ULTIMEA U2100 Nova S40 2.1 Channel Soundbar with Separate Subwoofer User Manual

ULTIMEA U2100 Nova S40 2.1 Channel Soundbar with Separate Subwoofer

ACCESSORIES LIST

• Subwoofer

• Soundbar
  

• Power Adaptor

• Stereo 3.5mm to 3.5mm Audio Cable

• HDMI Cable

• HDMI Adaptor

• Digital Optical Cable

• Remote Control

• Wall Mounted Kit

• Wall Bracket

• User Manual

SOUNDBAR CONTROLS

Control Panel

1. “ ”: Power Button
   Press to power on / Hold for 3 seconds to power off.

2. “ ”: Input Mode
   Press to switch channels: ARC-OPT(OPTICAL)-BT-AUX-USB.

3. “ ”: BT
   Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC / TV (BT ID: Nova S40).

4. “ ”: Volume Down

5. “ ”: Volume Up
   

Remote Control

1. “ ” : Power Button
   Press to power on / Hold for 3 seconds to power off.

2. “ ” : ARC
   Press to switch to ARC channel.

3. “ ”: BT
   Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC / TV (BT ID: Nova S40).

4. “ ”: OPT
   Press to switch to OPTICAL channel.

5. “ ”: AUX
   Press to switch to AUX channel.

6. “ ”: LED
   Press to turn on the LED, press again to turn off.

7. “ ”: USB
   Press to switch to USB channel.

8. “ ”: Volume Up

9. “ ”: Volume Down

10. “ ”: Previous
    For BT and USB mode only: Skip to previous track.

11. “ ”: Next
    For BT and USB mode only: Skip to next track.

12. “ ”: Play / Pause
    For BT and USB mode only.
    USB mode: Hold for 3 seconds to switch between single loop playback and list loop playback.

13. “ MOVIE”: MOVIE
    Press to switch to MOVIE mode, the display will show: .

14. “GAME ”: GAME
    Press to switch to GAME mode, the display will show: .

15. “MUSIC ”: MUSIC
    Press to switch to MUSIC mode, the display will show: .

16. “ ”: BASSMX
    Press to adjust bass level, the display will show: .

17. “ ”: Mute / Recover the volume.
    

CONNECT TO SUBWOOFER

CONNECT TO THE TV VIA ARC

Step 1:
Connect one end of the HDMI cable to the ARC/eARC port on the back of your TV.
Step 2:
Then connect the other end into the HDMI ARC port of the soundbar.

Step 3 :
Press “ARC” button on the remote control to select “ARC” input.

If there is no sound, try setting the TV audio output to PCM:
TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

Note : Please turn on the “CEC” function on your TV.
When ARC is connected, your TV remote control can control the soundbar and TV simultaneously:

1. Turn on/off
2. Adjust the volume

CONNECT TO THE TV VIA OPTICAL / AUX

1. Make sure the TV’s port is OPTICAL OUT, connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
2. Make sure the optical plug is inserted correctly as it shows in the picture. Do not insert the plug upside down and break the optical.
   Note : If audio is playing from the internal TV speakers, mute or minimize the TV volume.
   

Note : Please remember to unplug the AUX cable from TV and Soundbar when you want to switch to other mode.

1. Connect the 3.5mm to 3.5mm Audio Cable to your TV’s AUDIO OUT port.
2. Not support AUDIO IN port on TV.
   

In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

CONNECT TO BLUETOOTH

1. Press the “ ” button on the soundbar or remote control to enter Bluetooth pairing mode.
2. Open your phone’s Bluetooth settings, find and select “Nova S40” to connect the soundbar.
   Note : If it’s already in the Bluetooth mode and connected, press and hold “ ” button for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC / TV.
   

PLACEMENT OPTIONS

WALL MOUNT INSTALLATION

SPECIFICATIONS

Power Supply

| AC 100-240V, ~50/60Hz
Soundbar Drivers| (1.2″ x 3.8″) x 2 (Soundbar) + 5.25″ (Subwoofer)
Frequency Response| 45Hz – 18kHz
Standby Power| ＜0.5W
Operating Temperature| 0°C – 45°C / 32°F – 113°F
Bluetooth Vision| 5.3
Dimensions and Weight

Soundbar| 400(W) x 38(H) x 76(D)mm       15.7″ x 1.5″ x 3.0″
Subwoofer| 270(W) x 115(H) x 270(D)mm 10.5″ x 4.5″ x 10.6″
Packaging| 332(W) x 432(H) x190(D)mm 13.1″ x 17″ x 7.5″
Net Weight| 3.3kg / 7.28lbs
Gross Weight| 4.2kg / 9.26lbs

Prefer video tutorial?
Setup guidance video, USER MANUAL or Trouble Shooting on ULTIMEA website.

support.ultimea.com

SAFETY INSTRUCTIONS

Please read this user manual carefully and save it for future reference.

Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system
performance, and may void the warranty.

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g.
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
• The ideal operating temperature for this product and its accessories is between
• The adapter should be installed near the device and should be easily accessible. · Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

PROPER DISPOSAL INSTRUCTIONS

This mark shown on the product or its packaging, indicates that this product should not be disposed of with other household waste at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Waste Electrical & Electronic Equipment

Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC REGULATORY COMPLIANCE

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED WARNINGS

This device contains licence-exempt transmitter (s) / receiver (s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS (s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.

Declaration of Conformity

We (Manufacturer is responsible for this declaration) Dynanic (Shenzhen) Technology Limited (Company name)

20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District Shenzhen, China 518000 (Company address)

Declare under our sole responsibility that the product Trade Mark: ULTIMEA
Product Name: Nova S40 2.1 Channel Soundbar with Separate Subwoofer

Model No.: U2100
To which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/ 65/EU) product is responsible to affix CE marking, the following standards were applied:

EN 55032:2015/A11:2020
EN 55035:2017/A11:2020
ENIEC 61000-3-2:2021
EN 61000-3-3:2013/A1:2021
ETSIEN 301 489-1 V2.2.3(2019-11)
ETSIEN 301 489-17 V3.2.4(2020-09)
EN 300 328 V2.2.2(2019-07)
EN 50663:2017
ENIEC 62368-1:2020+A11:2020
IEC62321-3-1:2013
IEC 62321-4:2013+A1:2017
IEC 62321-5:2013
IEC 62321-6:2015
IEC 62321-7-1:2015
IEC 62321-7-2:2017
IEC 62321-8:2017

Full Name: Yoyo.Yu
Position: Approbation Manager
Signature:
Place/Date: Shenzhen, China/Dec. 25-2022
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Soundlab Technology Co.,Ltd. is under license. Other trademarks and trade names are those of their respective owners.

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, HDMl trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other.

If you need our support, kindly reach out to our service team. We are always glad to help.

+1 888-598-8875 (US)
Mon-Fri 9am-5pm (PST)
+49 89-628-25828 (EU)
Mon-Fri 9am-5pm (CET)

support@ultimea.de
support@ultimea.com

support.ultimea.com
support.ultimea.de

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>