GRUNDIG GSB 910 S All-In-One Soundbar User Manual

: June 5, 2024
: GRUNDIG

Table of Contents

SAFETY AND SET-UP
AT A GLANCE
PREPARATIONS
PLACEMENT AND MOUNTING
CONNECTIONS
- Use the HDMI (ARC) Socket
- Connect Power
BASIC OPERATION
BLUETOOTH OPERATION
- Listen to Music from Bluetooth
USB OPERATION
TROUBLESHOOTING
SPECIFICATIONS
INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

All-In-One Soundbar
User Manual
GSB 910 S – DSB 970
01M-GSS1030-5220-03
01M-GSS1040-5220-03
01M-8870491600-5220-03

| MOUNTING
---|---
| CONNECTIONS
| OPERATION
| BLUETOOTH
| USB

SAFETY AND SET-UP

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to person.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Safety:

Read these instructions – All the safety and operating instructions should be read before this product is operated.
Keep these instructions – The safety and operating instructions should be retained for future reference.
Heed all warnings – All warnings on the appli- ance and in the operating instructions should be adhered to.
Follow all instructions – All operating and usage instructions should be followed.
Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool and the like
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to the electrical earth.
The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
The minimum distance around the apparatus for sufficient ventilation is 5cm.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc…
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Batteries should be recycled or disposed of as per state and local guidelines.
The use of apparatus in moderate or tropical climates.

Caution:

Use of controls or adjustments or performance of procedures other than those described herein may result in hazardous radiation exposure or other unsafe operation.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus.
The mains plug/appliance coupler is used as the disconnect device, the disconnect device must remain readily operable.
The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

Warning

The battery (batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire, or the like.
Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
Do not place this unit close to strong magnetic fields.
Do not place this unit on the amplifier or receiver.
Do not place this unit close to damp areas as the moisture will affect the life of the laser head.
If any solid object or liquid falls into the system, unplug the system and have it checked by qualified personnel before operating it any further.
Do not attempt to clean the unit with chemical solvents as this may damage the finish. Use a clean, dry, or slightly damp cloth.
When removing the power plug from the wall out-let, always pull directly on the plug, never yank on the cord.
Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equip- ment.
The rating label is pasted on the bottom or back of the equipment.

Battery usage CAUTION
To prevent battery leakage which may result in bodily injury, property damage, or damage to the apparatus:

Install all batteries correctly, + and – as marked on the apparatus.
Do not mix old and new batteries.
Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
Remove batteries when the unit is not used for a long time.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

AT A GLANCE

Dear Customer,
Congratulations on the purchase of your new GRUNDIG All-In-One-Soundbar GSB 910 S/DSB 970.
Please read the following user notes carefully to ensure full enjoyment of your quality GRUNDIG product for many years to come.

A responsible approach!
GRUNDIG focuses on contractually agreed social working conditions with fair wages for both internal employees and suppliers. We also attach great importance to the efficient use of raw materials with continuous waste reduction of several tonnes of plastic every year. Furthermore, all our accessories are available for at least 5 years.
For a future worth living.
Grundig.

Controls and parts
See the figure on page 3.
A Main Unit

LED-Indicator
Remote Control Sensor
-Button
Buttons +/5.AC Socket
OPTICAL Socket
USB Socket
AUX Socket
HDMI ARC Socket
Wall bracket screws

B Remote Control

**** Switch the unit between ON and STANDBY mode.
Select the play function.
+/- Increase/decrease the volume level.
REP In USB mode: Select repeat/shuffle play modes.
EQ Select Equalizer (EQ) Effect.
Mute or resume the sound.
Skip to previous/next track in BT/USB mode.
Play/pause/resume playback in BT/ USB mode.

C AC Power Cord
D Audio Cabel
E Optical Cable
F Wall Bracket Screws/Gum Cover
G AAA Batteries x2

PREPARATIONS

Prepare the Remote Control

The provided Remote Control allows the unit to be operated from a distance.
Even if the Remote Control is operated within the effective range of 19.7 feet (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control.
If the Remote Control is operated near other products which generate infrared rays, or if other remote control devices using infra-red rays are used near the unit, it may operate incorrectly.
Conversely, the other products may operate incorrectly.

