motogadget 7001015 Glassless Rear Mirror Instruction Manual
- June 1, 2024
- motogadget
Table of Contents
motogadget 7001015 Glassless Rear Mirror
Specifications
- Product Name: mo. view glassless rear mirror
- Version: V1.0
- Manufacturer: motogadget GmbH
- Material: Aluminum
- Coating: Silicon Dioxide (SiO2)
- Weight: Lightweight
- Resistance: UV, weather, chemical, and abrasion resistant
Product Usage Instructions
1. Review of Delivery
Upon receiving the product, ensure it is in perfect condition and has not been damaged during transit. Contact customer service immediately if any issues are found.
2. Exclusion of Liability
Read and adhere to the operating and installation guide to avoid damage or defects for which motogadget GmbH is not liable.
3. Features
The mo. view mirrors are frameless, lightweight, and made from a single piece of aluminium. The reflective surface is coated with silicon dioxide for durability and clarity.
4. Handling Glassless Mirrors
- Avoid contact with hard objects to prevent damage to the mirror surface.
- Keep the protective film on the mirror during installation and remove it only after attaching it to the handlebar.
- Avoid contact with metal objects that can scratch the mirror surface.
- Clean the mirror using water, soap, and a soft cloth. Do not use abrasive cleaners or hard objects.
5. Vibrations
Handlebar vibrations can affect visibility and mirror stability. Ensure proper handlebar configuration to minimize vibrations and potential issues.
Frequently Asked Questions
- Q: Can I use abrasive cleaners on the glassless mirrors?
- A: No, it is recommended to clean the mirror using water, soap, and a soft cloth to avoid damaging the surface.
- Q: How should I handle vibrations in the grip area?
- A: Ensure proper handlebar configuration and consider adding handlebar weights if strong vibrations occur, which can affect visibility and mirror stability.
Thank you very much for purchasing a high-quality Moto gadget product. Made in Germany. Please read the following information and recommendations thoroughly and follow these instructions during installation and use of the product. No liability shall be assumed by the Moto gadget for damage or defects resulting from negligence or failure to follow the operating and installation guide.
Review of Delivery
Every moto gadget product is delivered in perfect working order. Please check that the goods you receive have not been damaged in transit. If there is any damage or the packaging has been opened, please contact us immediately. Our general terms and conditions apply. If a return is agreed with us, please ensure that we only accept goods in their original packaging and without signs of use within the statutory periods. We accept no liability for returns that are inadequately insured or packaged.
Exclusion of Liability
THE DEVICE AND ITS ACCESSORIES MUST BE INSTALLED BY A CERTIFIED MOTORCYCLE TECHNICAN AND IN AN AUTHORIZED SERVICE CENTER. MOTOGADGET ACCEPTS NO LIABILITY FOR DIRECT OR INDIRECT DAMAGE OR SUBSEQUENT DAMAGE OF ANY KIND RESULTING FROM THE USE, INSTALLATION OR CONNECTION OF THE DEVICE OR OTHER DELIVERED EQUIPMENT. THIS EXCLUSION OF LIABILITY PARTICULARLY INCLUDES DAMAGE TO PERSONS, MATERIAL LOSSES AND FINANCIAL DAMAGES. THE USE IN AREAS OF PUBLIC TRAFFIC ENSUES AT THE USER’S OWN RISK. THE USE OF THE DELIVERED DEVICE AND ITS ACCESSORIES FOR RACING OR OTHER COMPETITIONS AS WELL AS FOR ANY USE NOT CORRESPONDING TO THE RECOMMENDED APPLICATION ALL WARRANTY CLAIMS SHALL BE INVALID
Features
moto gadget mo. view mirrors are unique. They are made from one piece of aluminium and are unbreakable, super thin, frameless and many times lighter than conventional glass mirrors. The lower weight reduces the vibrations of the mirror and thus significantly improves the view. The reflecting surface is milled directly into the aluminium body by diamond cutting tools and then coated with a wafer-thin, glassy layer of silicon dioxide (SiO2). This coating is UV, weather and chemical and abrasion resistant. An object viewed in a glass mirror was reflected two times. First time at the glas surface and the second time in the reflective coating at the bottom side of the glass plate. This is causing a slight unsharp image. Because an object viewed in a metal mirror is reflected only once, the visible image is sharper and appears clearer.
Handling glassless mirrors
Despite the coating ensures abrasion resistance, glassless mirrors are more sensitive than glass mirrors. Contact with hard objects may damage the mirror surface. The protective fi lm must remain on the mirror during installation. The fi lm may only be removed after the attachment to the handlebar is done. Metal objects such as jacket zips, helmet buckles, watch straps, rings, rivets, keys, vehicle parts etc. can damage the mirror surface. Do not put your helmet on the mirrors, the metal helmet buckle may scratch the mirror surface. Cleaning the mirror with water, soap and a soft cloth only. Do not use abrasive cleaning agents or hard objects.
Vibrations
The handlebars are stimulated to vibrate by motor vibrations. Changing the handlebar confi guration, i.e. changing the weight, particularly at the end of the handlebars, can lead to an increase in vibrations in the grip area. Permanent, strong vibrations in the grip area can lead to numbness in the hands, reduced visibility in the rear-view mirror or even breakage of the mirror arm. If strong vibrations occur in the grip area after removing handlebar end caps, grips, shortening the handlebars, etc., handlebar weights are required to reduce these vibrations
Installation
Part of the delivery are 3 screws: M10x1.5 / M10x1.25 (one groove at head) and M10x1.25 left-hand thread (two grooves at head). Grease the thread of the M10 screw well before mounting. After aligning the mirror, the M10 screw is tightened with a torque of 20Nm and the M6 screw in the mirror arm with a torque of 8Nm
After aligning the mirror, the M5 clamping screw inside the arm is tightened with a torque of 4Nm. The mirror arms are made of anodized aluminium. The high-quality surface is ceramic-like and very hard, but can still be worn away by permanent friction contact with gloves. Select a mirror location so that your gloves cannot come into contact with the mirror arms
The orientation of the mirror must be above the handlebars and the vertical
distance between the ball head and clamp must be 40mm. After aligning the
mirror, the M6 clamping screw in the arm is tightened with a torque of
3Nm
After aligning the mirror, the M5 clamping screw in the arm is tightened with a torque of 3Nm
We hope you enjoy your new rearview mirrors and look forward to your positive review. Should you ever be unsatisfied, please give us the chance to correct it and contact us directly at service@motogadget.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>