motogadget mo.can OBD Digital Adapter Instruction Manual
- June 12, 2024
- motogadget
Table of Contents
Instruction manual mo.can OBD
Exclusion of liability
DE VICE HOUS INGS AND ALL OTHER DELIVERED PARTS MUST NOT BE OPENED OR
DISMANTLED. IN CAS E OF NONCOMPLIANCE ALL GUARANTEE CLAIMS BECOME INVALID.
THE MO.CAN CAN ONLY US E D WITH MOTOGADGE TINSTRUMENTS. THE US E WITH OTHER
INSTRUMENTS WILL DAMAGE THE MO.CAN OB D; ALL GUARANTEE CLAIMS BECOME INVALID.
THEREFORE A CHANGE OF A DE FE CT MO.CAN OBD IS ONLY POS S IB LE IF THE US E D
MOTOGADGET INSTRUMENT WILL BE SEND TOGETHER WITH THE DEFECT MO.CAN OBD.
MOTOGADGET ACCEPTS NO LIAB ILITY FOR DIR E CT OR INDIR E CT DAMAGE OR
SUBSEQUENT DAMAGE OF ANY K IND R E S ULTING FR OM THE US E , INS TALLATION OR
CONNECTION OF THE MO.CAN OB D OR OTHER DELIVERED EQUIPME NT. THIS E XCLUS ION
OF LIAB ILITY PAR TICULARLY INCLUDES DAMAGE TO PERSONS, MATERIAL LOSSE S AND
FINANCIAL DAMAGES.
THE USE OF THE DEVICE IN AR E AS OF PUB LIC TR AFFIC IS UNDE R TAK E N AT THE
USER’S OWN RISK.
Application area
mo.can OBD connects all instruments of the motoscope series from motogadget directly to the OBD Interface of Harley Davidson, model year 2004 and up. Installation and connection of additional sensors or other equipment is no longer necessary. Models coming with HD-LAN are not compatible.
Connection
Connect mo.can ODB and motoscope cable colours as shown in the table below.
Connect the cables properly with a solder, a crimp or a plug and socket
connection. Make sure the insulation of the connection is adequate. A weak
insulation may wear due to vibration. An inaccurate connection or insulation
can cause a short circuit or a malfunction of the motoscope.
An additional feature of mo.can OBD is its output for the vehicle warning
lamp. As long as an error code is set, the green cable of mo.can OBD will
drain to battery ground. At this cable you can connect a light bulb with max.
0,5W, a LED with series resistor or directly an indicator light of the
motogadget indicator light series (motosign, HD handlebar clamp). If the
Output is activated by the mo.can OBD, the connected light will flash.
Attention! Connecting mo.can’s green cable straight to +12V will destroy
this output.
Installation
Locate the “Data Link” interface connector. It is located under your seat or behind the side cover, depending on model and year
For the place of attachment consider a sufficient distance to hot engine or exhaust parts (max. ambient temperature in operation is 85°C). Attach the mo.can OBD with cable ties at the wiring loom or a frame tube. Install the cable for the motoscope along the vehicle harness. A sufficient strain relief and bend protection of the cables is important. At mechanically stressed areas an additional insulating may be necessary to prevent cable damage. Mechanical forces (pull, push or shock) act on the device must be avoided. If the installation electrical connection to the instrument is finished, plug mo.can’s connector into the “Data Link” interface.
Instrument Setup
Please adjust following settings: ImpW=4, ImpE=1 and Circ=2000mm.
mo.can cable| configuration| motoscope mini| motoscope
classic| motoscope tiny| SureShift| motoscope PRO|
Multiview
---|---|---|---|---|---|---|---
–| battery plus +12V| | –| red| –| red| –
red| switched plus +12V| red| red| brown| red| brown| red
black| vehicle earth| black| black| black| black| black| black
yellow| tacho signal| yellow| yellow| –| yellow| yellow| yellow
white| speed signal| white| orange| orange| white| white| white
green| output malfuction indicator lamp| see correction scheme
Declaration of Conformity
Hereby, motogadget GmbH declares the product is in compliance to EU
directives.
The full text of the EU Declaration of Conformity is available at the
following internet address:
https://manuals.motogadget.com/mo-can-obd
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>