrical voltages up to 1.000 V, at a distance of 1 meter.

INSTALLATION AND COMMISSIONING

• The installation of the fire extinguisher must be performed according to the rules in force.
• The fire extinguisher has to be installed in areas with large spaces and free from obstacles.
• The fire extinguisher must be free of obstructions and marked by an appropriate identifying label.
• It is recommended to install it in a dry place, protected from atmospheric agents.
• It is recommended the installation of water-based fire extinguishers for close spaces.
• The commissioning of the fire extinguisher for the protection of the area must be carried out by qualified personnel according to the rule in force within 6 months from the date of production and/or placing on the market, reported in the declaration of conformity released by the producer.

MAINTENANCE PERIODS FOR EFFICIENCY GUARANTEES

• The maintenance of product efficiency has to be carried out by the responsible person.
• It is recommended a visual check of the efficiency state every three months from the commissioning time apart if there are different dispositions.
• It is advisable to: verify that the fire extinguisher would be in the correct position, safe and stable, and free from impediment for use; identify the fire extinguisher with an appropriate identification sign; make sure of its structural integrity and that is free from any damage; check that the original documentations are available.
• Any restoration operations and instrumental checking have to be realized exclusively by qualified personnel who possess the necessary documentation to maintain the constancy of the product performance.
• Any tampering or intromission by unauthorized personnel voids the product warranty.

Biogenesis S.r.l. www.bio-genesis.it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>