ARGOMTech ARG-HS-5066 TWS Earbuds User Guide
- June 13, 2024
- ARGOMTech
Table of Contents
ARGOMTech ARG-HS-5066 TWS Earbuds
Product Information
- Product Name: TWS Earbuds
- Model: ARG-HS-5066
FCC Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without any restrictions.
Product Usage Instructions
- Charge the earbuds fully before initial use.
- Turn on the Bluetooth function on your device (e.g., smartphone, tablet).
- Open the charging case and take out the earbuds.
- Press and hold the power button on each earbud to turn them on. You will hear a startup tone indicating the earbuds are ready to pair.
- On your device, go to the Bluetooth settings and search for available devices.
- Select “ARG-HS-5066” from the list of available devices to pair with the earbuds.
- Once connected, you can enjoy wireless audio playback and hands-free calling.
- To adjust the volume, use the volume controls on your device or the dedicated controls on the earbuds (if available).
- To pause or resume playback, press the multifunction button on either earbud once.
- To skip to the next track, double-press the multifunction button on the right earbud. To go back to the previous track, double-press the multifunction button on the left earbud.
- To answer or end a call, press the multifunction button on either earbud once.
- To reject an incoming call, press and hold the multifunction button on either earbud for a few seconds.
- When not in use, place the earbuds back into the charging case to ensure they are charged for the next use.
Package Content
- Wireless BT Earbuds
- Charging Case
- Three Sizes Silicon Ear Tips (S-M-L)
- Type-C USB Cable
- User Manual
Features
- TWS BT earbuds with high-definition stereo sound & ENC noise canceling technology for a crystal-Clear calling experience
- Low Latency Gaming Mode (50ms) for the ultimate sound and video sync experience
- Integrated front LED display for battery status
- IP×4 Water Resistant
- BT V5.3 technology
- 10m wireless range
- Comfortable and compact mini design
- 6 hours playtime + 14 additional hours with charging case
- Ability to use one or both earbuds
- Integrated multi-function touch control for music playback and call management
- Automatic pairing for an easy and hassle-free setup
- Hands-free function
Product Identification
- Charging Case
- Battery Status LED Display
- Charging Port (Type-C)
- Touch Control (MB)
- Magnetic Charging Points
USING INSTRUCTION
-
Power On/Off
Open the charging case, the earbuds will power on automatically and the left and right earbud will be connected once removed from the case. To power off, place earbuds back into the case and close it. To manually power on the earbuds, you can long press the MB button on both earbuds for 3 seconds. To manually power off the earbuds, you can long press the MFB button on both earbuds for 5 seconds. -
Pairing Earbuds to BT Devices
- Power on the earbuds using the method described above. The main earbud will flash red and blue alternately.
- Open your BT settings on your mobile device and search for “ARG-HS-5066BK” and connect to it. If a code is requested, type, “0000”
-
Answering/Ending/Rejecting a Call
For incoming calls, tap once on either earbuds’ multifunction button to answer. Double tap multifunction button again to hang up. Long press the multifunction button on either one of the earbuds for 1-2 seconds to reject incoming calls. -
Voice Assistant (For supported phones only)
In standby/music mode, triple tap the right multifunction button earbud to activate the phone’s voice assistant (Siri, S Voice, Google Assistant, etc). -
Gaming Mode Low Latency
For a better experience in video and audio sync applications, enable the Gaming Mode low latency feature. Triple tap the left multifunction button earbud to toggle to Gaming Mode. To go back to Music Mode, triple tap the left multifunction button earbud again. -
Music Playback Management
- Play/Pause: when music is playing, double tap the multifunction button on either one of earbuds to pause music. Double tap again to resume playback.
- Previous Song: in music state, long press the multifunction button on the left earbud for 2 seconds to switch to the last song.
- Next Song: in music state, long press the multifunction button on the right earbud for 2 seconds to switch to the next song.
- Volume Up: Press the right earbud once at a time to increase the volume.
- Volume Down: Press the left earbud once at a time to decrease the volume.
- Auto Play: after ending a phone call, it will revert back to the music mode automatically.
-
Charging the Rechargeable Case
- Using the supplied charging cable, connect the Type-C end to the bottom of the case and the other end to a USB power adapter (not supplied). To fully charge the case it can take up to 1.5 hours.
- Ensure to use nothing higher than DC 5V/1A. While the case is charging, the front LED Display will start flashing. Once fully charged, the LED Display will show 100 for 5 minutes and then will turn off.
-
Charging the Earbuds
When earbuds are low on battery, the red LED flashes once every 5 seconds. Place them inside the case to start charging. When the earbuds are charging the front case LED Display will come on. Once the earbuds are fully charged the case LED Display will turn off. -
Resetting Earbuds
If the earbuds become unstable or stop responding, unpair the connection from the mobile device. Then, press the MFB (Multi-Function Button) on both earbuds 6 times at the same time.
Safety Precautions
- Please follow the instructions of this user manual and do not disassemble or modify the device, otherwise it may cause failures and/or burnouts on the earbuds.
- Do not drop the product in any liquid or wash in water.
- Do not charge the earbuds with a charger which is over-voltage. Ensure vour charger is limited to 5V/1A or it will damage the battery.
- Please use or store products in room temperature environment. Do not place the device in an environment where the temperature is too high or too low (Below OC degrees or above 45C degrees).
- Do not block any mouth of earbuds, such as charging interface, LED indicator or microphone.
- Do not use the equipment in a thunderstorm environment. Thunderstorms may cause abnormal operation of the equipment, signal interruption, loss of signal, and other erratic behaviors.
FCC Statement
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>