KECOOLKE SU-777 Ultrasound Cleaner User Manual
- June 15, 2024
- KECOOLKE
Table of Contents
KECOOLKE SU-777 Ultrasound Cleaner
Please read this manual carefully before operating the machine
WARNING (3mm high) -To reduce the risk of electrocution:
- Always unplug this product immediately after using.
- Do not use while bathing.
- Do not use the device without water to avoid damage.
- Do not place the device in wet environment.
- Do not reach for a product that has fallen into water. Unplug immediately.
- Never operate this product if it has a damaged cord or plug.
- Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- After the device has been working continuously for 3 times. please stop for at least 5 minutes before restarting.
- This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and above and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years. Children shall not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
PARTS DESCRIPTION
- A. Housing
- B. Cleaning Basin
- C. Lid
- D. Switch
- E. Power cord
- F. Blue Interior light
- G. Basket
- H. Watch holder
- I. CD Rack
- J. LED Display
Specification:
APPLIED ITEMS (EXAMPLES OF USE)
- Jewelry: necklaces, rings, earrings, bracelets, watch chains, etc.
- Metal items: watch/clock components, coins, medals, badges, valves, parts of devices, etc.
- Writing materials: pen nibs, ballpoint pen sleeves, printer nozzles, signature stamps, etc
- Hygiene items: toothbrushes, false teeth, braces, etc.
The following items are not suitable for ultrasonic cleaning: wood, real
pearls, leather goods, clock/watch mechanisms.
OPERATION INSTRUCTION
- Open the lid of the device and place the object into the cleaning container, and then fill with water. (The water should cover the object but not exceed the MAX mark) Running without water can damage the unit
- Close the lid. Plug in unit to electric outlet, the LED timer will be flashing in two seconds.
- Press power button and timer button (to choose different working time, which will be shown from 180s-300s-480s-600s-90s), please press ON button to start cleaning after you select a cleaning time.
- After the selected cleaning time (180s/300s/480s/600s/90s), the product automatically stops. For another cleaning cycle, just repeat above process. However, we recommend that you wait for at least 5 minutes after 3 consecutive cleaning cycles before restarting the machine.)
- After the cleaning has been finished, Please turn off the unit and unplug the unit. Open the lid and remove the cleaned object from the device.
- After the cleaning finished, unplug the device, take out the cleaned items, and pour out the water.
Timer settina with 5 different time control
Three cleaning methods (in different situations)
-
General Cleaning
Use just simple water for general cleaning (the water should cover the item but not exceed the Max mark) -
Enhanced Cleaning
For special cleaning, add a few drops of cleaning liquid to enhance cleaning. -
Partial Cleaning
To clean parts of large items, the device can be used with the lid open, as shown in the picture.
How to clean watch strap/ jewelry/ CD/VCD disk
Watch strap cleaning:
You can use the watch shelf for cleaning metal watch straps. First, simply fix
the watch strap onto the watch shelf, with the watch part face up; second, put
the watch shelf into the container which is filled with water.
Jewelry cleaning:
First, put the jewelry into the basket; second, put the basket into the
container which is filled with water. After cleaning, take out the basket and
dry the jewelry with clean dry cloth. The jewelry can restore to a aleamina
finish.
CD/VCD disk cleaning
There are 2 disk mats, which you can clean 2 disks at most per time. Hitch the
disk with disk mat, then fasten the mat with the basket on its central hole.
After cleaning, take out the disk and dry it…
If you feel that the cleaning effect is not satisfactory, it may be that the
surface of the cleaning item is covered with oil stains or oxides. The
following is a detailed description of cleaning such products. To clean
stubborn oil stains and loose oxides on the surface (such as rust), you can
appropriately increase the cleaning time/number of times; you can also add
alkaline or weak alkaline cleaning agents to assist cleaning in the cleaning
process. For particularly stubborn greasy dirt, you can apply detergent on the
surface of the greasy dirt, and then put it on the ultrasonic machine that has
added detergent for cleaning. For cleaning silver jewelry, you can add a weak
alkaline/neutral detergent during the cleaning process. After cleaning, wipe
it with a dry cloth to give the jewelry a new look. Note: Mixed cleaning
agents are risky, please do not mix cleaning agents. Please follow the
instructions of the cleaning agent for the specific usage method of the
cleaning agent. Commonly used cleaning agents: professional ultrasonic
cleaning agent, daily chemical weak alkaline cleaning agent (such as
detergent, washing powder, shower gel, etc.), daily chemical neutral cleaning
agent (such as neutral detergent); Cleaning agent used: industrial detergent
(caustic soda), industrial rust remover, industrial degreaser.
Remarks: When using industrial cleaning agents, please strictly follow
the instructions of the cleaning agent to avoid injury.
MAINTENANCE
- Do not clean the ultrasonic cleaner with harsh cleaning products or sharp objects.
- Keep the device in a cool, dry place, well out of reach of children.
- Do not leave water in the cleaning container. Empty immediately after each use. Wipe the cleaning container with towel. Avoid washing the complete unit with water to reduce the risk of electrocution.
PROBLEMS AND REMEDIES
Warranty Information
The warranty will not apply in case of:
- Normal wear and tear
- Incorrect use, e.g. overloading of the appliance, use of non-approved accessories
- Use of force, damage caused by external influences
- Damage caused by non-observance of the user manual, connection to an unsuitable mains supply or non-compliance with the installation instructions
- Partially or completely dismantled appliances
Correct Disposal of this product
This marking indicates that this product should not be disposable with
other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resource. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
eVatmaster Consulting GmbH
Bettinastr. 30,60325 Frankfurt am Main, Germany
contact@evatmaster.com
+496995179070
Manufacturer: Shenzhen QJ Supply Chain Co., Ltd.
Address: Room 1108, Hubei Baofeng Building,1 054 South Baoan Road,
Guiyuan Street, Luohu District, Shenzhen CHINA 518000
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>