BIOGENESIS BGPOWPORKG2SIS39 Portable Fire Extinguisher User Manual
- October 30, 2023
- BIOGENESIS
Table of Contents
BIOGENESIS BGPOWPORKG2SIS39 Portable Fire Extinguisher
Information
2 Kg powder fire extinguisher, temperature range from -30°C to +60°C, manufactured in accordance to UNI EN 3-7, (D.M. 7.1.2005), approved Marine Equipment Directive MED 2014/90/EU, certified according to the directive for pressure equipment PED 2014/68/EU. Quality Product certification guaranteed by Bureau Veritas Italia. Suitable for use on fire involving electrical voltages up to 1.000 V, at a distance of 1 meter.
- CYLINDER
In high-strength alloy steel, deep drawing, external powder painting Red Ral
-
EXTINGUISHING AGENT
ABC Powder – MAP 20 %. -
PROPELLANT
Dehumidified air or nitrogen (N2). -
VALVE
M. 30×1.5, brass body, levers with red painting Ral 3000. -
USE
A B C fire rating (solid materials, flammable liquids, flammable gas).
Product Usage Instructions
- Locate the fire extinguisher in a place that is easily accessible and visible in case of an emergency.
- To activate the fire extinguisher, pull out the safety pin located on the top of the cylinder.
- Aim the nozzle towards the base of the fire.
- Squeeze the handle to release the ABC powder extinguishing agent onto the fire.
- Sweep the nozzle from side to side to ensure the fire is completely extinguished.
- After use, replace the safety pin and have the fire extinguisher recharged by a professional.
Note: This product is approved/certified for ABC fire rating and should only be used for fires involving Class A (wood, paper, cloth, etc.), Class B (flammable liquids), and Class C (electrical) materials. Do not use on fires involving Class D (metal) or Class K (cooking oils and fats) materials.
PACKAGING
( Note: the packaging quantities and measurements are indicative and can be subject at changes)
STANDARD
Note: minimum 8 pieces
Maximum nr. 256 pieces for pallet (32 boxes with 8 pieces for each one) Pallet
dimensions 100×120 cm
ON REQUEST: SINGLE PACKAGING – maximum 192 pieces on pallet 100×120
TRANSPORT DISPOSAL
- Land transport: Exemption for the purposes of ADR disposal 594
- Ship Transport: IMDG Code – UN 1044 class 2.2 Fire Extinguishers
COMPONENTS AND SPARE PARTS LIST
NUM.| DESCRIPTION|
---|---|---
1| Valve M. 30×1.5|
1.1| O-ring valve|
1.2| Valve stem|
1.3| Internal spring of the valve|
1.4| Tamper seal (red)|
1.5| Test valve for pressure gauge|
1.6| Dip tube holder|
1.7| Safety device|
1.8| Safety pin|
NUM.| DESCRIPTION|
---|---|---
1.9| Dispensing nozzle|
2| Safety pin seal (green)|
3| PVC dip tube|
4| Cylinder|
5| Pressure gauge|
6| Bracket|
7| Label|
The spare part at number 1 includes already all others components indicated from 1.1 to 1.9 “n.a.” mean that the component is not available as single spare part.
TECHNICAL SPECIFICATIONS
| FIRE RATING | 13 A 89 B C |
|---|---|
| EXTINGUISHING AGENT | ABC Powder – MAP 20 % EPW 18462 (ABC Favorit Tertia – |
Rühl)
PROPELLANT| Dehumidified air or Nitrogen (N2), 15 bar at 20°C
TEMPERATURE RANGE| -30°C / +60°C
NOMINAL CHARGE| 2 Kg
FULL WEIGHT| ~ 3,7 Kg
DIMENSIONS| Height (base – valve) 380 +/- 5 mm
Diameter (cylinder) 110 +/- 2 mm
DISCHARGE TIME| ~ 13,3 seconds
VALVE TIGHTENING TORQUE| Minimum 45 Nm, Maximum 68 Nm
CYLINDER PRESSURE TEST| PT 27 bar
CYLINDER VOLUME| 2,5 L.
SAFETY DEVICE| Set between 20 and 26 bar
CYLINDER MATERIAL| Alloy steel
EXTERNAL TREATMENT| Sandblast and powder painting,
Red Ral 3000 colour
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>