Precautions Concerning Batteries

Be sure to insert the batteries with the correct positive
“+ ” and negative “ – ” polarities.
Use batteries of the same type. Never use different types of batteries together.
Either rechargeable or non-rechargeable batteries can be used. Refer to the precautions on their labels.
Be aware of your fingernails when removing the
battery cover and the battery.
Do not drop the remote control.
Do not allow anything to impact the remote control.
Do not spill water or any liquid on the remote control.
Do not place the remote control on a wet object.
Do not place the remote control under direct sunlight or near sources of excessive heat.
Remove the battery from the remote control when not in use for a long period of time, like corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire.
Do not use any batteries other than those specified.
Do not mix new batteries with old ones.
Never recharge a battery unless it is confirmed to be a rechargeable type.

PLACEMENT AND MOUNTING

Normal Placement (place Soundbar on the leveled surface in front of the TV)
Wall Mounting (Option-B)

Note:

Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage (if you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the installer’s responsibility to verify that the wall will safely support the total load of the unit and wall brackets.
Additional tools (not included) are required for the installation.
Do not overtighten screws.
Keep this instruction manual for future reference.

CONNECTIONS

Use the HDMI (ARC) Socket

ARC (Audio Return Channel)

The ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to your soundbar through a single HDMI connection.
To enjoy the ARC function, please ensure your TV is both HDMI-CEC and ARC compliant and set up accordingly. When correctly set up, you can use your TV remote control to adjust the volume output (VOL +/- and MUTE) of the soundbar.
Connect the HDMI cable (not included) from the unit’s HDMI (ARC) socket to the HDMI (ARC) socket on your ARC-compliant TV. Then press the remote control to select HDMI ARC mode.

Note:

Your TV must support the HDMI-CEC and ARC and the HDMI-CEC and ARC must be set to On.
The setting method of HDMI-CEC and ARC may dier depend on the TV. For details about ARCfunction, please refer to the owner’s manual.
Ensure that you use HDMI cables that can support the ARC function.
HDMI-CEC will be called different names by different manufacturers – please refer to your owner’s manual for details on setting up HDMI-CEC andARC.

Use the OPTICAL Socket

Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (included) to the TV’s OPTICAL OUT socket and the OPTICAL socket on the unit.
Tip: While in HDMI ARC, OPTICAL mode, if there’s no sound output from the unit and the status indicator flashes quickly, you may need to activate PCM signal output on your source device (eg. TV, DVD, or Blu-ray player).

Use the AUX Socket
A. Use a 3.5mm to 3.5mm audio cable (included) to connect the TVs or external audio device headphone socket to the AUX socket on the unit.
B. Use an RCA to 3.5mm audio cable (not included) to connect the TV’s audio output sockets to the AUX socket on the unit.

Connect Power

Risk of product damage!

Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
Before connecting the AC power cord, ensure you have completed all other connections.
Connect the mains plug of the main unit to a mains socket.
Note:
If there is no power, ensure the power cord and plug are fully inserted and the power is turned on.

BASIC OPERATION

Select Equalizer (EQ) Effect

While playing, press the MOVIE / MUSIC / NEWS buttons on the remote control to select MOVIE / MUSIC / NEWS desired preset equalizers: MOVIE (recommended for viewing movies), MUSIC (recommended for listening to music), NEWS (recommended for listening to NEWS).

BLUETOOTH OPERATION

Tips:

Enter „0000“ for the password if necessary.
If no other Bluetooth device pairs with this player within two minutes, the player will recover its previous connection.
The player will also be disconnected when your device is moved beyond the operational range.
If you want to reconnect your device to this player, place it within the operational range.
If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player.
If the connection is lost, follow the instructions above to pair your device to the player again.

Listen to Music from Bluetooth

Device

If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the player.
If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player‘s remote control to play music stored on the device.
1 Pair your device with the player.
2 Play music via your device (if it supports A2DP).
3 Use supplied remote control to control play (if it supports AVRCP).
To pause/resume play, press the » « button on the remote control.
To skip to the previous/next track, press the buttons on the remote control or press and hold the VOL+/VOL- buttons on the unit.

