OYFNZI WiFi Extenders Signal Booster User Guide

OYFNZI WiFi Extenders Signal Booster

TIPS : Please make sure that the host router is turned on and able to access the internet before setting it.

METHOD #1

WEB Management Page

Step 1
Plug the extender into an electrical outlet next to your router, and then wait until the 2.4G and 5G LED lights turn solid on.

Step 2
Connect your smartphone or computer to the extender’s network wifi-2.4G-Xxxx or wifi-5.8G-xx (wifi-5.8G-xx is recommended).

Step 3
The phone automatically launches a web browser and then enters the page step 4. (If step4 does not appear, please Launch a web browser and input 192.168.188. in the address bar.)

Step 4
Click on the name of the WiFi network you want to extend, e.g. Host Network ‘ If your host network does not appear, please refresh it several times.

Step 5
Enter the WIFI password of your HOST Network into the password box. Click the “Next” button.

Step 6
Create a new Wireless Name(SSID) and Wireless password for your Extender or keep them as the default.

(The default wireless name is “Host Network -PRO-2.4G* and “Host Network -PRO -5.8G” the password is the same as your Host Network )

Step 7
After confirming the wireless information, click “start to connect”

Step 8
Observe the Extender LED light, if the light is solid Green, the Extender is working now

Step 9

Enjoy !
Connect your devices to the extender wirelessly or via an Ethernet cable, then enter the internet.

METHOD #2

WPS Button

Use this way if your router has a WPS button a

Step 1
Plug the extender into an electrical outlet next to your router, and then wait until the 2.4G and 5G LED lights turn solid on.

Step 2
Press the WPS button for 1 second on your host router

(Note: For more information about using the WPS button on your host router, please refer to the router manufacturer’s user guide.)

Step 3
Press the WPS button on the Extender for a second within 2 minutes.

Step 4
After 60 seconds, a new wireless name(SSID) will appear, and the new SSID default is
Host network -Pro-2.4G” and
Host network -Pro-5.8G’

The new networks have the same password as your host Network.

Step 5
Relocate your extender for optimal Wi-Fi coverage and performance.

1. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your host router.
2. Wait for about 2 minutes until the Repeater LED turns solid green. If it doesn’t relocate the extender closer to the router to achieve better signal quality.

Enjoy!
Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the internet.

Get J
When the steps are complete, your Extender automatically reboots. Place it in the best location for better service ( halfway between your router and the Poor signal area.

Put the extender in the middle between your router and the dead zone you want to extend.

FOA

Q1. What should I do if I can’t access the web management page of the range extender?

1. Verify that 192.168.188.1 is correctly entered in the web browser.
2. Make sure your smartphone or computer is connected to the extender’s Wi-Fi. The default network name is wifi-X, and you can connect your computer to the extender via an Ethernet cable, then try again.
3. If you use a computer, make sure it is configured to obtain an IP address automatically.
4. Reboot the extender and try again.
5. Use the IP address to access the extender. The default IP is 192.168.188.1 If the extender has been connected to a router, go to the router’s DHCP client list to obtain the extender’s current IP address.

02. How far should the Extender be from the router?
It should be between the router and the area with a low signal. The position must be able to receive a good WiFi signal from the router.

What should I do if the Repeater LED doesn’t turn solid on after completing the setup?

1. You may have entered an incorrect Wi-Fi password for your host router during the configuration. Check the password and try again.
2. Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
3. If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
4. Try setting it up via the WPS button.
5. Reset the extender and go through the configuration again

04. How do reset the extender?
With the extender powered on, press the WPS button for 10 seconds The extender will be rebooted.

Q5. Why does the internet speed drop when connected to the extender?

1. The WiFi Extender is used to extend the range of your WiFi (Which your main router WiFi cover can’t cover). It does not increase internet speed
2. Sometimes, the signal(Coverage or speed) drops due to external influences-a microwave oven, nearby cell towers nearby, a neighbor’s WiFi on the same channel, walls, and so on
3. Try the Extender in different positions, place it at different angles or locations for a better signal.

Q6. What should I do if my range extender has no internet connection?
The extender relies on your router for internet connection.

If it loses an internet connection, check the following:

• Connect your smartphone to your router to check whether it has internet connection.
• Make sure the extender is within the range of your router.
• Move the extender closer to your router and check again.
• Double-check whether your router’s wireless network name(s) and passwords) have been changed.
• If yes, login to the extender and go to wireless settings to reconnect to your router.

Frequently Asked Questions

Can this wif extender work on all routers?

Yes, this amplifier works with any traditional wifi router. This wifi extenders signal booster for home is the best range extender for wifi router and it can bring you a different experience.

How do you reset the device without wps? I followed to set up instructions in the user guide but that’s not working. I have a new router.

There is a reset button on the left side near the bottom. It is very difficult to see. It will set it back to the factory.

Yes, it has an Ethernet wire for in and out.

Can I set-up more than one of these in my home?

Yes, you can since they are repeaters.

Can i set a different password for the booster than the one i have for my original wifi?

As far as I understand you can set up different passwords for both 2.4 and 5G.

How do you put it in ap mode?

When you reset the extender it has several modes that will pop up on your phone when you try to connect it for the first time. I believe it's an option you can pick from modes after the reset like bridging it is an option too.

Will this help with Ring outdoor camera connectivity?

Yes. Plug it in an outlet near the doorbell camera.

Does this work with echo show?

I am not sure. I put it in my garage to use for my alarm cameras on the outside. I didn’t try to hook it to my echo.

Can this be used in an outbuilding that is not heated?

Yes, we have it on the outside under cover, now the lowest temp we have gotten to is 24.

Were can you install product?

You install it near your router for your internet service and it expands greatly the reception area. We are in an RV 75 FT from the house and internet connection. We get great connection and receptivity.

Video

Download this PDF Link:OYFNZI WiFi Extenders Signal Booster User Guide

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>