Ameriwood Home 810563167 Drexel Seven Hills Columbia Walnut 2 Door Storage Cabinet Instruction Manual

Ameriwood Home 810563167 Drexel Seven Hills Columbia Walnut 2 Door

Storage Cabinet

Product Information

• Product Name: 7131222EBL Storage Cabinet
• Includes wall anchor kit for safety
• Manufacturer: Amberwood Home
• Assembly Difficulty: Easy
• Recommended number of people needed for assembly: 1-2
• Tools needed: Flat Head Screwdriver, #2 Phillips Head
• Screwdriver, and Hammer
• Cam Lock Fastening System used throughout the assembly process
• Back panel is made of paperboard construction

Product Usage Instructions

1. Before starting the assembly process, read through each step carefully and follow the proper order.
2. Separate and count all parts and hardware. Parts are labeled on the surface or edge of the part.
3. Give yourself enough room for the assembly process.
4. Use the recommended tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver, and Hammer. If using a power drill or power screwdriver for screwing, be sure to slow down and stop when the screw is tight to prevent stripping.
5. Do not use harsh chemicals or abrasive cleaners on the cabinet.
6. Assemble the cabinet according to the instructions provided with the Cam Lock Fastening System. Use caution when using a hammer to lightly tap the wood dowels into the holes during the assembly process.
7. Always face the point on the top of the Cam Lock towards the outer edge. Use all nails provided for the back panel and spread them out equally. The back panel must be used to ensure that the unit is sturdy.
8. Do not push, pull, or drag the furniture, and never climb on the cabinet.
9. Secure the cabinet with the wall anchor kit that is included with the product to prevent tipping and serious or fatal crushing injuries. The manufacturer assumes no liability for improper installation or excessive loads placed on screws or brackets. The wall anchor is not a substitute for proper adult supervision.
10. If you need assistance with assembly or have any questions about the product, contact Ameriwood Home’s customer service team. Do not return the product without first contacting customer service for help.
11. Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada.

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Secure Your Furniture

Keep your home and family safe with the wall anchor kit that is included with the product. Serious or fatal crushing injuries can occur from tipping furniture.

WARNING
Manufacturer assumes no liability for improper installation or excessive loads placed on screws or bracket. This wall anchor is not a substitute for proper adult supervision.

Follow Ameriwood Home

Contact Us!

Do NOT return this product!

Contact our friendly customer service team first for help.

Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada

Helpful Hints

PEOPLE NEEDED FOR ASSEMBLY

• * Open your item in the area you plan to keep it to avoid excessive heavy lifting.

  • Identify, sort and count the parts before attempting assembly.
  • Compression dowels are lightly tapped in with a hammer.
  • Slides are labeled with a R (right) and L (left) for proper placement.
  • Make sure to always face the point on the top of the Cam Lock towards the outer edge.
  • Use all the nails provided for the back panel and spread them out equally.
  • Back panel must be used to make sure your unit is sturdy.
  • Do NOT use harsh chemicals or abrasive cleaners on this item.
  • Never push, pull, or drag your furniture.

Before You Start

Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.

Cam Lock Fastening System

This Cam Lock Fastening System will be used throughout the assembly process.

Press parts together so CAM BOLT inserts into edge hole. Using a screwdriver, turn the CAM LOCK clockwise to lock the CAM LOCK and CAM BOLT into their holes and fastening parts together.

Before You Start

Please Note:
You may need to lightly tap the wood dowels into the holes during your assembly process.

2 people needed for assembly

CAUTION

Failure to use 2 people for assembly could result in unit damage or personal injury.

Board Identification

Not actual size

Board Identification

Not actual size

Part List

Actual Size

Not Actual Size

STEP1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

STEP 7

STEP 8

STEP 9

IMPORTANT
THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.

• Place the unit onto its front.
• Attach the back panel as shown nailing straight into the raw edges.
• Assure that the unit is square.
• Distance from corner to corner must be equal.

Flush bottom edge of the back panel with the bottom edge of bottom (D).

STEP 10

STEP 11

STEP 12

STEP 13

STEP 14

STEP 15

STEP 16

STEP 17

For Masonry, Concrete, or other wall materials:
Consult your local hardware store for appropriate anchors to securely attach the safety bracket.

IMPORTANT : THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.

WARNING
Serious or fatal crushing injuries can occur from furniture tip over.
To prevent tip over:

• Install tip over restraint provided
• Place heaviest items in the lowest drawers
• Unless specifically designed to accommodate, do not set TVs or other heavy objects on the top of this product
• Never allow children to climb or hang on drawers, door, or shelves
• Never open more than one drawer at a time
• Use of tip over restraints may only reduce, but not eliminate the risk of tip over.

OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket aligned in this location. To make driving the screw easier, you can drill a 1/8″ diameter pilot hole (3mm) through the safety bracket into the stud. Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not fully tightened in step 3.

OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move your unit aside. Drill a 3/16″ diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole until it is flush. Move your unit into location and fasten the wall bracket to the wall anchor with the screw. Tighten the screw that was not fully tightened in step 3.

STEP 18

STEP 19

STEP 20

STEP 21

Maximum Loads
This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury.

Warning: Risk of injury to persons – do not place a television on this furniture. This furniture is not approved for use with a television.

Certificate of Conformity

1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual.
2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).
3. This product is distributed by: Dorel Home Furnishings, Inc.
4.  Site of Manufacture: Cornwall, ON
5. See front page of instruction manual for date of manufacture.

• 410 East First Street South
• Wright City, MO
• 63390 636-745-3351

References

• Ameriwood Furniture | Living Room Furniture | Entertainment Centers
• Ameriwood Furniture | Living Room Furniture | Entertainment Centers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>