motogadget mo.view Spiegel Race Mirror Instruction Manual
- June 12, 2024
- motogadget
Table of Contents
mo.view Spiegel Race Mirror
**Instruction Manual
**
Operating Instructions for mo.view mirrors
Thank you very much for choosing a high quality product from motogadget. All
products produced by our company are designed and manufactured in Berlin,
Germany.
Our mo.view mirrors are unique. They are made from one piece of aluminum and
are unbreakable, super thin, frameless and many times lighter than
conventional glass mirrors. The lower weight reduces the vibrations of the
mirror and thus significantly improves the view.
The reflecting surface is milled directly into the aluminum housing by diamond
cutting tools and then coated with a wafer-thin, glassy layer of silicon
dioxide (SiO2). This coating is UV, weather and chemical and abrasion
resistant.
Important note for handling metal mirrors
Even if the coating ensures abrasion resistance, metal mirrors are more
sensitive than glass mirrors. Contact with hard objects can damage the mirror
surface. Therefore, the protective film must remain on the mirror during
installation. The film may only be removed after it has been attached to the
handlebar. Metal objects such as jacket zips, helmet locks, watch straps,
rings, rivets, keys, vehicle parts etc.
can damage the mirror surface. Cleaning the mirror with water, soap and a soft
cloth only. Do not use abrasive cleaning agents or hard objects.
Assembly of the mirror types CLASSIC / CLUB / SPORT / RACE
Part of delivery are 3 screws: M10x1.5 / M10x1.25 (one groove at head) and M10x1.25 left-hand thread (two grooves at head). Grease the thread of the M10 screw well before mounting. After aligning the mirror, the M10 screw is tightened with a torque of 20Nm and the M6 screw in the mirror arm with a torque of 8Nm. Specific screws for installation on Harley Davidson armatures are available at www.motogadget.com
Assembly of the mirror types FLIGHT / CAFE / ROAD / BLADE / SPY
After aligning the mirror, the M5 clamping screw inside the arm is tightened
with a torque of 4Nm. Vehicle specific handlebar extensions for mounting the
mirrors without changing handle positions are available at
www.motogadget.com.
Important! The mirror arms are made of anodized aluminum. The high-
quality surface is ceramic-like and very hard, but can still be worn away by
permanent friction contact with gloves. Select the installation location so
that your gloves cannot come into contact with the mirror arms.
Assembly of the mirror types STREET / CRUISE / PACE
The orientation of the mirror must be above the handlebars. The vertical
distance between ball head and clamp must be 40mm. After aligning the mirror,
the M6 clamping screw in the arm is tightened with a torque of 3Nm.
We hope you enjoy the new rear-view mirrors and look forward to your positive
review. Should you ever be unsatisfied, please give us the opportunity to
correct it and contact us directly.
We take care of this. service@motogadget.de
Bolt-On & Ride
Assembly of the mo.view mirror with handlebar clamp without relocating the
handle positions on the handlebars.
compatible mirrors:
mo.view spy / blade / flight / cafe / road / street / cruise / pace
|
---|---
Mirror with cover on universal handlebar
Inner diameter 12mm – 21mm
no internal thread
free, inner handlebar length: 30mm article no. 7001072| Mirror with mo.blaze
disc / cone
on universal handlebar
Inner diameter 12mm – 21mm
no internal thread
free, inner handlebar length: 95mm
article no. 7001061
|
Mirror with cover on standard
BMW handlebar
article no. 7001062
Other vehicle models on
motogadget.com| Mirror with mo.blaze disc / cone
on standard BMW handlebar
article no. 7001063
Other vehicle models on
motogadget.com
References
- motogadget - parts for perfection
- motogadget - parts for perfection
- motogadget - parts for perfection
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>