USB OPERATION

Select Repeat/Random Play Options
During play, press the REP button on the remote control repeatedly to select a REPEAT/SHUFFLE option play mode.
Repeat one: Green LED indicator flash twice
Repeat folder: Blue LED indicator flashes twice (if there are multiple folders)
Repeat all: Orange LED indicator flash twice
Shuffle Play: White LED indicator flashes twice
Repeat off: Green/Blue/Orange/White LED indicators flash twice together

Tips:

The unit can support USB devices with up to 64 GB of memory.
This unit can play MP3.
The USB file system should be FAT32 or FLAT16

TROUBLESHOOTING

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service.

No power

Ensure that the AC cord of the apparatus is properly connected.
Ensure that there is power at the AC outlet.
Press the standby button to turn the unit on.

Remote control does not work

Before you press any playback control button, first select the correct source.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit.

I can’t find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing

Ensure the Bluetooth function is activated on your Bluetooth device.
Ensure you have paired the unit with your Bluetooth device.

This is 15 mins power-off function, one of the ERPII standard requirements for saving power

When the unit’s external input signal level is too low, the unit will be turned off automatically in 15 minutes. Please increase the volume level of your external device.

SPECIFICATIONS

Soundbar
Power Supply ………………………………………………………………………………………………………….AC 220-240V~ 50/60Hz
Power Consumption ……………………………………………………………………………………………….. 25W / < 0.5 W (Standby)
Total maximum power …………………………………………………………………………………………………………………………120W
Frequency Response ………………………………………………………………………………………………………………. 60Hz – 20KHz
Impedance ………………………………………………………………………………………………………………………….. 8 Ω x 2+ 4 Ω
Total harmonic distortion ………………………………………………………………………………………………………….1% (1kHz, 1W)
Audio input sensitivity ………………………………………………………………………………………………………………………..250mV
Dimension (W x H x D) …………………………………………………………………………………………………….1000 x 60 x 113 mm
Net Weight………………………………………………………………………………………………………………………………………..2.9 kg
USB port for playback ……………………………………………………………………………………………………………….5V 500mA
USB Compatibility ……………………………………………………………………………………………………………..Hi-Speed USB (2.0)
USB Playback support/file formats ………………………………………………………………………………………… 64G (max), MP3

Bluetooth
Specification …………………………………………………………………………………………………………………………… A2DP, AVRCP
Version……………………………………………………………………………………………………………………………………………..V 4.2
Maximum power transmitted ……………………………………………………………………………………………………………….5 dBm
Frequency bands ………………………………………………………………………………………………………. 2402 MHz ~ 2480 MHz

Remote Control
Distance ………………………………………………………………………………………………………………………………………………6m
Angle…………………………………………………………………………………………………… …………………………………………… 30°
Battery type …………………………………………………………………………………………………………………………..AAA (1.5V X 2)

Design and specifications are subject to change without notice.

INFORMATION

Compliance with the WEEE Directive and Disposing of the Waste Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This symbol indicates that this product shall not be disposed of with other household wastes at the end of its service life. Used devices must be returned to an official collection point for the recycling of electrical and electronic devices. To find these collection systems please contact your local authorities or the retailer where the product was purchased. Each household performs an important role in recovering and recycling old appliances. Appropriate disposal of used appliances helps prevent potential negative consequences for the environment and human health.

Compliance with RoHS Directive
The product you have purchased complies with the EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Technical data
This device is noise-suppressed according to the applicable EU directives.
This product fulfills the European directives 2014/53/ EU, 2009/125/EC, and 2011/65/EU.
Never open the device casing. The manufacturer will not accept any liability for damage resulting from improper handling.
You can find the CE declaration of conformity for the device in the form of a pdf file on the Grundig Homepage at www.grundig.com/downloads/doc.
The type plate is located on the bottom of the device

Beko Grundig Deutschland GmbH
Thomas-Edison-Platz 3
D-63263 Neu-Isenburg
www.grundig.com