ORION 22180 Dispenser for Draining and Refilling Oil User Manual

ORION 22180 Dispenser for Draining and Refilling Oil

Product Information

28645
Description| Equipment for collecting e.g. hydraulic oil and refilling the
same liquid after the service is completed. Consists of drum
trolley, an empty 208 l plastic drum, air operated diaphragm pump,
outlet hose with control valve, suction hose with suction strainer
and an additional filter before the pump.

Product Usage Instructions

Note: Ensure to follow the instructions provided in the product manual for safe and proper usage.

1. To drain oil from a container:
   • Place the suction hose in the container to be drained.
   • Connect air to the pump.
   • Adjust the speed of the pump using the needle valve.
2. To refill oil in the provided drum:
   • Connect air to the pump.
   • Fill the fluid in the provided drum using the oil valve.
3. To refill oil in a vehicle’s reservoir:
   • Place the suction hose in the provided drum.
   • Connect air to the pump.
   • Fill the fluid in the vehicle’s reservoir using the oil valve.
4. Cleaning the filter:
   • If the speed of filling decreases, the filters should be disassembled and cleaned.
   • Unscrew the strainer on the bottom valve (3) and clean it.
   • Reassemble and continue with the suction filter fitted to the pump (4).
   • Unscrew the bottom of the filter and remove the filter insert and clean.
   • Reassemble in reverse order.
5. Pump maintenance:
   Refer to the pump manual for proper maintenance instructions.

Declaration of Conformity

• Krister Tynhage, Managing Director
• Olle Berglund, Product Manager

GENERAL

Equipment for collecting e.g. hydraulic oil and refilling the same liquid after the service is completed. Consists of drum trolley, an empty 208 l plastic drum, air operated diaphragm pump, outlet hose with control valve, suction hose with suction strainer and an additional filter before the pump.

OPERATION

• Emptying the vehicle’s container – FIG 1
  Place the suction hose in the container to be drained. Connect air to the pump. Fill the fluid in the provided drum using the oil valve. Adjust the speed of the pump using the needle valve.

• Return to vehicle container – FIG 2
  Place the suction hose in the provided drum. Connect air to the pump. Fill the fluid in the vehicle’s reservoir using the oil valve.

CLEANING THE FILTER

If the speed of filling decreases, the filters should be disassembled and cleaned. Unscrew the strainer on the bottom valve (3) and clean it. Reassemble and continue with the suction filter fitted to the pump (4). Unscrew the bottom of the filter and remove the filter insert and clean. Reassemble in reverse order.

PUMP MAINTENANCE

For pump maintenance, see the pump manual.

SGPEANREER APAL R/ TASL

PART NO.| DESCRIPTION| POS.| QUANTITY

---|---|---|---
7350007| 208 l plastic drum with level indicator| 1| 1
20377| Outlet valve with manual non-drip| 2| 1
2346064| Foot valve with strainer| 3| 1
28272| Suction hose 2,5 m x 3/4”| 4| 1
29310| Suction strainer 550 µm| 5| 1
28513| Needle valve 1/4”| 6| 1
22310| Air operated diaphragm pump| 7| 1
28010| Outlet hose 3 m x 1/2”| 8| 1
28645| Drum trolley| 9| 1

DECLARATION OF CONFORMITY

Alentec&Orion AB, Grustagsvägen 4, SE-13840, Älta, Sweden, declares by the present certificate that the mentioned machinery is in conformity with the EC Directive (2006/42/EC)

ABOUT COMPANY

• Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN
• info@alentec.se
• www.alentec.com

References

• Alentec & Orion AB

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>